• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps let your cat go in and out as they please without you having to let them in or out. They can also help stop your cat from urinating in the house.

Installing a cat flap on a upvc door panel is a lot easier than a glass door, however it requires some knowledge and the proper tools.

Measure the Door

The installation of a cat flap install flap in a front door could be difficult, but so long as the cat flap is of the appropriate one and you follow the directions, it shouldn't be too difficult. We will help you draw the shape using an jigsaw to cut the door's opening. Then, we'll finish the job by attaching the flap. This will ensure that the flap remains in place and shields the doors from damage caused by rain and wind.

To determine the size of the cat flap you require, take a measurement of your pet's width. This will ensure that the flap is large enough that your pet can go inside and out of the house without having to open and close the door each time, yet small enough to keep them from going too far in either direction.

If your kit comes with an illustration of the location to drill, you can put it on the door, and then draw a pencil around it. If your door has moulding or a sill at the bottom, be sure that you leave enough space between your cat and these elements.

Set a square to ensure that you're cutting properly and to make sure the hole is a good rectangle shape. When you are satisfied with the result, you can begin to remove the rest of the door material. If you have a set square then use it to ensure whether you're cutting in the right way and to make sure the hole is a proper rectangular shape. Once you are satisfied with the shape, you can begin to take off the remaining door material.

Draw a Line

The cat flap is a great way to allow your pet to go out and in without worrying about them being a nuisance to guests or leaving unwanted gifts in the home. It also prevents drafts and helps to keep the temperature in your home steady. However, installing the cat flap to your door can seem like an overwhelming task for those who've never done it before, leading many people to seek out a professional joiner or carpenter to do the job. This is an option but you can do it yourself, provided the tools are appropriate and the steps are followed.

Although this is much easier to do with a timber door, it is still possible in uPVC doors, but you must be careful to avoid damaging the doors as this will cause damage to the warranty. The first step is to take measurements of the door, making sure that it can be able to accommodate the new cat flap. This should be easy enough if you are using an ordinary uPVC door, but you may require more care if using an alternative type of door as these are more difficult to cut into than solid uPVC panels.

The next step is to measure the height of your cat's stomach. This is the amount of height between the floor and the underside of your cat's stomach. It is important to find an area on the door that will allow your pet to move through easily. Once you've figured out the measurements you'll be required to mark the space using a spirit level and a pencil so that you are certain that the hole will fit your cat.

Once you've marked the area, it's time to cut the hole. It is crucial to be patient and use a jigsaw in order to ensure that the cuts are clean and smooth not rough and uneven. This could damage your door. Be sure to wear safety glasses and a dust protection mask whenever using the jigsaw, as inhaling the sawdust could be harmful to your health. After you've finished the cutting, you'll need to smooth out the edges of the hole using sandpaper, so that your cat flap will fit easily.

Cut a Hole

It can be difficult to fit a cat flap into the door panel or double glazing unit. You might be tempted to tackle the job yourself, but unless have plenty of experience in DIY it is probably best to get an expert to complete the job for you. A faulty job can not only be unsightly, but also pose a security threat. It could allow cold air in when the cat is outdoors and hot air out when it is inside.

Mark the hole's position on the door with an eraser and a spirit level. This will ensure it is correctly positioned and aligns with the door's other parts. Make sure you have some sandpaper in your possession to smooth out any rough edges.

After the line is drawn, you can cut the hole using the jigsaw. Remember to wear the appropriate safety equipment when working with the power tool. If you are worried about the sound produced by the jigsaw, you can purchase a cordless version which is how much to install a cat flap quieter and easier to use.

It is important that you only remove the material needed to make the cat flap. A small amount of material will be needed to cover the thickness of the the cat flap itself but cutting off more than this could cause issues and harm the frame of the door.

If the upvc door is made of metal, or has a frame, it could interfere with the microchip flap. In this situation you'll need make an oversize hole to ensure that the metal does not get in contact with the walls of the flap.

If you are fitting a cat flap into an upvc door or a double glazed window with a metal frame then you'll need to talk to a specialist who can supply you with a new glass pane with the hole for the cat flap already drilled inside. It is cheaper to have this done instead of trying to install the flap to an existing glass pane that hasn't been designed specifically for the purpose.

Place the Flap

Cat flaps let your pet come and go at their own pace, giving them the freedom to lounge in the home whenever they're feeling like it. If you've got an upvc door panel with cat flap door it can be difficult to fit a cat flap, especially when you don't have a glass pane that can be cut to accommodate one. If you are willing to install a half-glazed uPVC replacement panel, it is possible to add an additional cat flap. It's not as simple as cutting a hole through the door though and there are a few things you'll need first to ensure that it's secure.

A composite, uPVC or GRP door panel is generally made up of a plastic skin that is bonded to an insulating polystyrene core. It is essential to be careful when cutting the material. This type of door has a template you can use to make the hole.

After you've marked the position of the hole in your door, it's now time to install the flap itself. You can purchase and install various models including basic push-button operated models to ones that are activated by microchips that only let in your pet. Whatever kind of cat flap you pick it's essential that your cat flap in upvc door panel; read the full info here, is able to use the flap comfortably without getting caught in the rain.

It's a good idea to choose a circular fitting rather than a square one, as circles can be more securely cut into the door glass. It's because square holes are more likely to break the glass when drilled. This is also a safer choice since you don't have to drill into the toughened glass, which could shatter and harm your pet or your family members. This is particularly important if you have a child or an elderly person living at home who could be injured by shards glass.