• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to go in and out whenever they want without needing to let them in or out. They also prevent your cat from peeing in the home.

Fitting a cat flap in a upvc door panel is much simpler than installing one in a glass door, but it does require some skills and the proper tools.

Take a measurement of the door

Fitting a cat flap in the door isn't easy however, as long as you select the right kind of cat flap, take your time and follow the steps provided it shouldn't be too much trouble. We will show how to trace the shape, using an jigsaw for cutting out the door's area and then complete the job by attaching the flap to the door. This will ensure that the flap stays in place and shields the door from wind and rain damaging the door.

The first step is measure the width of your pet in order to get an accurate measurement of the size of cat flap you will require. This will ensure that the flap is large enough to allow your pet to go inside and out of the house without needing to open and close the door each time, but it is also small enough to keep them from going too far in either direction.

If your kit has an illustration of the location to drill then you can stick it on the door and then draw around it. If your door has sill or moulding along the bottom edge of it ensure that you have enough space as this will ensure your cat's safety and prevent them gaining access to your home.

Then put on your eye protection and a dust mask. Then using a jigsaw begin cutting along the line that you have pencilled in. Don't push the blade too hard, as this will cause it to cut more quickly than you would like it to. If you own a square that you have cut, use it to check that you are cutting correctly and to ensure that the hole is a proper rectangle. Once you are satisfied with the shape, you can start to remove the remaining door material.

Draw a Line

The cat flap lets you to let your pet inside and outside without having to worry about unwanted visitors or unwelcome gifts. It also prevents drafts and helps to keep the temperature of your home steady. Fitting a cat flap to your door can be a daunting task to those who haven't done it before. Many people call an expert joiner or carpenter to do the work. It is an option, but you can do it yourself if the tools are right and the instructions are adhered to.

Although this is much simpler to accomplish with a wooden door, it is still feasible in uPVC doors, though you should be cautious not to damage the doors, as this can cause damage to the warranty. First, you must measure the door to make sure it will accommodate the new cat-flap. This isn't too difficult if you are using a standard uPVC door, but you may require more care if using an alternative type of back door with cat flap fitted since these can be more difficult to cut into than solid uPVC panels.

The next step is to measure the height of your cat's stomach. This is the height between the floor and the bottom of your cat's stomach. You will need to locate a space at the entrance that will allow your pet to move through easily. Once you've figured out the measurements you'll need to mark the area with a spirit level and a pencil, so that you know the opening will fit your cat.

After you have marked the area, it's time to cut out the hole. You will need to use an jigsaw. It is important that you take your time to ensure that the cuts are smooth and straight rather than uneven and rough, as this could damage your door. Wear safety glasses and a dust mask when working with a Jigsaw. Inhaling sawdust is dangerous for your health. After you have finished cutting the hole, you will require sandpaper for smoothing the edges so that the cat flap can be easily inserted into the hole.

Cut a Hole

The process of fitting a cat flap cost flap into an existing door panel or double glazing sealed unit is quite difficult. If you're not proficient in DIY, it's best to employ an expert to do the work for you. A shoddy job might not just be ugly, but it could also be a security risk as well as allowing cold air to enter when the cat flap installation near me is outside, and hot air to escape when inside.

The first thing you have to do is draw the position of the hole in the door using pencil and an ax level. This will ensure that it is properly located and is flush with all other parts of the door. Make sure you have sandpaper to smooth any rough edges.

After the line is drawn, you can cut the hole using the jigsaw. Remember to wear any safety gear for working with an electric tool. If you are concerned about the sound produced by the jigsaw, you can purchase an electric version that is much quieter and easier to use.

You should only remove the material that is required to make the cat flap. It is essential to leave some extra material for the wall thickness of the cat flap. However cutting off too much material can cause problems or even damage the frame of the door.

A door made of upvc could have a metal frame or panel within it that could interfere with the microchip cat flap and in this case you will need to cut an oversize hole to ensure the metal does not get in contact with the wall of the cat flap, if this is the case, it is important to fill in the gap and seal it with water.

If you are fitting an animal flap to the frame of a double-glazed window with a frame made of metal, you will need to speak to a professional who will supply you with a new glass pane that already has the hole for the cat flap premade in it. This will be cheaper than trying to fit the flap into an existing pane that was not designed for this purpose.

Install the Flap

Cat flaps allow your pet the freedom to go and come anytime they want, allowing them to relax in the home whenever they like. If you have an upvc door panels with cat flap front door, it may be difficult to install a cat flap. This is especially the case when you don't have an glass panel that can be cut. If you're willing to buy and install a replacement half-glazed uPVC panel, it's possible to add the cat flap to these doors. It's not a matter of cutting an opening in the door. It is also necessary to take a few steps to ensure it's safe.

A composite, uPVC, or GRP door panel is typically made up of a plastic skin that is attached to an insulating polystyrene core. The material is extremely fragile and care should be taken when cutting into it to avoid damaging. This kind of door has a template can be used to cut the hole.

Once you have marked the position of the hole in your door, it's time to put in the cat flap. You can buy and fit various models, from basic button operated ones to microchip activated units that only let in your pet. However, regardless of what type of cat flap you choose it is essential to ensure that your cat can use the flap without getting stuck outside in the rain.

A circular fitting is better than a square one, as circles can be cut more securely into the glass. This is because square holes can make the glass more susceptible to cracking if drills are used on it. This is also a safer choice because you won't need to drill into the toughened glass that could shatter and harm your pet or family members. This is particularly important if there are elderly or children at home who might be injured by glass shards.