• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they don't rust or rot.

It is essential to clean and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows it is fairly easy to replace windows, and the new one will generally fit within the old frame very easily. If you have double-paned windows which are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation, you will need to find some plastic spacers that will assist the new pane to fit correctly into the frame of the window.

If you plan to try to remove the window panes yourself, it is essential to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth prior to when you start working on the glass so that any fragments of glass fall on the fabric rather than on the floor where they can be trampled on and cause further damage.

After the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to block water and drafts from getting into the property until a professional is able to come out and repair the window. This also serves as a barrier to prevent any intruders from making their way into your home. If the gap between the window and the door is substantial, you may need to consider an alarm system that includes an opening. This will give you the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. However, with time, they can suffer from a variety of problems including sagging. A window that is sagging can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from worsening.

Repositioning the hinges can aid in fixing a window which is sagging. You'll first need to open the windows so you can reach the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and test it for fit. If you're happy with the fit, tighten the screws to ensure that they stay in position.

If you cannot reposition the hinges, you could have to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to loosen. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your upvc Window repair windows remain watertight and secure from draughts.

uPVC handles may also become loose. Most often, this is caused by screws that have become loose over time. However, it could occur because the handle mechanism has worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to close your window and do an experiment to ensure that it fits. The corner joints of the sash must align with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and return the mechanism to its original position.

3. Water Leaks

If you wake up to wet floors and damp walls every time it rains it's important to take action. Windows that leak water do not only lead to the destruction of your home's structure but also undermine your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be done by any DIYer who has the ability. Depending on how severe the problem is, the old caulking may have to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and decrease the efficiency of your energy usage.

Verify that the drainage holes do not have debris in them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious cases you might need to consider replacing the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is related to the seal, not the frame. A upvc window repairs near me specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with ease It could be hinges that are at the fault. These are easily repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Like any mechanical component, hinges can be damaged over time. It's easy to replace a hinge on a window repair, but it's simpler if you have someone to help you hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. You can do this by checking for the arrows on each hinge, this shows which way the window should open.

The issue could be caused due to opening the window in the wrong way or by a poor installation at the factory. This can often be resolved by sending us a photograph through our website and we will be happy to give you advice.

Regular lubrication of the hinges is essential. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. This must be done at a minimum every year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by different things. The hinges may also become unbalanced due to wear, causing gaps where the sash and frame meet. If they are damaged beyond repair, it may be necessary to have them realigned. The interlock may also become disaligned. It is located on the hinge's side, and may need to be cleaned. In some instances it might be necessary to replace these.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping will help to prevent draughts. Replace the windows made of Upvc with low-emissivity glass. This will help to regulate indoor temperatures and decrease the risk of draughts.

One of the most effective methods to reduce draughts is by using an draught excluder. These are typically fabric tubes which are filled with a sort of filler and can be placed on the windowsill on top. These will help to keep cold air out and keep your home warm and cosy!

With a little maintenance and repair your windows made of upvc will provide a great level of security and insulation for your home. It is important to remember that all windows will eventually get worn out and it is more cost-effective to simply replace them than to repair them. If you are experiencing problems with your upvc windows, it is always recommended to seek help from a professional as soon as possible.