• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Patio Door Lock Repairs

Over time, patio doors experience wear and tear that could lead to locks that fail. There are fortunately, a number of simple and effective ways to restore your uPVC patio door's security.

These simple fixes can make your home safer regardless of whether you re-align the lock or clean the mechanism.

Clean the Lock

While patio doors are an excellent way to let in the outside and keep out the elements but they can also pose an issue for security when your lock isn't functioning as it should. Over time, wear, tear, hot and cold weather, dirt, and debris can cause your patio door lock to become difficult to operate. With some minor maintenance, you can ensure your patio door's locks will always perform properly.

In the beginning, it's important to clean your patio door's lock and all its moving parts. This will help get rid of any grime and coatings that could be preventing the lock from working in the way it should. Start by wiping the moving parts of the lock for your patio door with a damp cloth. Then you can use a scouring paper or a rough damp cloth to scrub the dirt-infested parts of the frame and door. Then clean the lock with a dry towel to remove any remaining moisture. Let it air dry before using it.

If you have an exterior door that is fitted with a pin tumbler latch mechanism You can lubricate the lock by applying powdered graphite to the key or using a lubricant made of Teflon, like WD-40 Multi-Use. This type of lubricant is able to be applied with ease and will not disintegrate over time. If you're not able to find an appropriate lubricant you could try using a pencil with a thick tip. Place the pencil in the lock and jiggle it around a bit to distribute the graphite.

Regular maintenance is also required to keep the tracks of sliding patio doors free of dust, dirt and other debris. These tracks are particularly vulnerable to snow, ice, and other debris that can cause them get stuck or to bind. This could make it difficult for your patio door to be opened and closed.

Sliding patio door track rails and rollers can be cleaned by removing any weather stripping that is damaged or dirty and then cleaning it, before installing it. The same applies to patio door rollers which can be cleaned and sprayed with a non-stick lubricant that will allow them to move freely.

Lubricate the moving parts

uPVC french doors, similar to sliding patio doors, work with 3 to 4 or sometimes 5-point locking mechanisms which include the lock cylinder and handle operated by keys. They require maintenance and lubrication of the moving parts. This can be accomplished with a thin oil but not WD40. It should be done at least once a year.

If sagging hinges don't cause the problem it could be because the door is not aligned. It could be rubbing or catching the hole of the strike plate in the frame. The solution is to remove the strike plate, tilt and slide patio door repairs then use an abrasive chisel to increase the size of the mortise it sits in. This allows the latch to fit perfectly in the hole and prevents getting caught or rubbing against the frame.

Once the cylinder is cleared of the way take a measurement of its width using an object or a piece of wood that can fit into the gap between the adjustment screw and the lock. The outer dimension is measured from the outside of the door to the center of cylinder. The inner dimension is measured from the center adjustment screw to the end cylinder.

Check the lock's length

If your patio door latch is difficult to turn even after oiling and cleaning it could be because it is not aligned with the strike plate. Check if your door is properly balanced and if the hinge screws are tight. In many instances, moving the strike plate upwards or downwards can fix the problem.

The latch may not be able to engage properly in the event that the strike of the lock is too small. In this situation you'll have to increase the hole using a chisel or hammer and then test the latch to ensure that it is able to engage the strike plate in a smooth manner without rubbing against or getting caught on the door's frame jamb.

You should identify the type mortise lock you have before buying the replacement. You can do this by looking at the faceplate of the lock and determining whether it is round or square. Take a look at each screw hole on the current lock and note their dimensions. This information will allow you to find a replacement lock that is exactly the same size and will fit in your existing hole.

You'll need to locate the mortise lock and examine it for bends, scratches or other damage that requires to be repaired. A damaged or bent latch is more likely break than one that hasn't been used much, so be sure to replace the lock with a brand new one that is secure when you spot any indications of damage or wear.

After you've determined the type of lock replacement you require It's time to start the actual repair. The old handle and spindle must be removed from the patio door repair company near me door. Install the new handle. Start by installing the interior handle. Align it with the spindle, and then secure it in place using the two bolts or screws. Once the handle in the interior is in, install the exterior handle and screw it into place, too. After you've completed these steps you can test the new handles to ensure that they are able to open and close with ease and that the latch locks correctly when you strike the plate.

Check the Strike on the door.

The strike plate and the door latch are two parts that work together to secure the door. Misaligned strike plate and door latches can result in the latch not being able to latch the door in a proper manner. Fortunately, this problem is often easy to fix.

First, examine the holes in the strike plate's receiving to ensure that they are free of obstructions such as dirt or plastic plugs. Loosen the keeper screws holding the strike plate in place. This will allow it to move vertically, but not separate it from the frame. Adjust the strike plate so that it aligns its holes for receiving with the latch hooks of the door latch. After the strike plate has been adjusted then tighten the screws and test the door to see whether it locks smoothly after the new adjustment.

Door strike plates can be difficult to locate for homeowners with sliding patio sliding doors repair doors, but they are essential for locking and unlocking your door. The plates made of metal are located at the top and bottom jambs of the door, where they serve as the support for the latch. The door latch is inserted into the strike plate, and it creates the seal. If the strike plate is damaged or rusted or not properly installed the latch may not properly lock the door.

A misalignment between the latch and strike plate is a common reason for the patio lock to not close or stay. This can be verified using the "lipstick" test. Rub some lipstick on the outside of the deadbolt and then cover it with masking tape. The lipstick will leave an impression when you close the door. This will indicate exactly where the latch joins the strike plate. If the mark is too high or low you can alter the strike plate.

If your patio door locks for sliding are not working properly they can help keep your home safe from burglars. It is imperative to repair the issue as soon as possible. By following these simple steps, you'll be able to fix the lock on your patio door and restore its functionality in a matter of minutes.