• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Patio Doors Repair - How to Fix a Wet Dog and Save Your Dog From Cold, Wet Feet

patio repair near me doors create a convenient and comfortable transition between your home and outdoor space. They can also help you save money on cooling and heating bills by keeping air within your home.

But with time, your sliding glass or French doors may lose their shine. Fortunately, simple fixes can keep them looking and functioning as new.

Weatherstripping

It's 5 AM and you're letting your dog out for his morning jog when you stumble into a puddle of water right by your sliding patio doors. You look around and discover that last night's rain blew in through the patio door seals. This is not going to be an easy task. With a little patience, and a few basic tools to fix it, you can get it fixed and keep your dog's feet from becoming wet and cold.

It is important to replace the weatherstripping that closes the gap between your door and jamb. This will keep out drafts, pests and moisture. It also helps keep your energy bills lower. A quick inspection of your windows or doors will show you if the weatherstripping is in good shape or needs replacing.

There are many types of weatherstripping, such as felt, open-cell foam, thermoplastic rubber, as well as metals such as bronze or copper. Each type has advantages and disadvantages. Felt and open cell foam are cheap, but they tend to be ineffective and noticeable at blocking airflow. Vinyl is more expensive, however, it's more durable and resistant to moisture. Rubber is a great option for areas that have heavy traffic since it will not wear out as quickly.

To install new weatherstripping, first remove the patio door from the frame by loosening the roller adjustment screws using the help of a screwdriver. Then using a flathead screwdriver, remove the plugs that keep the weatherstripping in place at the bottom of the frame. Then, pull out the weatherstripping from the previous frame and scrape any adhesive from the bottom of the frame. Then, cut the new to the proper length, then peel back the plastic strip on one end and apply it to the jamb with the putty knife.

Reinstall the door and adjust the roller screws to ensure it sits properly in the track. Apply waterproof caulk where the stationary panel obstructs the sliding doors and where the edge of the panel meets the frame. This is not as secure a seal than the weatherstripping, but it should work for a while.

Handles and Locks

Locks and handles for your patio door are crucial to the security of your home. Over time, they can get damaged or worn out and require replacement. The spindle that connects the interior and exterior handles could also need to be changed.

To replace a patio door handle, first remove the old one by unscrewing the screws that are holding it in place. Once the old handle is removed using a level, make sure the patio door is straight before installing the new handle. If the door isn't straight it could hinder the lock and cause issues later on.

Close and open the handle a few times after installing it to ensure it's functioning properly. If you have any problems you are having trouble, contact the manufacturer or a professional in the field for assistance. To avoid problems in the future, it is a good idea to also lubricate your lock mechanism using lubricant made of silicone.

The most popular type of patio door lock is a mortise latch. It's typically made of steel and fits inside a pocket carved into the door frame. These kinds of locks are found on aluminum sliding and wood doors. When replacing a mortise lock, it is important to take a few measurements prior to ordering a new one. It is essential to be aware of the location of the mounting holes as well as the location within the keyway lock.

Some patio door handles have an locking mechanism that is built into the handle. The handles have a rectangular key cylinder which is inserted into the handle's keyway. If you have this type of patio door both the outside and inside locks are combined into one. This type of patio doors is typically found on sliding aluminum doors.

If your patio door latch doesn't stay latched it could be because the lock tongue isn't grasping the hasp of the jamb correctly. Another possibility is that your sliding door isn't parallel to the jamb's side. You can open the door for an inch, and spot it against the frame. This will tell you if there is a gap between the door jamb and the door. If there is a gap, adjust the rollers at the bottom left or the right side of the patio to make it exactly parallel to the jamb.

Misalignment

In time, the rollers and tracks of the door may lose their alignment. This can cause the door to stick or become difficult to move. It could also allow cold air and draughts to infiltrate your home, which could reduce energy efficiency. Misalignment can be easily fixed and prevented. Applying a silicone-based grease the tracks and rollers can allow your doors to glide again. It's a good idea to do this periodically to keep your doors in peak operating condition.

A damaged screen could also be a problem. It could be a hassle or risky. In addition, it can hinder the doors from opening and closing correctly, which could lead to loss of energy. In some cases the screen can be repaired however in other instances, the door has to be replaced. If you're experiencing a tear in your screen, make sure you clean it thoroughly and try to avoid turning the handles of the door the wrong way when you open and close the door.

Over time, hinges will loosen due to wear and tear or excessive usage. Regularly tightening the screws will aid in fixing this issue and ensure that your doors close tightly. It's an easy task you can perform yourself. If you're not confident doing it yourself, you must seek out a professional.

It's also a good idea to regularly clean your patio doors track and rollers. A simple vacuuming or brushing can get rid of dust and debris that could hinder the smooth operation of your patio doors. You can utilize a special tool to remove stubborn dirt or rust. Inspecting and tightening the screws on the hinges can aid in re-alignment, but sometimes it's necessary to replace them completely to ensure a strong, solid seal.

If the frames of your patio door lock repair doors are warped or sagging, this can affect their alignment and performance. Warping or shifting can be caused by foundation changes, but it can also occur from poor installation or repeated use. A professional can replace or repair your patio door repairs door frame and make sure it is properly aligned. This will allow it to perform its best.

Rollers

Patio doors that slide are great to let the outside in and providing plenty of natural light, however they do require some attention to ensure they are sliding smoothly. If you need to pull the handle hard to get the door to move, or it doesn't move as smoothly as it used to it could be due to the rollers. In time the lower track could get clogged by dirt, dirt, and sand. This makes it difficult for rollers to move. You can try cleaning it and spraying it with a lubricant such as 2Slick.

If the tracks have been cleaned but the rollers aren't moving freely, then it's time to replace them. Replacement rollers are available for your door and track. You can purchase them at most hardware stores however, you will require someone to assist you in removing and reinstall the rollers. Before ordering replacements, get a good picture of the roller assembly that is mounted in the door frame so experts can determine the exact model and type you need. They can also search for identifying characteristics such as bumps, dimples and flared edges and cut-outs that could narrow your replacement options.

After replacing the rollers, you will need to reinstall the sliding door back into its frame. Get some help in this regard as the door is quite heavy. Make sure there are screws securing the track to either side of the frame. If they are, make sure they are loose enough for the door's bottom to drop into the channel above the frame. Remove the screen door from the opening. Make sure that it is free of the track tracks, rollers and track.

After you have installed the new rollers, gently slide the door into the frame. Then, you can gently lower it to ensure it is secured. If the rollers are adjustable you can adjust them to ensure that the door has enough clearance.