• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Repair a Bad Patio Door Lock

A secure patio door is a vital element of home security. If it is difficult to lock, it can be a hassle.

A locked that isn't working properly could be caused by misalignment or simply wear and tear. It is possible to fix the function of the lock by adjusting or lubricating it. If these troubleshooting techniques don't work you can replace both the mortise and handle.

Clean and Lubricate

Over time, dirt, dust and grime can make it difficult to open and close doors. Regular cleaning and lubrication can help to prevent your security device from becoming stiff or stuck. This will help you save money on repair bills and extend the lifespan of your door.

In the beginning, you'll have to clean the lock the cylinder. Use WD-40 or another penetrating spray to do this. Spray a small amount of it into the keyhole, then work the key through and out to spread the oil. Do not use household oil or other solvents which could damage your locks. Spray a small amount on the key.

After cleaning your lock cylinder, it's time to grease. You can use dry lubricants such as graphite powder or a silicone spray. Graphite powder is long-lasting and doesn't swell up like liquid lubricants do, which is why it's a great option for lubricating sticky locks. Silicone sprays are able to endure temperatures of minus 0 degrees and are resistant to water. However, they may require multiple coats to be efficient.

You can also use sprays for de-icing specially designed for cold weather and will remove frost and ice from the lock mechanism. This will allow you to unlock your lock and then lock it more easily.

How often you need to lubricate your locks will rely on the environment. The location of your door can affect its performance. A location that is near the ocean can expose it to salty air which can cause corrosion. It is recommended to regularly lubricate your locks at least two times a year or more often if your area has harsh weather conditions. Lubricating your patio door locks will save money on repairs, and ensure that it will continue to work properly for a long time.

Reposition the Lock Cylinder

If your patio door lock isn't operating properly, it could be that one or more of the components are damaged or misaligned. Regular inspections and timely repairs of a damaged lock on your patio door will prevent further damage and ensure the security of your doors. You can fix doors that are locked or locked by tightening loose screws, adjusting the lock mechanism, or replacing the lock cylinder.

Begin by looking at the exterior and the inside of the lock to determine if there are any signs of damage or misalignment. The patio door locks may expand or contract depending on the weather, and they might even shift with time. This slight shift can cause the locking mechanism to stop aligning properly and can cause issues when opening or closing the door.

Then, look over the lock cylinder for obstructions within the keyway hole. If the lock is corroded or blocked, the cylinder is difficult to open and can eventually cause damage to the pins of the lock, cams or latch springs. If the cylinder is difficult to insert, you may be able to remove any obstruction using a pair of tweezers, or a picklock. If the problem persists you may need to take out the cylinder to find the root of the issue.

If the lock cylinder hasn't been screwed into the lock body then you can loosen it by unscrewing a flat screw inside the faceplate of the cylinder. By loosening this screw, it will allow you to move the cylinder around and could help restore proper alignment.

Look over the cylinder for a little tab that moves up and down using the key, typically towards the end. This small clip, sometimes known as a "release Tab" is what stops the cylinder from sliding glass Patio Doors repair into the lock body all the way. A standard key can slide this tab back to release the cylinder and allow it to be removed and put back in.

If the lock cylinder of yours is stuck, you might be able to restore the proper alignment by rotating it until the latch bolt engages with the strike plate and the handle or knob can be pushed into and pulled out. Reassemble the lock after you have restored the proper alignment. Check it out for its functionality. If the lock on your patio door isn't working properly it's likely that an additional component such as the latch spring or latch needs to be replaced.

Lock the Screws

Locks for patio doors can be damaged by regular use, extremes of temperature dust, dirt and. These delicate components can be damaged if they are not properly maintained, leading to your door to stop locking properly. Fortunately, most lock issues can be fixed easily with just a few simple maintenance steps.

It is recommended to first clean the lock mechanism. Use a damp cloth to clean any dust or dirt that might be found. Then dry the parts thoroughly. After cleaning some silicone-based lubricant will help keep the moving parts functioning smoothly and efficiently. Avoid lubricants that contain oil bases, however, as these can draw dust and dirt which can cause further problems.

Then, if your patio door is equipped with a foot lock that is secure ensure that the lock is aligned with the strike plate. In most instances, this will require adjustment of the screws that hold the foot lock to the frame of the patio door. To adjust the foot lock simply loosen the screw using a Robertson screwdriver, and then gently push it up or down. Once the adjustment has been completed you can tighten the screw.

When it comes time to repair the handle on a patio door the most frequent issue is misalignment between the strike plate and the latch. This could be due to normal wear and tear, or it could simply be due to the fact that the latch is positioned higher or lower than it should be.

Then, take out the old handle and locate the bolts or screws that are holding it in the first place. Keep track of the screws or bolts, since you'll need them to attach the new handle. Next, remove the old spindle, and then slide the new one into the door on the side of the door, making sure that it is in alignment with the holes in the interior and exterior handles. Once the new spindle has been installed put back the handles for both exterior and interior and ensure that they are aligned with the screws or bolts that hold them in place.

Close and lock the patio door after you have made any necessary adjustments. If the door is correctly aligned, it should be able to open and shut smoothly without needing any additional force. If you're having difficulty, you might need to move the latch or strike plate or the lock cylinder may be damaged and need to be replaced.

Replace the latch

If your patio door locks still not working, it might be time to replace the lock. The replacement of a lock is a relatively simple home improvement task that many homeowners can do themselves. Start by sliding patio door lock repair the sliding patio door repair service near me doors completely out and removing the existing lock from the inside of the door. Be sure to study the way in which the current lock is screwed to the door and the door jamb so that you can get a sense for what type of lock you'll need to purchase.

Before installing the new latch, loosen screws that hold the strike plate. This is the part of the lock that is mounted on the edges of the frame of the door. Adjust it either horizontally or in a vertical direction to align it with the holes for the latch. After you've repositioned your strike plate, secure it in place and tighten the screws.

After all components have been repositioned or changed after which you can assemble and secure your patio door according to the instructions of the manufacturer. After you've completed the process testing the latch. Make sure it fits correctly and is secured when the door is closed. If it does, then your patio door handle repair near me door lock has been put in place correctly and is ready to provide the security and privacy you've come to expect from.

Like other parts of your home your patio sliding door repair near me doors also need to be properly aligned in order for them to function efficiently. Over time, temperatures cold, dirt and debris can cause hinges and door frame to shift. The wrongly aligned hinges, door frames and locking mechanisms are similar to trying to put a key in the wrong keyhole. It's not working. By following these simple steps, you can solve a problem that might have been thought to be impossible to fix. Do yourself a big pat on the back for taking on the job and reclaiming your patio door's closed position! We bet that you won't experience any problems opening or closing your patio door again. Good luck! We are here to assist if you need any assistance or have any questions.