• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Check the windows sashes regularly for any damage, mildew and mold. You can save future repair costs by catching problems early, before they get out of hand.

The sash is the interior framing that can be moved vertically upwards or downwards in windows that open. This article will teach you how to carry out a few simple repairs to sash.

Weather Stripping

Wood upvc window repair sashes provide the classic look to your home. If properly maintained, they can last for many years. They can, however, be damaged or degraded over time, due to exposure and normal wear. However, sash repair experts can bring your windows back to their original condition and keep them looking great for longer than replacement windows.

The first step for repair sash window damage is to fix weather stripping, which is found on both the sash as well as the frame. If it's worn or loose, out, it can lead to drafts and other issues. Start by identifying the window's brand and the glass manufacturer's date (etched on the glass's corners or on the aluminum spacers between panes). Then, take the sash off and mark its width and height, so you can find the appropriate weather stripping replacement to match.

Then, take it off and place it on a work surface to allow access to all four sides. If the sash is double-hung, take out the weights with their ropes that should fall into the pocket inside the jamb lining. Once you've removed the sash and the weights, use a utility knife to cut off the weather stripping that was formerly in place at the corners, then take it off by hand or using a putty knife.

After the sash has been cleared and clean, you can put in the parting stops. These are long pieces of wood that are used to separate the two sashes. Pam likes to replace them with standard 1/2-inch by 3/4-inch window repair near me trim from the lumberyard, however you could also use a piece of scrap wood.

After removing the parting stops and trimming them to your desired length then apply a thin layer of glazing compound to the bottom of the sash. Smooth the compound using a putty tool, and let it dry at least one day. When the putty is fully dried, you can apply a topcoat of acrylic. This coating will protect the putty and give your sash a new look.

Sash Hardware

The hardware that holds window sashes is susceptible to wear and tear due to age and use, and the result can be a door or window that can't be opened or closed easily. The good news is that repairing and replacing this hardware is generally quite simple and inexpensive. If you are having trouble opening a sash spray some lubricant into the jamb channel. Then, you can slide the sash up and open to see if it resolves the problem. If the issue persists, it is most likely to be due to the sash's balance. You'll need to take off the window sash in order to access the hardware.

Ideally, window sashes must move open and shut without effort, but this is an issue when the weights wear out or if the sash's meeting rail isn't properly glazed. This issue could be caused by a variety of factors, including insufficient maintenance or an incorrect weight rating for a particular window sash.

If the hinge arms of a window are starting to lose their elasticity, this could cause the sash's to drag and eventually land on the frame in the corner that's opposite the hinge arm (Photo 1). To correct the issue, make sure that the sash is aligned in the frame opening and then remove it. If the sash is screwed to the hinge arm, you'll need to unscrew the hinge arm and replace it (Photo 2). Install the new sash next (Photo 3).

Due to sagging hinges, and a general lack of energy efficiency, old windows especially in older homes, can be difficult to open and close. In most instances, a few minor repairs can transform these windows into smooth operators for the first time and save the homeowner money on energy costs.

It is essential to have the tools you require before you start. Begin by marking the position of the hinge channel on the frame with a pencil (Photo 1). This will allow you to get the channel back into place correctly when you're finished. Remove the sash, and then remove the hardware, including the parting beads (Photo 2) and the cords or chains that secure it. The nozzle shield of the heat gun and a medium setting can soften any hardened glue. Take off the old sash and store it in an bag that is labeled.

Sash Weights

Sash weights are able to be replaced to improve the operation of your window sash, and also reduce the cost of energy. Sash weights are heavy, lead or iron cylinders enclosed inside a hidden compartment and connected to the movable the sash with a rope. These weights act as counterbalances and allow you to open and shut the window without having to use mechanical or electrical devices. The sash weights are often ignored or discarded by homeowners and then turned into scrap when they fail; therefore you may have to search for replacements.

A sash weight that has fallen out of the cavity is difficult to recover It is therefore important to find a new one that fits properly. You will also require a new piece of string, a length of the sash cord, as well as some sash pulleys to tie the new sash weights the sash cord.

Older wood windows are joined by mortise and tenon joints. Hammers and pins can be used to cut off the wood pegs holding the parts together. The majority of these pegs are large on one side, but smaller on the other. It is important to remove first the smaller diameter sides. Later sashes utilized glue instead of pins. They can be cut near By using a knife and mallets.

Once the sash has been released, you can remove the sash stops and access the weight pockets. Usually, this is done through an opening at the bottom of each jamb. This hole is covered by an access panel of wood that can be ripped off to let you view the inside of the frame.

Once the sash is stopped and the access panel is removed, you can take off the old weight and replace it. Be sure to weigh the sash before you do this, since the old weights could be different sizes than what is needed. Once the new weight is installed, tie a string to it and thread it through the pulley for the sash. Then attach the string to the frame, but only leave a few inches of string hanging from the head for future adjustment.

Sash Cords

In the majority of old double-hung windows the chain or cord is attached to the weights. This keeps the sashes in the jamb balanced. Over time, these chains can get damaged and make it impossible to raise the windows. A new sash cord will give you the ability to move the sash up and down and keep it in place when opened.

To replace sash cords the first step is to remove the access panels from the jambs. They are typically fixed or screwed in and will require to be removed or repositioned. You might be able to use a hammer and chisel for removing them however, it is always best to lay down dust sheets prior to commencing any work.

After the access panel has been removed, you can begin working on the sash. Use a flat bar or chisel, to pry the narrow partsing beads out of their grooves. It is essential to take your time as they're often stuck or nailed to the floor. If the sash is still in place, pull the mortise-and tenon joints with a screwdriver or near By hammer and then take out each wood peg. You should be able to move the sash around freely, although it might require oil if it feels stiff.

Measure the length of sash chain/sash cord needed to reach the sash slot on the bottom of the pulley on the top of the jamb. Cut the chain or cord and secure it as in Step 6 above. You can either use a hammer and screws or nails, however nails are less likely to cause damage.

It's best to leave the original weights if you've purchased a kit to replace the old counterbalance. It's not too expensive to purchase these from salvage shops for architectural purposes and they will be easy to install once you've got the sash unlocked. Depending on the size of your window, two or three sash weights might be required to keep the sash in an open position.