• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions from theft by using the Ghost Immobiliser. This system is discrete and doesn't require additional key fobs in order to operate.

The device utilizes buttons on your vehicle (steering wheel, door panels & centre console) to create a unique pin code sequence that can be up to 20 presses. This will then allow the vehicle to start.

Simple PIN Code Change Process

With the increasing rate of vehicle theft, a lot of owners are looking to improve their security. There are a variety of security gadgets that are sold aftermarket that range from tracking systems to alarms and immobilisers. Not all of them are equally effective in protecting your vehicle. A tracking system can aid in finding your car if it is stolen however it cannot stop the crime. An immobiliser, on contrary, does exactly what it says on the label: it shuts off your car's engine so that it is unable to be started. The autowatch ghost immobiliser Ghost is one of the most advanced options available, making it nearly impossible for thieves steal your vehicle.

The ghost device uses the buttons on your car to generate a unique sequence which must be entered in order for the engine to begin. This can be done using the indicator stalk, window or heater buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their vehicle without having to use the button sequence. This feature is particularly useful when you need to give your car away for valet parking or servicing, as the immobiliser will still be active and not deactivated.

The ghost immobiliser installation is a truly unique and ingenious device that is used in conjunction with the buttons of your car rather than being a standalone unit. This means it's not only a highly effective security measure against theft from your vehicle but also a transferable device onto any other vehicles you have, making it more of an investment than traditional steering wheel locks.

Weatherproof small device

The Autowatch Ghost Installers ghost 2 immobiliser problems immobiliser is an advanced security device that protects your car from key cloning, hacking and ECU swapping. It's a weatherproof and small device that connects directly to your vehicle's ECU via the CAN data bus to shut down the engine. It can be plugged into the vehicle without additional wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant to jamming devices which is the most common method used by thieves to get around the immobilisers in place.

The advantage of using CAN data is that it operates in a silent manner in comparison to conventional systems. It isn't detected by sophisticated RF scanning and code-grabbing techniques and cannot be identified by conventional diagnostic tools. The Autowatch Ghost does not employ LED indicators, but instead uses buttons in your vehicle, such as the steering wheel, centre console or doors, to create a unique disarming sequence. The sequence can be extended by 20 presses to provide additional security. The iPhone app only allows one connection, using a unique pairing code for the Ghost. All communication between the two devices is protected.

The Ghost also prevents car thieves from using the key to a new car or replacing the ECU to bypass the immobiliser to start the engine. The engine will only start when a valid PIN code is entered. It can also be put into Valet/Service mode for temporary operation (with set parameters such as 30mph speed limit) so that you can give your car to a valet service or to be serviced without needing to enter a PIN.

Tested for each vehicle

The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device snoops on electronic signals to block the system of your vehicle from running its normal startup routine until you input an individual passcode. The system can be turned on and off by using your smartphone's application without the need for additional wires.

Standard factory immobilisers on automobiles function through an electronic transponder in the key that sends an electronic signal to the ECU. If the correct code is sent the car will begin, but if a transponder is replaced by one from a different vehicle, the immobiliser will not recognise it. This makes it possible for the vehicle to start and be stolen. The Ghost immobiliser has been developed by an South African company at the top of the line in vehicle security technology. It protects you from hacking or key cloning, and even key theft. The only way that a burglar could steal your car is physically towing it away and even then they wouldn't be allowed to drive it.

Ghost makes use of buttons on your vehicle, such as the indicator stalk, steering wheel, and the door panels, to create unique PIN codes which must be entered to use your car. It does this without extra hardware, such as key fobs. It can take up 20 to 20 presses. It is also undetectable by equipment for diagnostics and does transmit radio frequency signals, which means thieves cannot use sophisticated RF scanners or code-grabbing technologies to identify that an installation has been made.

Ghost is harder to remove than car alarms that require disarming with a series of buttons. This makes it an excellent complement to a GPS tracker that can assist in locating your vehicle after it has been taken.

Override of emergency PIN code

You don't have to look too far on social media sites to find stories or even videos of vehicles that have been stolen by thieves using the most advanced technology tools available to them. This includes key-cloning and hacking tools that allow you to start your car without your original key fobs.

The Ghost immobiliser has been specifically designed to prevent this, and give you an extra layer of security in order to keep your vehicle from being targeted by thieves. It creates a unique pin code when pushing the buttons on your steering wheel, door panel, and on the centre console. This unique PIN must be entered together with your original key fob in order to stop the vehicle from starting. The unique override PIN can be found on the black card that you will receive following your installation and is easy to remember since there aren't any LEDs.

The device is hidden inside the vehicle's wires, and does not emit radio signals, so it can't be detected by modern thieves using diagnostic software that is able to identify the security system you have installed. This makes it a great alternative to an alarm.

Contrary to other security systems that rely on a relay located in the engine bays, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to shut down the vehicle completely by sending a digital block to the ECU and engine.

It is also possible to connect an analog immobiliser, alarm, or tracker with these systems but this must be stated prior to the installation of the device. They are also service/valet-mode compatible and are a great alternative to a tracker when you are taking your car in for repairs to an electrical issue at the dealer.

Service/Valet mode

In recent times, there has been a rise in the number of vehicles stolen without the owner's keys. With easy access to key cloning equipment and door lock pick sets it is now easier than ever for thieves to take your joy and pride. We've developed the Autowatch ghost alarm installation near me Immobiliser to combat this. It prevents your vehicle from being driven even if your keys have been cloned.

It communicates directly to your vehicle's ECU (Engine Control Unit) via the CAN data circuit. It's completely silent as it doesn't use radio frequencies or key fobs. This means that it can't be detected by diagnostics or other vehicle hacking devices. It also stops the user from using an ECU or key to bypass the system, as only the PIN code allows the engine to be started.

The device is hidden within your car by using buttons on the steering wheel, the centre console and door panels. A unique & changeable PIN code sequence of up to 20 digits has to be entered prior to being able to start your car.

This is the first aftermarket CAN bus immobiliser to be created that will stop your car being driven away or started without a PIN code being entered before. If the device is in armed and you attempt to drive away, it will display an indication on your dash which will flash continuously for about 300m, if you enter your PIN code at this point it will deactivate the anti-hijack and your car will continue to drive as normal. If you don't enter your PIN at this point, the indicator will continue to flash and will require a new PIN code every time you attempt to start your car.