• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sash Window Repair

Sash windows may become out of balance, or even break. Pam is on the lookout on the internet for wavy glasses that are salvaged and keeps an eye out for discarded sashweights made of metal. She then searches for replacements, like washers or nuts, to help balance her window.

Pam will set each pan by putting a rope of glazing material into the rabbet groove or pocket around the opening. This prevents drafts and costly heat loss.

Sticking Sashes

It's a nightmare if your double-hung windows get stuck. They'll shake during storms and you'll lose your view. On the other side, a window that's too loose can let outside air and noise in and your energy costs could increase. Neither scenario is optimal, but both can be fixed with the appropriate tools and perseverance.

A common issue with old windows with weighted sash is that paint could get sucked into the channels they slide on, causing them jam. Luckily, most issues with this can be resolved by cleaning and lubricating the tracks.

Remove the caulking that was used in the space between the window stop (the one on the inside) and the frame of the window. Scrape away any paint that has accumulated. Make use of a sharp knife and put sheets of plastic as well as an air-collecting vacuum cleaner beneath the surface to collect any paint dust or chips.

Clean the tracks with a dry cloth, and then apply a silicone-based lubricant that will help them slide better. You can purchase this in the majority of home improvement stores or on the internet. You can test it by moving the sash upwards or downwards.

If it continues to stop, the sash cable may be defective. Verify if the cord is catching or hanging in the sash, or has snapped completely. If this is the situation, you'll need to reconnect the window.

Another possible reason for a jam is the pin that holds the rail in place has slipped out. This isn't easy to fix, and you'll need to consult an expert in most instances.

If a pin doesn't fall out, but the wood has become swollen or warped, it's recommended to use a wood hardener on it. It's a quick drying liquid that can help restore damaged wood, which means you'll be able to repair your sash window without having to take it off completely. After you've used it, you can pull off the two sashes by placing a piece wood in the bottom corner of the window where they meet.

Draughts

Draughts can be a major issue for old sash windows, especially in the winter months. They are usually caused by rotten wood, cracked putty or worn sash cords. This can allow cold air to enter the window, making it more difficult to heat your home. You can stop drafts by filling in gaps with expanding foam or by utilizing draught-proofing strips that are found in many hardware stores. These can be efficient, but they'll have to be replaced periodically as the foam expands and gets worn away with time.

A more permanent option is Gapseal which is a rubbery spongy seal that you can cut to the desired size and then insert into the gaps between your sash window frame. It can be used by itself or in conjunction with adhesive strips at the top and bottom. This option is costly and you'll need to apply it again over the life of your window. But, it's a long-term fix and is simple to remove.

Another popular DIY draught proofing solution is to use cling film scrunched up and placed into the gaps around your window. This is a great draught stopper, but the drawback is that it could block sash travel completely and pose risky for fire. The sash has to be removed in order to reopen the window and the clingfilm must be to be reapplied each time the sash is closed.

As part of a complete renovation it is possible to have your sash window professionally draught-proofed. This could include the replacement of sash cords and parting beads, staff beads, lubrication for the pulley wheels and rebalancing the weights, and painting or staining the frames and sashes. This can help to restore the function of the sash, and increase its energy efficiency, window repairs in addition to addressing any minor timber imperfections. It's less disruptive than removing the windows and can help reduce drafts, enhance the thermal performance, and drastically reduce costs.

Decay

If your windows are sash and have suffered decay or damage, the good news is they are not necessarily beyond repair. The frames of these windows are typically made of high-quality timber. If you can restore them properly they can be repaired to provide high performance for a long time. The key is regularly checking the frames and making sure that the wood is well ventilated to prevent the accumulation of moisture which can lead to wood decay.

The majority of issues with sash windows are easily visible, but others are more difficult to identify. Particularly, wood decay is a very difficult problem to fix because fungus eats away at the wood. It is possible to repair damaged sections of timber however the best way to stop further decay is to ensure the timber is kept dry.

First, clean any paint from the hardware. The bottom rail and meeting rail could require removal from the frame (depending on the location of your sash). The next step is to take off the "pocket covers" which are bits of wood on the side of the frame that are low down that provide access to the weights (the parting beads run through the middle of them). These are often put in place by nails and then covered with paint, so you'll likely require a knife to get them loose. Once the pockets are gone, you can begin to remove any wood that is rotting, and apply a good quality, water-resistant wood filler. Once the filler has dried the primer must be applied to protect against further decay.

It is an excellent idea to examine the sash's weights inside the window too, to ensure that they are in balance and not swaying one side more than the other. The sash could slide off the track if they aren't balanced. This could cause the frame to break or be damaged. The sash weights can be replaced with new ones or a new balancing mechanism can be fitted that will stop the sashes from swinging to the wrong side of the frame.

Poor Security

Sash windows are prone to wear and damage due to weather conditions over time. This can lead to the decay of the timber, which requires replacement. Wood decay can be spotted by water marks beneath the upvc window repairs near me, or by the frame becoming soft to touch. It is essential to speak with a professional to assess the situation and determine if any sash window repairs are necessary.

Over time the rails at the bottom can also be damaged. This is evident by the presence of water marks on the sill or the window becoming soft to touch. A professional will be required to evaluate the situation and recommend any needed resealing of sash windows components or replacement.

Double and triple glazed Sash windows do a fantastic job at keeping noise out of the home, so it can be a cause for concern when they start to let it in. If this happens, the structural integrity may be at stake and the sash window will need to be replaced.

A common sash window repair problem is when the sash gets stuck in the frame. This could be due to the sash cord being snapped or it could be the result of an issue with the sash the ratchets. If the issue is with the sash's ratchets, a little gentle persuasion is often the best solution.

Removal of the sash from the frame and cleaning the tracks of dirt or dust will often assist in resolving this problem. After cleaning the tracks, take off any security fittings, and then remove the chains or sash cords. A draught seal can then be applied around the staff bead to reduce draughts and improve the appearance of the paint finish. Decorators caulk can be used to fill in the gap between the sash's sash box and the sash. This will enhance the operation of the sash and also reduce the risk of draughts.