• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they don't corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home, and could even be fatal. You should take the time to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace and typically fit into old frames very easily. If you have double-paned windows which are joined by internal beading, it is harder to remove and replace the old panes. In this instance, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

If you are going to attempt to remove the window panes by yourself it is crucial to wear the proper safety gear, including thick gloves and eye protection. It is also an excellent idea to lay down a drop cloth before you begin working on the glass to ensure that any fragments of glass fall on the fabric rather than on the floor where they can be trampled upon and cause further damage.

Once the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional is able to come out and repair the window. This also serves as an obstacle to stop intruders from making their way into your home. If the gap is particularly large, you may want to consider using an alarm door that comes with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. However, with time, they are susceptible to a range of issues, including sliding. A sagging uPVC windows could cause issues with light, draughts and even security. It's important to take action when you discover that your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows so you can access the frame. After that, using an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and verify the fit. If you're satisfied with the fit, tighten the screws to ensure that they remain in the right place.

If you are unable to reposition the hinges, you might have to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes their tightness to decrease. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is typically caused by screws that have loosened over time, but it could also be due to the mechanism of the handle getting worn out. It's relatively easy to fix a loose upvc window repair handle. First, you'll need to shut the window and then perform a test fitting. The corners of the sash need to be aligned with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle and then return the mechanism to its original its original position.

3. Water Leaks

It is essential to take action if you get up each morning to find mouldy walls and wet floors. Water leaks from windows not only lead to the destruction of your home's structure but also undermine your efforts to control the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or missing.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on how severe the issue is, the old caulking might need to be removed. It is essential to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and can reduce the efficiency of your energy.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the Window Repair. In more serious instances, you might have to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is with the seal than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open, or if it opens with a breeze. They can be replaced by any competent DIYer and can usually be completed in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's easy to replace a hinge on a window but it's much simpler if you have someone to help you to hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. You can check this by checking for the arrows on each hinge, this indicates the direction in which the window should open.

The issue can be caused either by opening the window incorrectly or by a poor installation in the factory. Sending us photos via our website will often solve the issue. We are always happy to provide suggestions.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the chance of windows getting stuck and stop corrosion. This should be done at least every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different factors. Firstly the hinges, again because of wear and tear, may become displaced, which will cause gaps to develop between the sash and the frame. If they are beyond repair, it could be required to realign them. The interlock may also become unbalanced. This happens on the hinge's side and may need to be cleaned. In some cases it is possible to replace these.

These seals can wear down or get damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures, and reduce the risk of draughts.

One of the most effective methods to reduce drafts is to use a draught excluder, these are usually fabric tubes that are filled with some kind of filler. They can be put on top of your windowsill. These will keep your home warm by blocking out cold air.

Your windows made of upvc will keep providing excellent insulation and security for your home by performing regular maintenance and repairs. It is crucial to recognise that windows last for a certain period of time and eventually, they will reach a point where it is more efficient to replace them than fix them. If you have any problems with your window made of upvc it is recommended to speak with an expert as soon as you can.