• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not decay or rust as aluminum and timber.

It is important to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. You should take the time to ensure that your windows are in good condition.

For single pane windows it is relatively easy to replace them, and the new window is usually able to fit into the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it will be more difficult to remove and replace the old panes. In this situation, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass by yourself. It is also a good idea to lay down a dropcloth before you begin working on the glass, so that any shards fall onto the fabric instead of onto the floor where they can be trodden under and cause further damage.

After the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to block drafts and water from entering the home until a professional can come out and fix the window. This will also act as a barrier, preventing any intruders from getting access into your home. If the gap between the window and the door is significant, repair double glazing window you may prefer an alarm system that has windows. This will provide the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. As time passes, they may develop a number of problems such as sagging. A sagging window can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from worsening.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll need to open the window to get to the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after having repositioned your hinges. If you're happy with the fit, tighten the screws to ensure that they stay in the right place.

If you are unable to move the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to lose tightness. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it can be due to the mechanism of the handle getting worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close your window and do an initial test fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it does not you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is important to take action if you awake each day to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be done by any DIYer who is competent. Depending on the severity of the problem the old caulking might need to be removed before a fresh layer is applied. It is important to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is important to check that any drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious instances, you may need to think about replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed local window repair, it is more likely that the problem is with the seal than the frame. Again this can easily be fixed by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it opens in an ease. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Most households in the UK will have either top hung or side hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. It is essentially a simple procedure, but it is easier when you have a person to help hold the frame in place.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a particular way or by improper installation in the factory. This can often be resolved by sending us a photograph through our website and we will be more than happy to give you suggestions.

Regular lubrication of the hinges is essential. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It can also prevent corrosion and decrease the chance of sticking. Ideally, you should perform this every year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. The hinges can also become disaligned as a result of wear, causing an opening between the frame and sash. They can be fixed by giving them a good cleaning, but in the event that they are beyond repair it could be necessary to have them re-aligned or replaced. Secondly the interlock, this is located on the hinge side of the window and can also become misaligned, again it is possible to just give them a clean but in some instances it could be necessary to have these replaced.

The second most frequent reason for draughts is window seals, these are susceptible to being worn out or damaged over time, and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures, and also reduce the possibility of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be put on top of your window sill. These will keep your home warm by blocking cold air.

The windows made of upvc can remain a great source of insulation and security in your home by performing regular maintenance and repairs. It is important to remember that all windows eventually become worn out, and it could be more cost-effective to replace them rather than repair double glazing window them. If you have any problems with your window made of upvc it is recommended to speak with a professional as soon as you can.