• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Locked Keys in Car? Here's How to Open Your Car Without Damage

If you've locked your keys in your car, don't panic. You can try a variety of ways before calling for locksmith or roadside assistance.

You can, for example using a shoelace that has an elastic slip knot to raise the post lock. Or you can untwist a wire coathanger and shape it into a hook. You can also use a door wedge or inflatable wedge.

Pump Wedge

If you've been trapped in a car Locked keys in car how to open (http://tst.ezmir.co.kr/bbs/board.php?Bo_Table=qna&wr_id=58664) up and none of the DIY methods like shoestrings, wire hangers or wedges work for you, it's time to contact an expert. A locksmith or repo service provider could have special lockout equipment that can allow you to unlock your vehicle without causing damage.

If they do, make sure you use them correctly. Most importantly, know where to place the wedge tool. Many people make the mistake of placing the wedge on the top corner of the door, which is where it is most prone to damage. This is a bad idea as you're more likely to damage the weather stripping or the wires within the door. Place the wedge where you can see the largest gap and where the maximum leverage is.

The Pump Wedge is an inflatable wedge constructed of durable vinyl that will not scratch the surface. It slides between the vehicle door and the door frame. It is filled with air to create a space that allows you to insert other tools such as a long-reach tool rod for opening your car. It comes with a hook at one end that you could shape in order to grab the latch on the door handle.

This can be done using a pair wooden door stops. They can be placed at the back of the car door to pry the space wide enough to accommodate rods. You can also try the slim jim which is a thin metal strip that can be bent into a hook that can be used to latch on the lock and pull it up. This method is not for the faint of heart as you must be cautious not to damage the weather stripping that is on your door.

Another alternative is to use a shoelace however this is only suitable for older cars that don't have a push button unlocking mechanism. You can tie a slip knot in the middle of the lace, and then move it up and down the door's seam until you locate the latch. Then, move the lace until it catches the lock, tighten the slip knot, and pull it upwards. This method can be more difficult than the other, and it may scratch the paint or damage the door trim if you're not vigilant.

Inflatable Wedge

If you have a wedge-shaped inflatable car door opener, you will be able to easily unlock your car without the necessity of prying or slim jim tools. These wedges for car doors can be inserted between the window and the frame of the vehicle, and when they're inflated they create a space large enough to insert tools with a long reach, such as a slim jim or a button grabber. This method is less dangerous than using tools for prying and is a good option if you do not have a screwdriver.

A coat hanger that is wired into a hook is a different option to unlock the car without damaging its exterior or interior. This can be used to grab the lock and may work better than the flat screwdriver since it is less likely cause damage to the paint of the car. However, you should still inspect all the doors to make sure there is no other method to gain access.

You could also try a plastic bag that has been twisted into a noose-like or v-shaped shape, but you'll need my car unlocked to be careful not to tear it because this could make the situation even more complicated. This technique is especially useful if you are not able to locate the lock button. It might not be as reliable as using a wedge or a metal coat hanger but it could be useful when you're in an uneasy situation.

The best advice we can give you on being locked out my car out of your vehicle is to stay calm and prioritize safety. Luckily, there are several solutions to this kind of issue. If you study this article, you can be ready for any scenario that may come your way. You can unlock your car by following our directions. This will help prevent unnecessary damage and stress. If you are able, bring your keys with you when you leave your vehicle.

Shoelace

Being locked out of your car is one of those "oh what a mess" moments that can make your day miserable. It's a good idea to have a few tools that you can use to open your car without breaking any windows. Some of these items are easily accessible and will help you save money on locksmiths, or the time it takes for roadside assistance.

A shoelace or twine could be used to unlock a vehicle. It is easy to use and can be used on numerous cars. This method only works for cars with post locks. They are stacked vertically on the window sill and are easily accessible from the outside of the car. To accomplish the task make use of a shoelace create a slip knot, then move it into the crack between the door and window frame. Once the slip knot has been put in place, pull the two ends of the string up to lasso it.

This method is more effective when applied to older vehicles and may not work with newer models that have a hook inside lock. A screwdriver, if it's available could help key cutting near me open now the door in a more aggressive way. Another option is to grab an object from a nearby object such as a doorframe or piece of wood, and then stick it into the window frame to create an opening for the rod you'll use to push the interior lock button.

Although the above strategies are generally safe for the majority of drivers, it's best to call for assistance if possible. This will stop any further damage to the vehicle and it can also lower the likelihood of an accident that is caused by the stress of the situation. If you do not have a phone with a mobile number or are unable to reach a helpline It is crucial to always let trusted family members and acquaintances know where your vehicle is parked. A spare set of keys must be kept in a safe spot on your vehicle.

Wire Hanger

There is no doubt that locking your keys locked in vehicle in your car can be a stressful situation. The trick is to remain calm and consider all your options logically. This will prevent you from aggravating the situation which could happen if you panic.

One of the most effective things you can do is use a modified wire coat hanger to get back into your vehicle. You'll need to uncoil the coat hanger wire to create a straight edge with a hook that you can use to move the lock rod. When you are able to reach the rod, you will be able to pull it up to open the door.

Another option to consider is using a rod or even an element of metal from the body of your car. You must make sure that you don't harm the vehicle during this process. It is best to avoid having to disassemble the car. This method will work better on older cars than on newer models. However it is possible to use it on models with distinctive door handles on the outside.

You can accomplish similar things using a shoestring tied in the slip knot. It can also be used on a post lock, however, it's somewhat more difficult to operate since you will be relying on the tension from the string to grasp the lock. The best method for doing this is to thread the shoestring through a small hole that you can create in the weatherstripping of your vehicle's door. Once the string has been threaded you can pull it tightly to create a loop that will snap around the lock and allow you to pull it out. If you're lucky you will find the lock in the right place.