• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they don't get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and may even be fatal. It is important to take the time to ensure that you're doing everything you can to ensure that your windows are in good repair.

For single pane windows, it can be relatively simple to replace windows, and the new one is usually able to fit into the old frame very easily. However when you have repairing double glazed windows pane windows that are anchored by internal beading, it will be more difficult to remove the old panes and put in new ones. In this case, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

If you're planning to attempt to remove the window panes by yourself it is important to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also a good idea to lay down a drop cloth before you start working on the glass so that any shards fall onto the cloth instead of onto the floor, where they could be trampled upon and cause further damage.

It's a great idea cover the gap with tape after the glass has been removed. This will keep water and drafts from entering your property until a professional is able to fix the window. This will also provide an obstacle to stop intruders from making their way into your home. If the gap is particularly large, you may think about a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. In time, they could be affected by a variety of issues such as sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. It is crucial to act as soon as you notice your uPVC windows are sliding.

Repositioning the hinges can help fix a window that is sagging. First, you'll need to unblock the windows so you can access the frame. After that, using the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and test it for fitting. If you're satisfied with the fit, you can tighten the screws until they stay in the right place.

If you are unable to reposition the hinges, you might have to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to lose tightness. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen. Often this is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need to shut the window and then perform a test fitting. The corners of the sash need to align with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the issue the caulking that was used up may require removal before a new layer of caulk can be applied. When it comes to uPVC repair, you must avoid over-caulking. This will make your window more difficult to clean and reduce its energy efficiency.

It is important to check that the drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotted sills are also signs of water leakage. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely the issue is more related to the seal, not the frame. Again this can easily be corrected by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open with a breeze it could be hinges that are at the fault. These are easily repaired by any skilled DIYer and can be done within a few minutes.

Like all mechanical parts hinges are prone to wear out over time. It's very simple to change the hinges on a window however it is simpler if you have someone to help hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. You can do this by looking for the arrows on each hinge, this indicates which way the window should open.

The issue could be caused either by opening the window incorrectly or a faulty installation in the factory. Sending us a photo via our website is often enough to solve the issue. We are happy to provide suggestions.

It is also crucial to grease the hinges on a regular basis. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window open and close more easily. It can also stop corrosion and decrease the chance of sticking. It is recommended to do this at least once a year. WD40 and other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different things. Firstly the hinges, again due to wear and Repairs to uPVC Windows tear could become misaligned. This can cause an opening to appear between the sash and the frame. This can be easily fixed by giving them a thorough clean, however in the event that they are beyond repair it may be necessary to have them re-aligned or replaced. Second, the interlock can also become disaligned. It is located on the hinge's side, and might require to be cleaned. In some instances, it may be necessary to replace them.

The second most frequent cause of draughts is the window seals. These are prone to wear or damaged over time, and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures, and Repairs to uPVC Windows reduce draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. These will keep your home warm by blocking cold air.

Your upvc windows can keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is crucial to recognise that all windows have a lifespan and there may come a point where it is more economical to replace them than repair them. So, if you're having issues with your upvc windows, it is always best to seek professional assistance as soon as you can.