• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they don't rust or rot.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, making it very dangerous and potentially fatal. It is essential to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace and will usually fit into the frames that were previously in use very easily. If you have double-paned windows that are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass to ensure that any shards will fall onto the fabric instead of onto the floor, where they could be trodden under and cause further damage.

It's a great idea to tape the gap once the glass has been removed. This will stop drafts and water from getting into your property until a professional comes out to fix the window. This also serves as a barrier to prevent any intruders from making their way into your home. If the gap between the window and the door is large, you might prefer a security screen that also has a window. This will provide the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. In time, they could develop a variety of issues such as sagging. A sagging window can cause problems with light, draughts or even security. It's important to take action when you notice your uPVC windows are falling down.

To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows so you can get at the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and test it for fitting. If you are happy with the fit of your window, tighten the screws to hold them in place.

If you are unable to reposition the hinges, you could need to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes them to lose tightness. It is crucial to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. This is usually due to screws that have become undone over time, but it can be due to the mechanism of the handle wears out. It's relatively easy to fix a loose uPVC handle. First, you'll need to shut the window and perform a test fitting. The joints at the corners of the sash should align with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on the severity of the problem is, the old caulking may have to be removed. It is essential to remember that when it is about uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area harder to clean and decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is with the seal than the frame. It is also possible to be repaired by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your upvc window repair window is difficult to open or if it blows open with the breeze. They can be easily repaired by any skilled DIYer and can be completed in just a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. It is essentially a simple process, but it's easier to do if you have someone to help hold the frame up.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a particular way or due to poor installation at the factory. Sending us photos via our website will often resolve the problem. We are always happy to offer suggestions.

It is also crucial to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It can also prevent corrosion and reduce the possibility of sticking. It is recommended to do this once a year. WD40 or other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges can also become misaligned due to wear, which can cause an opening where the sash and frame meet. If they're beyond repair, it might be necessary to get them re-aligned. Secondly the interlock, this is on the hinge side of the window, can be misaligned. Again, it's feasible to give them a good clean, but in certain cases, it may be necessary to have them replaced.

The second most frequent reason for draughts are the window seals. They are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures, and reduce the risk of draughts.

The final method to cut down on draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler which can be hung over your window sill. They will help keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repair, your upvc windows will provide excellent security and insulation for your home. It is essential to remember that all windows will eventually become worn out, and it may be more cost-effective to simply replace them than to repair them. If you are experiencing issues with your Upvc window, it's best to consult an expert as soon as you can.