• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The ghost installers near me Immobiliser

Ghost Immobiliser can safeguard your prized item from theft. This system is discreet & does not require additional key fobs in order to operate.

The device utilizes buttons on your vehicle (steering wheel doors, door panels, and the centre console) to create a unique changeable pin code sequence that can be up to 20 presses long. This will then allow your vehicle to start.

Simple PIN code Change Process

With the increasing rate of vehicle thefts, many owners are seeking to improve their security. There are many types of security devices that are sold aftermarket from tracking systems to alarms and immobilisers. However they do not all are equally effective in protecting your car. While a tracking device can assist you in locating your car in the case of theft, it does not stop the crime from occurring in the first place. Immobilisers, on the contrary does exactly what it says on the tin: it disables your car's engine so that it cannot be started. The Autowatch Ghost is one of the most sophisticated options available, making it almost impossible for thieves steal your car.

The ghost device uses the buttons on your car to create a unique sequence which must be entered to allow the engine to begin. This can be accomplished by using the window, heater or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their vehicle without the need to use the button sequence. This is especially useful if you need to hand your car over to a valet service or parking, as the immobiliser will still be activated, but not disabled.

The Ghost is an innovative and unique device that works with the buttons of your vehicle instead of as a standalone device. This means it's not only a highly effective protection against theft of your vehicle, but it can also be transferred onto any other vehicles you own, making it much more of an investment than a traditional steering wheel lock.

Small, weatherproof device

The Autowatch Ghost Immobiliser is a high-tech security device that shields your pride & joy from key cloning and hacking. It also stops ECU swapping. It is a tiny weatherproof device that connects with the ECU of your vehicle directly through the CAN bus to stop the motor. It can be placed in the vehicle without the need for additional wiring and has been extensively tested to ensure that it works with all vehicles. It is also immune to jamming devices, which are a common technique that car thieves use to get around immobilisers.

The benefit of CAN data over traditional systems is that they work silently. It can't be detected by sophisticated RF scanning or code-grabbing technology and is also undetectable by traditional diagnostic tools. The autowatch ghost immobiliser installation ferrari ghost installer doesn't use LED indicators and instead uses buttons on your vehicle, such as the steering wheel, centre console or door panels, to create an unique sequence of disarming. The sequence can be extended by 20 or more presses for extra security. The iPhone app lets you make only one, authenticated connection with a pairing code that is unique to the Ghost Immobiliser problems and the communication between the two is secured.

The Ghost also prevents car thieves from using the key to a new car or replacing the ECU to bypass the immobiliser to start the engine. The engine will only start only if a valid PIN has been entered. It is able to be operated temporarily in Valet/Service mode (with the appropriate parameters, like a 30mph speed limit) and, therefore, you can hand your car to valet or service without having to enter the code.

Each vehicle is tested

The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser for CANbus. It can be connected to the vehicle's wiring and also to the engine control unit (ECU). The device is able to intercept signals and stop your car from starting normally until you enter a custom code. The system can be turned on and off through your smartphone's app without the need for additional wires.

The factory-installed immobilisers function by using a transponder, which is integrated into the key. This transmits a signal to the ECU. The car will begin to start if the correct code is transmitted. If, however, the transponder from a different vehicle is used instead, the immobiliser won't recognize it. This allows the vehicle be started and stolen. The porsche 911 ghost installer immobiliser was developed by a South African company at the top of security systems for vehicles technology. It guards you against key cloning or hacking, and even key theft. The only way thieves could take your car is physically towing it away and even then, they wouldn't be able to drive it.

Ghost makes use of buttons in your vehicle, such as the indicator stalk, the steering wheel, and doors, to generate an individual PIN code that must be entered to use your car. This is not required to use extra hardware such as keys-fobs, and can be up to 20 presses long. It is also undetectable by diagnostic equipment and does transmit radio frequency signals, meaning thieves cannot make use of sophisticated RF scanners or code-grabbing technologies to detect that an installation has been made.

Ghost is harder to remove than car alarms that require disarming by pressing a series of buttons. This makes it a great addition to an GPS tracking device, which can be used to locate your vehicle after it's stolen.

Emergency PIN code override

You don't have to look far on social media to find stories or videos of vehicles that were stolen using the most advanced technology tools. Key-cloning devices, for instance, and hacking tools that allow them to start the car without the original keys.

The Ghost immobiliser helps combat this and gives you an additional layer of security to stop your vehicle from being stolen when it is targeted by thieves. It creates an individual pin code by pushing the buttons on your steering wheel, door panel, and on the centre console. The unique pin code is entered alongside the original key fob to prevent the engine from starting. The unique override pin can be found on a black card that you will receive after the installation. It is simple to remember since there are no LED indicators.

The device is hidden within the vehicle's wires and doesn't emit any radio signals, which means it cannot be recognized by criminals using diagnostic software that can detect the type of security system you have installed. This makes it an excellent alternative to a tracking device.

Unlike most other security systems that use a relay in the engine bay, CANBUS Immobilisers communicate with the vehicle's ECU and BCM via CAN data bus (brand dependent). This allows them to disable a vehicle completely, by sending an electronic block to the ECU and engine.

These systems can also be linked to an analog alarm immobiliser, tracker or alarm. This must be specified prior to installation. They also work with service/valet modes and is a great alternative to a tracker device when you bring your vehicle to the dealer for repairs to an electrical problem.

Service/Valet Mode

In recent years there has been a rise in the number of vehicles stolen without the owner's keys. It's now easier than ever before to steal your pride & joy with the availability of key cloning tools and door lock picks. To stop this, we now offer the Autowatch Ghost immobiliser that prevents your vehicle from being driven even if your keys have been copied or your vehicle has been hijacked.

It directly communicates with your car's ECU (Engine Control Unit) through the CAN data circuit. It's completely silent since it doesn't utilize radio frequencies or key fobs. This means it cannot be detected by diagnostics or any other car hacking devices. It also shields against the possibility of adding an additional key or replacing the ECU to get around the system as only the correct PIN code can allow the engine to start.

The device is hidden inside your vehicle and is accessible via buttons on your steering wheel, the centre console, and door panels. Before you can begin your vehicle, you must enter a unique, changeable PIN code up to 20 numbers.

This is the first aftermarket CAN-bus immobiliser for the market that was developed. It will stop your vehicle from being driven or started in the event that you do not enter a PIN code first. If the device is activated and you attempt to drive away, it will display an indication on your dash, which will flash regularly for around 300m. If you type in your PIN code during this time, it will disable the anti-hijack device and your car will continue to drive in the normal way. If you do not enter your PIN at this point, the indicator will continue to flash and will require a new PIN code for every attempt to start your car.