• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

Depending on how new your Subaru is, you may need to have your key fob programmed by a dealer or an automotive locksmith. This is accomplished by connecting a computer machine to your vehicle.

To program your Subaru, unlock the driver's door by pressing the door button. Then close it. You will hear a sound on the instrument panel and the dome lights will light up.

Step 1: Locate the circuit board on your transmitter

There are a few different ways to program your key fob. First, you should know which kind of key fob you have. You can determine this by studying the shape of the key fob, or by listening to your car's sound.

Once you have this information, you can start the process of programming your key fob at home. You'll require an aluminum flathead and a key to accomplish this. You can open the key fob by twisting it. Push the metal key into the case. Then let go of the battery by pressing the tabs holding it in place. Replace the battery and then put the case back together.

Step 2: Unscrew the Key Fob Case

It is recommended to replace the batteries in key fobs in case they aren't working. However, there are situations where the buttons on the key fob may be broken. If you notice that the button's metal contacts have been loosened, you can try applying solder back to them to get them working again.

Before you begin the process, ensure that your car's doors are shut and the ignition is turned off. You can do this by closing the driver's door and pressing the door button ten times in quick intervals. Then, you should hear the instrument panel chime, and the dome light will flash. This indicates that you are prepared to move forward.

Step 3: Insert the fob for the key into the ignition

Many articles on the internet will teach you how to program your brand new or replacement Subaru key lost subaru keys keyfob at home. But, the majority of them do not provide very specific instructions. A professional locksmith or auto dealer in Fort Bliss is the best option for reprogramming an electronic car key.

Sit in the driver's seat, with all doors closed and the engine turned off. Use the door button to open all doors. Open and close the driver’s door two times more. Remove and insert the ignition key (don't turn it) 10 times over 40 seconds. The system should chirp to confirm that the settings have been altered.

Step 4: Turn on the ignition

Before you begin this process of key fob programming, it is crucial to know that this procedure only works if you own one working key already. If you don't you can find an auto-locksmith or dealer who will be required to program a key for your subaru key replacement cost Fort Bliss.

After your key has been programmed you should be able start your car in less than five seconds. Start by closing all doors and shutting off the engine. Sit in the driver's chair and unlock all doors by pressing the button on the door. Place the key in the ignition and turn it to its first position. The electrical systems will be activated however, the engine remains off. Repeat this process ten times.

Step 5 Step 5: Unlock Driver's Door

Subaru has a broad selection of high-end cars with key fobs, which can lock and unlock doors and even start the car and defrost the windows. However, there are times when these devices aren't working as they should.

Find a locksmith or dealer to resolve the issue. This will resolve the issue and ensure your vehicle is safe.

It is necessary to first open and close the door on the driver's side. Place the key in ignition and turn it until it is in position 1. Then, turn it back to the off position. Perform this as fast as you can ten times. After tenth attempt, you should hear a chime.

Step 6 Step 6: Press the Lock/Unlock key on the driver's Door

If you need to replace the battery on the Subaru key fob, the process is straightforward. Unlock the exterior fob case. Then you can use a flathead screwdriver to pry into the case's interior and take out the old battery.

After removing the battery then replace it with a new one. Close the case. Assume a seat in the driver's chair and open all doors using the door-button control. Place the key in ignition and turn it so that the electric system is on, however the engine is off. Repeat this 10 times in a line until you hear a chime from the instrument panel. This will put the system into programming mode.

Step 7 Step 7: Press the Lock/Unlock Button on the Passenger's Door

The annoying chirp which can be heard when unlocking or locking a Subaru Key Fob from the outside of the vehicle can be very distracting for some owners. In some cases the chirp can be removed by closing and opening all doors, and then a double-click of the lock button on the key fob.

Switch the ignition off and close all doors, as well as the fuel-filler lid. For 10 seconds you need to press and hold the lock button on the key fob. After that the instrument panel will emit an audible chime. The chime signals that the fuel-filler lid and door lid are locked. It is possible to alter the setting so that the doors are locked automatically without pressing a switch.

Step 8 Step 8: Enter the 8 Digit Transmitter Number

Remember the first 8 digits in your mind. Now, climb into the driver's seat, close the doors and turn the key into the first position. After ten turns, your instrument panel will sound once.

The circuit board for the transmitter is inside the key fob case. There are usually one or two sets of numbers (8-digits) on the circuit board. Take note of the first number sequence and follow the steps in this guide to register the code on your vehicle's system. For older models, this procedure may require a visit to the dealer.