• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to get rotten or rusty like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, making it very dangerous and potentially fatal. It is important to ensure that your windows are in good condition.

For single pane windows, it is relatively easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. However when you have double glazed window repairs near me pane windows that are secured by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this instance, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

If you're planning to attempt to remove the glass panes yourself, it is essential to wear the proper safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not on the floor, where they could be trampled under.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block drafts and water from entering the home until a professional comes out and fix the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap is particularly large, you may think about a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can be affected by a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It's crucial to act when you notice your uPVC windows are sagging.

To fix a sagging window you can try to reposition the hinges. To do this, you'll need open the window so that you can access the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and check for fit. If you are happy with the fit of your window, you can tighten screws to hold them in the right position.

If you are unable to reposition the hinges, you may have to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's important to replace the seal as fast as possible so that your uPVC windows are watertight and secure from draughts.

uPVC handles may also become loose. Often, this is caused by screws that have come loose over time. However, it can occur because the handle mechanism has worn out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. The first step is to close the window and perform an initial test to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

It is important to take action if you get up each morning to find mouldy walls and wet floors. The leaks of water from windows do not only lead to the degrading of the structure of your home but also hamper your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be done by any competent DIYer. Depending on how severe the problem is, the old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area more difficult to clean and reduce the efficiency of your energy.

It is important to check that the drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious cases you may need to think about replacing the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass it is more likely that the issue is more with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open in a breeze It could be hinges that are at the fault. These are easily repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Like any mechanical part hinges are prone to be damaged over time. It is essentially a very simple procedure, but it is easier when you have a person to help you hold the frame up.

Verify that the uPVC hinges are open and closed in the proper direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The problem can be caused due to opening the window repairs in the wrong way or a faulty installation at the factory. Sending us a picture via our website is often enough to resolve the problem. We are always happy to provide assistance.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant on the hinges is an ideal way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It can also lower the possibility of a window getting stuck and stop corrosion. This is recommended to be done at least once a year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges, also because of wear and tear, could become misaligned. This can cause a gap to form between the sash and the frame. If they're beyond repair, it might be necessary to get them re-aligned. The interlock may also become misaligned. This happens on the hinge's side and could require to be cleaned. In certain instances it is possible to replace the hinges.

The next most common reason for draughts is window seals. These can become worn down or damaged over time, and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures, and reduce the risk of draughts.

Lastly, one of the most effective methods to reduce drafts is to use a draught excluder, these are usually fabric tubes which are filled with a kind of filler. They can be placed on the windowsill on top. These will help to keep cold air out and keep your home warm and cozy!

With a bit of regular maintenance and repair your windows made of upvc will provide excellent security and insulation for your home. It is crucial to keep in mind that all windows eventually get worn out and it could be more cost-effective to replace them instead of fixing them. If you encounter any issues with your Upvc window it is recommended to speak with a professional as soon as you can.