• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is important to make sure that your windows are in good working order.

For single pane windows it is relatively easy to replace them, and the replacement is usually able to fit into the old frame very easily. However, if windows with double panes are secured by internal beading, it'll be more difficult to get rid of the existing panes and install new ones. In this case, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor which could cause them to be trampled under.

It's a great idea tape the gap once the glass has been removed. This will stop drafts and water from getting into your home until a professional is able to repair the window. This also serves as a barrier to prevent any criminals from getting into your home. If the gap is particularly large, you may think about the security door with an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. However, with time, they can suffer from a variety of issues, including sagging. A sagging window in uPVC could cause issues with light, draughts and even security. It is crucial to act immediately if you discover that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window that is sagging. First, you'll need to open the windows to reach the frame. With an screwdriver, unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you're happy with the fit, you can tighten the screws until they remain in position.

If you can't reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is crucial to replace your seal as quickly as you can in order to ensure that your upvc window repair window watertight and draughtproof.

uPVC handles can also become loose. This is typically caused by screws that have become undone over time, but it could be due to the handle mechanism wears out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need close the window and then perform an initial test fit. The joint at the corners of the sash should align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original position.

3. Water Leaks

It is crucial to take action if awake each day to find a smoky wall and wet floors. The leaks of water from windows do not only lead to the degrading of the structure of your home but also hinder your efforts to control the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue is, the old caulking may have to be removed. It is important to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk in order to make the area harder to clean and can decrease the efficiency of your energy usage.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more extreme situations, you may have to replace the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to note that if the leakage originates from the glass of your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open in a breeze It could be the hinges that are at fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Like any mechanical component, hinges can be damaged over time. It is essentially a very simple process but it can be easier to do if you have someone to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The problem can be caused either due to opening the window in the wrong way or a faulty installation at the factory. This can often be resolved by sending us a picture via our website and we will be happy to give you advice.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant to the hinges is a great method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the possibility of a window getting stuck and stop corrosion. This is recommended to be done at least every year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also be disaligned as a result of wear, creating an opening where the sash and frame meet. If they are damaged beyond repair, it may be required to realign them. The interlock may be disaligned. This happens on the hinge side and might require to be cleaned. In certain instances it is possible to replace these.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help regulate indoor temperatures and decrease the risk of draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs windows made of upvc will continue to provide a great level of insulation and security for your home. However, it is important to recognise that all windows have a life span and eventually, they will reach a point where it is more economical to replace them than fix them. If you are experiencing issues with your window made of upvc you should consult a professional as soon as possible.