• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help prevent unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames that were previously in use very easily. If you have double-paned windows which are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation, you will need to find some plastic spacers to assist the new pane to fit properly into the frame of the window.

If you plan to attempt to remove the glass panes yourself it is important to wear the proper safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards of glass fall onto the fabric, not onto the floor and could be trampled under.

After the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to block water and drafts from entering the property until a professional can come out and repair the window. This will also provide an obstruction to prevent intruders from getting into your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

upvc window repairs is durable, energy-efficient and affordable alternative to timber sash window. However, with time, they may be afflicted by a variety of issues like sliding. A window that is sagging can cause problems with light, draughts, and even security. If you find that your upvc window repairs near me window is beginning to lose its shape, it's crucial to act fast to prevent the problem from worsening.

Repositioning the hinges could aid in fixing a window which is sagging. To accomplish this, you'll need to open the window so that you can get to the frame. Then, you can remove the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, window Repairs close the window and verify the an appropriate fit. If you are happy with the size of the window, you can tighten screws to keep them in the right position.

If you aren't able to move the hinges, you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to lose their tightness. It is crucial to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. Most often, this is caused by screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and perform a test fitting. The corner joints of the sash should align with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and mouldy walls every time it rains it's important to take action. Water leaks from windows can not only cause destruction of your home's structure but also hamper your efforts to control the temperature in your home. The most frequent reason for window repairs leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a fairly simple fix that can be completed by any competent DIYer. Depending on how serious the problem is, the old caulking may need to be removed. It is essential to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes are free of debris in them and that the sill pan is properly angled to allow the water to drain from the window. In more extreme instances, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage occurs between the double-glazed window, it is more likely that the issue is related to the seal, not the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open in a breeze, it may be hinges that are at the fault. They can be easily replaced by any competent DIYer and can be completed in just a few minutes.

Like any mechanical component, hinges can be damaged over time. The process of replacing a hinge on a window is an easy procedure, but it is simpler when you have a person to assist in holding the frame up.

Verify that the uPVC hinges open and close in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue could be caused either due to opening the window in the wrong way or by a poor installation in the factory. This issue can be fixed by sending us a picture through our website and we will be pleased to offer you advice.

Regular lubrication of the hinges is also necessary. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the risk of a window sticking and prevent corrosion. Ideally, you should do this at least once a year. WD40 or other solvent-based oils should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by various factors. The hinges, also because of wear and tear, can become misaligned, this will cause gaps to develop where the sash joins the frame. These can be easily fixed by giving them a good cleaning, but when they're beyond repair, it could be necessary to get them aligned or replaced. The interlock, which is located on the hinge of the window and can also be misaligned, and again it's feasible to give them a clean but in certain cases, it may be necessary to have these replaced.

The next common cause of draughts is the window seals. They are susceptible to being worn out or damaged over time and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and again will reduce the risk of draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. They can help stop cold air from entering and keep your home warm and cozy!

Your upvc windows can continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is important to remember that all windows eventually become worn out, and it could be more cost-effective to simply replace them rather than repair them. If you are experiencing issues with your upvc window it is recommended to speak with a professional as soon as you can.