• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is essential to take the time to make sure that you're doing everything you can to ensure that your windows are in good condition.

For single pane windows, it can be relatively simple to replace them, and the new window will generally fit within the frame of the previous one easily. However when windows with double panes are anchored by internal beading, it will be more difficult to remove the old panes and put in new ones. In this case, you will need to locate some plastic spacers to assist the new pane to fit correctly into the frame of the window.

If you plan to try to remove the glass panes yourself it is important to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you begin working on the glass to ensure that any shards fall onto the cloth instead of onto the floor where they can be trodden under and cause further damage.

It's a good idea to seal the gap after the glass is removed. This will keep drafts and water from getting into your home until a professional is able to fix the window. It also acts as a barrier, deterring any intruders to gain access to your home. If the distance between the window and the door is significant, you may prefer an alarm system that has an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows with sash. Over time, they can be affected by a variety of issues that include sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It's important to take action as soon as you discover that your uPVC windows are sagging.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows so you can reach the frame. After that, using an screwdriver, take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having moved your hinges. If you are happy with the fit of the window, you can tighten screws to secure them in place.

If you are unable to reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to loosen. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and safe from drafts.

uPVC handles can also loosen up. Most often it is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's relatively simple to fix a loose uPVC handle. First, you'll need close the window and then perform an initial test to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it isn't then you can use the screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it's important to take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also hamper your efforts to control the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant around the frame has been damaged or not present.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on the severity of the problem the old caulking may need to be removed before a new layer can be put on. It is essential to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area harder to clean and could reduce your energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more severe situations, you may have to replace the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is more with the seal rather than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open with a breeze It could be the hinges that are at the fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. Changing a window hinge is an easy procedure, but it is easier to do with someone else to help hold the frame up.

Verify that the uPVC hinges open and close in the correct direction. This can be done by looking for the arrow on each hinge. This shows which way the window should open.

Faulty window hinges can be caused by incorrectly opening the window in a particular manner or because of poor installation at the factory. This can often be resolved by sending us a picture on our website. We will be pleased to offer you suggestions.

It is also essential to lubricate the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also reduce the possibility of a window getting stuck and stop corrosion. This must be done at a minimum every year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. The hinges may also become unbalanced due to wear, creating gaps where the sash meets frame. If they are beyond repair, it might be necessary to have them realigned. The interlock may also become misaligned. It is located on the hinge side and could require to be cleaned. In certain instances it is possible to replace these.

The seals may wear out or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc window repairs with low-emissivity lenses. This will help regulate indoor temperatures and decrease the risk of draughts.

Another method of reducing the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. These will help to keep cold air out and keep your home warm and cozy!

With a little regular maintenance and repairs your windows made of upvc will provide a great level of security and insulation for your home. It is important to remember that all windows eventually become worn out, and it may be more cost-effective to simply replace them rather than repair them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional immediately.