• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. They do not get rotten or rusty like timber and aluminum.

It is essential to clean and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good condition.

For single pane windows it is relatively easy to replace them, and the replacement will usually fit inside the old frame very easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this case you'll need to find some plastic spacers to aid the new pane in being able to fit perfectly into the frame of the window.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a drop cloth prior to when you start working on the glass to ensure that any shards will fall onto the fabric instead of landing on the floor where they could be trampled upon and cause further damage.

It's a great idea to cover the gap with tape after the glass is removed. This will keep drafts and water from getting into your property until a professional is able to repair the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap between the door and the window is large, you might prefer a security screen that also includes an opening. This will give you the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. However, over time they may be afflicted by a variety of problems including sliding. A sagging window in uPVC can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from getting worse.

Repositioning the hinges can aid in fixing a window that is sagging. To accomplish this, you'll have to open the window to access the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you are happy with the size of the window, you can tighten screws to secure them in the right position.

If you are unable to move the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to loosen. It is essential to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is typically caused by screws that have loosened over time, but it could be due to the handle mechanism wearing out. It's relatively simple to repair a loose uPVC handle. You'll first need to close the window and do an initial fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle, and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is important to act if you get up each morning to find a smoky wall and wet floors. The leaks of water through windows could cause structural damage to your home, and affect your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on the severity of the issue is, old caulking may need to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and could reduce the efficiency of your energy.

It is important to check that any drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This mold thrives in damp environments and can quickly spread across the house.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. A upvc window repair near me specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open in a breeze It could be hinges that are at fault. These are easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's easy to replace a hinge on a window however it is easier if someone helps you to hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain manner or because of poor installation at the factory. Sending us photos via our website will often solve the issue. We are more than happy to give assistance.

It is also essential to lubricate the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. The ideal time to do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges may also become disaligned as a result of wear, causing a gap where the sash meets frame. This can be easily fixed by giving them a good clean, but when they're beyond repair, it might be necessary to have them realigned or replaced. In addition, the interlock could be misaligned. It is located on the hinge side and may need to be cleaned. In some cases, it may be necessary to replace them.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures and lessen draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs windows made of upvc will provide a great level of security and insulation for your home. It is important to remember that all windows eventually become worn out, and it could be cheaper to replace them rather than repair them. So, if you're experiencing issues with your Upvc windows, it is best to seek professional assistance immediately.