• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not decay or rust as aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and may even be fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good condition.

For single pane windows, it is fairly easy to replace them, and the new window is usually able to fit into the frame that was previously installed easily. If windows with double panes are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this situation you'll need to locate some plastic spacers that will assist the new pane to fit properly into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall on the fabric and not onto the floor, where they could be trampled under.

After the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to block drafts and water from entering the home until a professional is able to come out and repair the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the gap between the window and the door is substantial, you may need to consider a security screen that also has windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they are susceptible to a range of problems including sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. It's important to take action when you realize that your uPVC windows are falling down.

Repositioning the hinges can help fix a window that is sagging. You'll first need to open the windows to reach the frame. After that, using the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close the window and verify the an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure they remain in position.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. It is essential to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is usually due to screws that have loosened over time, but it can also be due to the handle mechanism getting worn out. Luckily, it's not difficult to fix the handle of a window repairs that is loose yourself. First, you'll need to shut the window and do an initial fitting. The corner joints of the sash must align with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle and then return the mechanism to its original the position it was in.

3. Water Leaks

It is essential to act if you wake up every morning to find mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home, and affect your ability to regulate the temperature of your home. The most common reason for leaking uPVC windows is that the sealant around the frame is damaged or not present.

This is a relatively easy fix that can be completed by any skilled DIYer. Depending on the severity of the issue is, old caulking may have to be removed. It is essential to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and could reduce your energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more severe instances, you may need to replace the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely the issue is more with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it opens in a breeze. Any competent DIYer can replace these in a matter of minutes.

Most households in the UK will have either top hung or side hung upvc window repairs windows that use hinges and, just like any mechanical component they can wear down over time. It is essentially a very simple procedure, but it is easier to do with someone else to assist in holding the frame in place.

Check that the uPVC hinges are closed and open in the correct direction. Look for the arrows that are on each hinge to determine which direction the window repairs should be opened.

The problem with the hinges on windows could be caused by improperly opening the window in a certain way or by poor installation at the factory. Sending us a photo through our website can often resolve the problem. We are happy to provide suggestions.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It can also stop corrosion and decrease the chance of sticking. This must be done at a minimum every year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges may also become disaligned as a result of wear, causing a gap where the sash meets frame. If they are beyond repair, it may be necessary to get them re-aligned. The interlock, which is on the hinge side of the window, can also be misaligned, and again it is possible to just give them a good clean, but in some cases it might be necessary to get them replaced.

The next most common reason for draughts is window seals, these are susceptible to being worn out or damaged over time, and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help to regulate indoor temperatures and lessen draughts.

Another, and most effective methods to reduce drafts is to use a draught excluder, these are typically fabric tubes filled with some sort of filler and can be positioned on the windowsill on top. They will help stop cold air from entering and keep your home warm and cosy!

With a little regular maintenance and repairs windows made of upvc will provide a great level of security and insulation for your home. It is essential to remember that all windows eventually become worn out, and it may be more cost-effective to simply replace them than to repair them. If you have any problems with your Upvc window, it's best to consult an expert as soon as you can.