• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They do not decay or rust as aluminum or timber.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good shape.

Single-pane windows are relatively simple to replace and generally fit into frames that were previously in use very easily. However, if you have double-pane windows that are held in place by internal beading, it will be more difficult to take out the old panes and put in new ones. In this case, you will need to locate some plastic spacers that assist the new pane to fit perfectly into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall on the fabric, not onto the floor, where they could be trampled.

It's a great idea seal the gap after the glass is removed. This will prevent drafts and water from getting into your property until a professional is able to repair the window. This also serves as a barrier to prevent any criminals from getting into your home. If the distance between the window and the door is significant, you may need to consider security screens that includes windows. This will provide the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. Over time, they can develop a number of problems such as sagging. A sagging uPVC window can cause issues with light, draughts, and even security. It is crucial to act immediately if you discover that your uPVC windows are sagging.

Repositioning the hinges can help fix a window that is sliding. To do this, you'll have to open the window repairs so that you can get to the frame. Then, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, shut your window and check for fit. If you're happy with the fit, you can tighten the screws until they remain in position.

If you are unable to move the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to loosen. If this happens, it's crucial to replace the seal as soon as possible so that your uPVC windows remain watertight and draught-proof.

uPVC handles could also loosen. This is usually due to screws that have been removed over time, but it can also be caused by the handle mechanism wears out. It's relatively simple to fix a loose uPVC handle. You'll first need to close the window and perform an initial fitting. The joint at the corners of the sash must align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is crucial to take action if you get up each morning to find mouldy walls and floors that are wet. Windows that leak water do not only lead to the destruction of your home's structure but also undermine your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on the severity of the issue is, old caulking may have to be removed. It is essential to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and could reduce the efficiency of your energy.

Make sure that the drainage holes do not have debris in them, and also ensure that the sill pan is properly angled to allow the water to drain from the window repair. In more extreme cases, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely the issue is with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or if it opens with a breeze. Anyone with the skills to fix them can replace these in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is easier with someone else to assist in holding the frame up.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can check this by looking for the arrows on each hinge. This indicates the direction in which the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a particular way or by improper installation in the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be happy to give you advice.

Regularly lubricating the hinges is also necessary. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. This should be done at least every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. The hinges, also because of wear and tear, could become misaligned. This can cause a gap to form between the sash and the frame. This can be easily repaired by giving them good cleaning, but in the event that they are beyond repair it could be necessary to get them realigned or replaced. The interlock may be unbalanced. This is located on the hinge's side, and might require to be cleaned. In some instances it might be necessary to replace these.

The second most frequent reason for draughts is window seals. These are prone to wear or damaged over time and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures and lessen draughts.

Another, and most effective ways to cut down on draughts is by using an draught excluder. These are usually fabric tubes that are filled with some sort of filler and can be put on top of your windowsill. They will help block out cold air and keep your home warm and cozy!

Your windows made of upvc will continue to provide excellent insulation and security for your home with a little regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it is cheaper to replace them than to repair them. If you encounter any issues with your upvc window you should consult a professional immediately.