• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not get rusty or decay.

It is crucial to wash and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. It is important to take the time to ensure that you're doing everything you can to ensure that your windows are in good condition.

For single pane windows it is fairly easy to replace them, and the replacement is usually able to fit into the old frame very easily. If you have double-paned windows which are held together by internal beading, it is difficult to remove and replace the old panes. In this instance you'll need source some plastic spacers to assist the new pane to fit perfectly into the window frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. It is also a good idea to lay down a drop cloth before you start working on the glass so that any fragments of glass fall onto the cloth instead of onto the floor where they could be trampled upon and cause further damage.

After the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to stop drafts and water from entering the property until a professional can come out and fix the window. This will also provide an obstruction to prevent intruders from getting into your home. If the gap between the door and the window is substantial, you may need to consider an alarm system that has a window. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. Over time, they can develop a variety of issues that include sagging. A sagging window can cause problems with light, draughts and even security. It is crucial to act as soon as you discover that your uPVC windows are sliding.

Repositioning the hinges can help fix a window that is sliding. First, you'll need to unblock the windows so you can access the frame. After that, using a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and test it for fitting. If you're satisfied with the fit, you can tighten the screws until they remain in the right place.

If you aren't able to move the hinges you may need to replace the seal. Over time rubber seals can lose their elasticity and become dry, which causes them to lose tightness. It is important to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles could also become loose. This is typically caused by screws that have become undone over time, but it could also be caused by the handle mechanism getting worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. First, you'll need to shut the window and then perform a test fitting. The corner joints of the sash need to be aligned with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and return the mechanism to its original position.

3. Water Leaks

It is crucial to take action if you get up each morning to find mouldy walls and wet floors. Water leaks from windows not only lead to the destruction of your home's structure but also hamper your efforts to regulate the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a fairly simple fix that can be completed by any DIY expert. Depending on the severity of the problem is, the old caulking might need to be removed. When it comes to uPVC repair, you should avoid over-caulking. This can make your window more difficult to clean and reduce its energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious situations, you might have to consider replacing the window repairs.

Mold spots and rotten sills are also signs of water leakage. The mold thrives in damp environments and can quickly spread throughout the house.

It is also important to note that if the leak is coming from between the glass of your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. This can be easily repaired by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it opens with a breeze. These are easily replaced by any competent DIYer and can be done within a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. The process of replacing a hinge on a window is an easy procedure, but it is easier if you have someone to help hold the frame up.

Make sure that the uPVC hinges are closed and open in the right direction. This can be done by looking for the arrows on each hinge, this shows which way the window should be opened.

The issue could be caused either due to opening the window in the wrong way or by a poor installation at the factory. Sending us photos via our website will often solve the issue. We are more than happy to provide advice.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also stop corrosion and decrease the chance of sticking. This is recommended to be done at least every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. Firstly the hinges, again because of wear and tear, can become misaligned, this can cause an opening to appear where the sash joins the frame. If they are damaged beyond repair, it might be required to realign them. Second, the interlock can also become misaligned. This happens on the hinge's side and could require to be cleaned. In some cases it might be necessary to replace the hinges.

The next common cause of draughts is the window seals. These are susceptible to being worn out or damaged over time, and will allow air to escape through these gaps. Replacement of these with high-quality weatherstripping can help stop draughts. Another option is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and will reduce the risk of draughts.

Another, and most effective ways to reduce drafts is to use an draught excluder. These are typically made of fabric that are filled with some kind of filler. They can be placed on the top of your windowsill. These will keep your home warm by blocking cold air.

With a little regular maintenance and repairs your windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is essential to remember that all windows will eventually get worn out and it could be cheaper to replace them instead of fixing them. If you are experiencing issues with your Upvc window you should consult a professional immediately.