• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and Window repair aluminium, they are not susceptible to rust or rot.

It is important to clean and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows it is relatively easy to replace them, and the new window will usually fit inside the frame that was previously installed easily. However If you have double pane windows that are held in place by internal beading, it will be more difficult to take out the panes that are in place and replace them with new ones. In this case, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor which could cause them to be trampled under.

It's a great idea seal the gap after the glass has been removed. This will stop water and drafts from entering your property until a professional arrives to repair the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap between the window and the door is substantial, you may need to consider an alarm system that has a window. This will provide the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. However, with time, they may be afflicted by a variety of issues, including sagging. A sagging window can cause problems with light, draughts or even security. It's important to take action immediately if you realize that your uPVC windows are sagging.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to unblock the windows to get at the frame. With the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you have moved your hinges. If you're satisfied with the size of the Window Repair, tighten the screws to keep them in place.

If you are unable to reposition the hinges, you might require replacing the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows are watertight and secure from draughts.

UPVC handles can also become loose. Most often this is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. The first step is to close the window and perform an initial test to ensure that it fits. The joint at the corners of the sash must align with the joint on the casing. If it isn't you can use a screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it's important to take action. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature in your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or not present.

It is a fairly easy fix and should be undertaken by any DIY expert. Depending on the severity of the problem the old caulking may require removal before a new layer can be applied. It is essential to keep in mind that when it is about uPVC window repairs you should not be tempted to apply too much caulk and then make the area harder to clean and could reduce the efficiency of your energy.

Check that any drainage holes do not have debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you may need to think about replacing the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread across the home.

It is also important to remember that if the leakage is coming from between the glass in your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be repaired by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open in a breeze it could be hinges that are at the fault. Any competent DIYer can replace the hinges in a matter of minutes.

Like any mechanical component hinges are prone to wear out over time. It is essentially a very simple process but it can be simpler if you have someone to help you hold the frame in place.

Verify that the uPVC hinges open and close in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a certain way or by improper installation in the factory. It is usually possible to fix the issue by sending us a photograph on our website. We will be more than happy to give you suggestions.

Regular lubrication of the hinges is essential. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to operate and close more easily. It can also stop corrosion and reduce the possibility of sticking. This is recommended to be done at least once a year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. Firstly the hinges, again due to wear and tear may become displaced, which can cause an opening to appear where the sash joins the frame. If they are damaged beyond repair, it might be necessary to have them realigned. Secondly the interlock, this is located on the hinge of the window and can be misaligned. Again, it may be possible to give them a clean but in some instances it could be necessary to have them replaced.

The next most common reason for draughts are the window seals, these can become worn down or damaged over time and allow air to escape through the gaps. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Replace the windows made of Upvc with low-emissivity glasses. This will help control indoor temperatures, and reduce the possibility of draughts.

Another, and most effective ways to cut down on draughts is by using an draught excluder. These are typically made of fabric filled with some type of filler. They can be placed on the windowsill on top. They will keep your home warm by blocking cold air.

With a little regular maintenance and repairs your windows made of upvc will provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows will eventually get worn out and it may be more cost-effective to simply replace them instead of fixing them. So, if you are experiencing issues with your Upvc windows, it is recommended to seek assistance from a professional as soon as you can.