• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Replacement Upvc Window Handles

The majority of replacement window handles made of upvc include everything you require but if the original handle had pins or screws that were holding it, they must be removed. Take off the "snap-in" cover at the base of your handle.

The next step is to identify the type of window and lock your new handle - this is crucial!

Espag

Espag handles are a set of multipoint locks suitable for casement windows such as uPVC or wooden double glazed replacement windows glazing. The handle is fitted with a 7mm square shaft that is fitted into an internal gearbox that is mounted on the uPVC window. When the handle is turned, it triggers a series of locks around the window's perimeter. Espag handles are also referred to as shootbolt handles. They provide more security than the standard single point lock that is found on older frames.

They are available in a range of different styles, such as inline and cranked designs that can be used either left or right-hand operation. There are also ergonomic handles that improve the appearance and feel of your window as well as the handle.

You'll need to determine the size of the spindle from the base of your uPVC handle if you want to purchase the correct replacement window seals. This measurement is referred to as step height. It will assist you in finding the ideal uPVC handle for your home.

You may need to remove any screw covers which protect the screws that hold the handle in place, and if that's the case, use a screwdriver to remove these or pliers to remove the pins holding the handle. Once this is done, you will need to remove the handle from the frame by taking off the screws or pins that secure the spindle, and then pulling away from the window.

After removing the handle you can open the locking mechanism in the frame of the windows and take out the cockspur block connected to the handle. This will allow the window to be opened. The new uPVC window handles that you've purchased will now be able to fit on the wedge block of the cockspur and then into the spindle of the handle, allowing the window to open again. Ideally, you should replace the wedge block cockspur with a new one when changing your uPVC handle to ensure it is properly secured.

Cockspur

Cockspur handles are usually found on older uPVC and aluminium windows. The handle is turned and then closes onto a plastic wedge shaped receiver catch (not to be confused with timber window latches which are also handled in this section). The handles are available in lockable and nonlockable models. They are available in a variety of nose sizes that can be adapted to the existing frame.

The handle is locked by small triangle-shaped spur (spur) that is attached to the frame. These are generally one way handles, however a deadlock lock cylinder that locks can be added for extra security.

The replacement handles for cockspurs are simple to install. All you require is the correct backset as well as a new set (supplied). The backset is the distance from the baseplate of the window to the underside of the handle's nose. Aluminium window frames are generally 9mm wide, whereas UPVC is 21mm wide. There are also many variations, so it's important to measure before buying the handle.

This kind of window handle can be substituted by simply unscrewing the existing handle and then removing the spindle, or in some cases, the entire handle. The replacement handle can then be screwed in place using two pozidriv screws. The pozidriv screw comes in a brass or a zinc finish to match the hardware you already have. There is also an option for a self-locking pozidriv screw.

This is a simple to install replacement of window glass for the cockspur handle that is ideal for repairing or replacing old uPVC windows. They feature an universal design that makes them suitable for a variety of profiles and backsets. Each handle is supplied with 3 packers of different thickness, these are neatly placed on the underside of the handle nose and can be used in a variety of ways to create backsets of 9-13mm, 17mm and 21mm. The handles are available in left and right-handed models, as well as lockable and nonlockable versions. They also come in a variety nose heights.

Tilt and Turn

Tilt and turn windows are a premium European window style that has been in use for a long time in Europe, but is only beginning to gain traction stateside. The windows combine the functionality of 3 window styles - tilt, in-swing and pivot. They are great for older homes because they are more breathable than standard windows.

When tilt and turn windows are closed, they lock like any other fixed window. However, by turning the handle 90° or 180@ (depending on the kind of tilt and turn window) the sash can be opened upwards and the window will tilt into allowing air to circulate through the opening at the top of the frame. This is an excellent way to allow air circulation without having to open the large windows that could be dangerous.

If the handle is turned 90or 180 degrees the sash will be fully opened, much like a door. This allows for full air exchange, which is particularly useful in rooms that are chilly or homes where smoke or other odors are likely to accumulate. It also makes cleaning the exterior of the glass replacement windows much more easy since it can be done from inside the house which usually requires ladders that are a bit shaky.

Tilt-and-turn windows are also very secure. They are extremely difficult to open when locked in closed position. They also have double seals which stop rainwater from entering your home while it is in the tilted position, or in swing. This is a beneficial feature for older homes where burglars are more likely to target windows that are opened using the side hinges.

Spade

There are several different types of handles that can be installed on upvc double-glazed windows. There are two kinds of handles: Cockspur and Espag. Other choices include tilt and turn handles as well as blade or spade handles, monkey tail handles, and various other kinds. The type of handle you choose will depend upon your preferences and the type of windows you have.

You must know how your current handle is attached to the frame to select the correct replacement Upvc handle. This is known as handing and is a vital piece of information to know when buying online. Some handle designs do not fit all windows. Certain cockspur handles, as an example, are angled while others are straight, and can turn either left or right. You'll also need the spindle size that is the distance between the base of handle and the head of handle.

Another crucial aspect of selecting the right handle is knowing whether your windows need a restrictor or not. These are usually used in high-rise flats or commercial buildings, but they're not required for the majority of homes. It is also important to be aware of the step height which is the distance between the screw plate and the nose of handle.

Spade comes from Old English spadu, spaedu or spada and has been translated into a variety of languages including German spaten and Low German spathen. In the 1920s during the Harlem Renaissance in New York City, spade began to be used as a sexist term for black people. The word has since risen to prominence in pop culture and is a widely recognized symbol of African American heritage and pride.

When replacing a Cadenza style handle, it's essential that you choose the right size. The handles are available in both straight and angled designs that differ by only a few millimetres. The handle head is available in a variety shapes such as a T or D shape. It can also be left with handles.