• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to rot or rust like aluminum and timber.

It is essential to clean and oil UPVC windows and doors regularly. This will help prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, making it very hazardous and possibly fatal. It is important to make sure that your windows are in good shape.

For single pane windows, it is relatively easy to replace them, and the new window will generally fit within the old frame very easily. If you have double-paned windows that are held together by internal beading, it is difficult to remove and replace the old panes. In this situation, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass to ensure that any shards will fall onto the fabric instead of onto the floor where they can be trodden under and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to stop water and drafts from getting into the home until a professional comes out and fix the window. This will also provide a barrier to prevent any intruders from getting into your home. If the gap is large, you may want to consider using the security door with an integrated window repairs near me, since this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. In time, they could be affected by a variety of issues such as sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It's crucial to act as soon as you discover that your uPVC windows are falling down.

To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll have to open the window to access the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to check the fit after you have moved your hinges. If you're satisfied with the fit, tighten the screws to ensure that they stay in the right place.

If you can't reposition the hinges, you might require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to lose their tightness. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also become loose. Often this is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. The first step is to close the window and then perform an initial test to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it does not you can use a screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains it's important to take action. Windows that leak water do not only lead to the destruction of your home's structure but also hamper your efforts to regulate the temperature within your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or is missing.

This is a simple fix that can be done by any DIYer who has the ability. Depending on the severity of the issue is, the old caulking may have to be removed. It is important to keep in mind that when it comes to upvc window repairs (visit my webpage), you should avoid the temptation to "over-caulk and then make the area harder to clean and reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to note that if the leakage originates from the glass of your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. Again this can easily be corrected by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open in a breeze It could be hinges at fault. Any competent DIYer can replace these in a matter of minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that are hinged and, just like any mechanical component they will wear out over time. It is essentially a simple procedure, but it is easier if you have someone to help hold the frame in place.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The problem can be caused either due to opening the window in the wrong way or by a poor installation in the factory. Sending us photos through our website can often resolve the problem. We are always happy to provide advice.

It is also important to grease the hinges on a regular basis. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It can also lower the risk of a window getting stuck and stop corrosion. The ideal time to perform this every year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different factors. The hinges can also become disaligned as a result of wear, which can cause a gap where the sash meets frame. If they're beyond repair, it may be required to realign them. The second is the interlock, which is on the hinge side of the window, may be misaligned. Again, it's possible to just give them a clean but in certain cases, it may be necessary to get them replaced.

These seals can wear down or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures and decrease the risk of draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking cold air.

Your upvc windows can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is crucial to recognise that all windows have a lifespan and there may come the point when it's more efficient to replace them than repair them. So, if you are experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional as soon as you can.