• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. It is essential to make sure that your windows are in good condition.

For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the frame of the previous one easily. However If you have double-pane windows that are anchored by internal beading it will be more difficult to remove the existing panes and install new ones. In this case, it is necessary to buy plastic spacers to aid in fitting the new pane into the window repairs near me frame.

If you plan to attempt to remove the window panes yourself it is important to wear the proper safety gear such as gloves that are thick and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor which could cause them to be trampled.

It's a good idea to tape the gap once the glass is removed. This will prevent water and drafts from entering your property until a professional arrives to repair the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the distance between the door and the window is significant, you may want to use security screens that has an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows with sash. However, over time, they may be afflicted by a variety of problems including sagging. A sagging uPVC window can cause problems with light, draughts, and even security. It's crucial to act when you realize that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window that is sliding. To do this, you'll need open the window so that you can get to the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after having relocated your hinges. If you are happy with the size of the window, you can tighten screws to keep them in place.

If you are unable to reposition the hinges you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to loose their elasticity. If this happens, it's important to replace the seal as quickly as you can to ensure that your uPVC windows remain watertight and draught-proof.

uPVC handles may also become loose. Most often it is due to screws that have become loose over time. However, it can occur because the handle mechanism has worn out. It's fairly simple to fix a loose uPVC hand. You'll first need to close the window and then perform a test fitting. The corners of the sash must align with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and mouldy walls every time it rains it's important to take action. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or not present.

This is an easy fix that can be done by any DIYer who is competent. Based on the severity of the problem the old caulking may need to be removed before a new layer of caulk can be applied. It is essential to keep in mind that when it is about upvc window repairs, visit their website,, you should not be tempted to apply too much caulk in order to make the area harder to clean and reduce the efficiency of your energy.

Verify that the drainage holes do not have debris in them and that the sill pan is properly angled to drain away from the window. In more serious situations, you might need to consider replacing the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to remember that if the leakage originates from the glass of your double-glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. It is also possible to be corrected by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with ease it could be hinges that are at the fault. These are easily repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. It is very easy to change the hinges on a window, but it's easier if someone helps hold the frame.

Make sure that the uPVC hinges are closed and open in the proper direction. This can be done by checking for the arrows on each hinge, this shows which way the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a certain way or by improper installation in the factory. This can often be resolved by sending us a photograph on our website. We will be happy to give you suggestions.

It is also important to grease the hinges regularly. Applying a light engineering lubricant on the hinges is an ideal method of doing this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. It is recommended to do this once a year. WD40 or other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. Firstly the hinges, again due to wear and tear could become misaligned. This can cause gaps to develop where the sash joins the frame. This can be easily fixed by giving them a good clean, but in the event that they are beyond repair it might be necessary to get them re-aligned or replaced. Secondly the interlock, this is located on the hinge of the window, can also become misaligned, again it may be possible to just give them a good clean, but in some instances it could be necessary to have these replaced.

The second most frequent reason for draughts are the window seals. These are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures, and also lessen the possibility of draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be placed over your window repair near me sill. They will keep your home warm by blocking out cold air.

With a little maintenance and repairs windows made of upvc will provide excellent insulation and security for your home. It is important to remember that all windows will eventually wear out and it could be more cost-effective to simply replace them rather than repair them. If you are experiencing problems with your upvc windows, it's recommended to seek help from a professional as soon as you can.