• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Window sashes must be regularly checked for mold, mildew and other damage. By catching problems before they become serious you can save money on repairs in the future.

The sash is an interior frame that moves up and down vertically in windows that open. This article will show you how to perform several simple sash repair.

Weather Stripping

Wood window sashes provide the classic look to your home. If properly maintained, can last for many years. However, they can become damaged or degraded with time due to exposure or normal wear. Sash repair specialists can restore windows to their original condition and maintain their beauty much longer than replacement windows.

The first step for sash window repairs is addressing weather stripping. It's found on both the sash as well as the frame. It can cause drafts if it's damaged or is loose. To fix it, start by finding your window brand and the date on which the glass was manufactured (etched in the corner of the glass or on the aluminum spacer between panes). Then, take the sash off and mark its width and height to find replacement weather stripping to match.

Then, remove the sash from its holder, and place it on flat surfaces to allow you to access all four sides. If your sash is double-hung, you'll need to remove the weights as well as the ropes that go with them that should have fallen into the pocket that was intended to be in the jamb liner. Once you've taken the sash off, use a utility knife to cut away the weather stripping that was formerly in place at the corners, then take it off by hand or with a putty knife.

When the sash is clean and clean, you can put in the parting stops. These are long pieces that divide the sashes. Pam prefers the standard 1/2-inch by 3/4-inch window trimmings from the lumberyard. However, you could substitute a scrap piece of wood.

After removing the stoppers for parting and cutting them to the desired length, apply a thin layer of glazing compound over the bottom of the sash. Smooth the compound using a putty knife, and let it dry for at least one day. Once it's fully cured and dried, apply a second coat of acrylic latex paint. This will help protect the putty and give your sash an updated look.

Sash Hardware

The hardware that holds window sashes is prone to wearing out from age and use and the result could be a door or window that can't be opened or closed easily. It's important to know that replacing and fixing this hardware is usually simple and inexpensive. If you're having difficulty opening a sash spray some lubricant into the jamb channel. Then, you can slide the sash out to see if it resolves the problem. If the issue persists it's most likely the sash balance. It is necessary to take off the window sash to access the hardware.

Sashes for windows should be able to open and close with little effort. However, this can be difficult if weights are worn out or the sash-to rail connecting rail isn't properly glazed. This issue could be caused by a number of things, such as lack of maintenance or by an incorrect weight rating for the particular window sash.

If the hinges on the window begin to move, this can cause the sash drag and eventually hit against the frame at the opposite corner (Photo 1). To address this issue, first make sure the sash is squarely inserted into the frame's opening and then remove it from the upvc window repair near me. If the sash was attached to the hinge arm, remove the hinge and replace it. (Photo 2). Then, you can install the new sash (Photo 3).

Because of sagging hinges and a general lack of energy efficiency, old windows particularly those in older homes, can be difficult to open and close. In most cases, a few simple repairs can transform these windows into smooth operation again and save the homeowner cash on energy costs.

In order to make these sash repairs it is important to have all the necessary tools in place before you begin. Mark the hinge channel location on the frame (Photo 1) using pencil. This will assist you in getting the channel back in the correct position after you've finished. Remove the sash and remove the hardware, including the parting beads (Photo 2) and the cords or chains which hold it in place. A hot gun with nozzle shield and a medium setting can soften any putty that has been hardened. Remove the old sash, and keep it in a bag with a label.

Sash Weights

Whether your window sash repairs are to replace a damaged cord or to ensure that the windows are functional by replacing worn out weights for sash will improve its operation and reduce the energy cost. Sash weights are hefty lead or iron cylinders, which are enclosed in a concealed cavity and linked to the moveable the sash with rope. They are counterbalancers, allowing the window to be closed and opened without the need for mechanical or electrical devices. If they fail, sashweights tend to be neglected or not used by homeowners.

It is difficult to recover the sash-weight that fell from the cavity, so you'll want to find one that is suitable for the. You will also require a new piece of string, a length sashcord and a few sashpulleys for tying the weights you are replacing to the cord.

Mortise and Tenon joints are used to join older wood windows. The wood pegs that hold the parts together can be removed by a pin punch and hammer. The majority of them are large on one side, and smaller on the other. It is essential to remove first the smaller diameter sides. Later sashes utilized glue instead of pins. They can be separated with a knife and a mallet.

Once the sash has been removed, you can take off the sash stops and gain access to the pockets for weights. Usually, this is done through an opening in the bottom of each jamb. This hole is then covered by a wooden access panel that can be ripped off to let you see the inner workings of the frame.

After the sash has been stopped and the access panel is removed, you can remove the weight that was previously installed and replace it. Be sure to weigh the sash prior to you do this, since the old weights could be different sizes than what is needed. After the new weight has been installed, thread an appropriate length of string through the pulling mechanism. Then nail the string to the frame, leaving a few inches of string hanging from the head to allow for future adjustments.

Sash Cords

In most old double-hung window, a cord or chain is attached to the weights. This keeps the sashes within the jamb level. As time passes, these cords may break, making it difficult to raise the window. A new sash cable will give you the ability to move and lower the sash and ensure it stays in place when it is opened.

To replace sash cords, the first step is to remove the access panels from the jambs. They are typically installed by screws or nails and will require to be removed or moved. It is possible to remove them with an axe or hammer, however, it is best to lay out dust sheets prior to starting any work.

After the access panel has been removed, you can start working on the sash. Make the small parting beads (also called "tie rails") out of their grooves with a chisel or flat bar. These are often wedged in or nailed in, but they can be removed which is why it's worth your time. If the sash remains in place, pry the mortise and tenon joints free using a hammer or screwdriver and then remove each wood peg. You should now be able to move the sash back and forth freely, though it might require oiling if it seems stiff.

Determine the length of the sash chain or sash cord required to reach the sash slot at the bottom of the pulley located at the top of the jamb. Cut the cord/chain and fix it using the previous step. You can employ a hammer and screws or nails, however nails are less likely to cause damage.

If you haven't purchased a kit that replaces the counterbalance system that was in place before, it's recommended to keep the original weights for balancing in place. They're not costly and are easy to install if purchased them from architectural salvage stores. Based on the size of your window two or three sash weights might be required to keep the sash in an open position.