• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Why is My Car Ignition Locked?

There are several reasons why your ignition in your car may be locked. One reason is that the key is dirty or has a damaged wafer inside. It is possible to fix this by sliding the key into and out of the cylinder many times.

Another possibility is that the pins inside the lock cylinder have become stuck. You can use a small tack hammer to gently tap the cylinder to loosen them.

Check the Battery

If the car is in Park or neutral, but won't turn on when the key is inserted into the ignition, it could be a problem with the shifter switch for the transmission. This can be repaired by moving the shifter up or down to put the car ignition key replacement into the gear.

If the car doesn't turn, the problem could be with the neutral safety cable, or the transmission shifter. A mechanic or an auto locksmith can easily solve these issues.

It's also possible that the ignition cylinder has worn out. Over time, both the ignition and key can become worn out making them difficult to remove or insert. A lubricant like silicon lock grease could solve this problem, allowing the wafers to slide into the proper position.

Lint from your pocket and adhesive from tape that holds packages together can also build up on the key, which prevents it from being able to slide into the ignition. To solve this problem, you can try cleaning the keys with a cloth or using a cleaner such as Triflow. You can also try a spare key in order to determine if the problem is the key or ignition.

When the key is in the ignition you can tap it with an hammer that is small. This will cause a small vibration, which could be enough to loosen the wafers inside the ignition and let them slide into the right position. However, you should be very careful not to scratch the key or the ignition cylinder.

If all of the above methods are unsuccessful, it's time to contact a locksmith or automotive mechanic to have it looked at. The key may be damaged within the cylinder for ignition or it could be time to replace it completely. If the issue is with the key, a locksmith will be able to create a new one for you. If the issue is with the ignition cylinder, your car will need to be brought into a repair shop to get it replaced. Luckily, these issues are usually very easy to repair.

Examine the Steering Wheel

A steering wheel that is locked can cause the ignition to not turn. This can happen if the driver accidentally engages it while exiting or enter the vehicle and is usually caused by pulling on the wheel while balancing themself against it using their hands. It can also happen if someone in the rear seat has a mishap and engages the brakes while they exit the vehicle.

Luckily it's a simple fix that does not require a trip to an expert locksmith or mechanic. First, make sure that the gear shift is in neutral or Park. If it isn't, simply push or pull the shifter gently until it changes into one of these positions. It is also essential to press the brake or turn on the handbrake prior to trying to turn the key.

If the wheel isn't locked taking a look at the steering column will tell if the key has been engaged with the lock. This is usually marked by a tiny "Lock" label in the lower portion of the ignition circle. It is possible to disengage this by gently jiggling or pulling the key with moderate force. It is important to not apply too much pressure since this can damage the key, or even break a wafer in the lock cylinder.

A spare key can also be used to disengage the lock. This could mean that the key is worn out and cannot engage the wafers in the lock cylinder. A professional at Karl Chevrolet Webster City can create a new key if this is the case.

If the new key still isn't engaging, a quick spray of penetrating oil can help. Apply a small amount penetrating oil to the keyhole and ignition. Then, jiggle the key or tap it lightly to make sure it is working. If this doesn't work, you may need to speak with a specialist at your local dealership for cars. They will be able to provide you with a new key and can also replace the ignition cylinder, if required.

Check the Key

It could be that your key has been damaged if it does not engage in the ignition. You can get rid of any foreign material (lint from packing tape or adhesive) from the key. You can also try rubbing alcohol on the key or Goo Gone to see if it helps.

It is possible that the lock pins inside aren't moving correctly when you insert the key. You can test an extra key by gently removing it of the ignition once you have put it in. You should be capable of hearing and feeling the pins moving inside. If you don't feel any movement, you could grease them with graphite. You can buy graphite in small tubes which can be sprinkled into the keyhole. This will allow the pins to slide into position when you insert the key, and will prevent them from getting stuck.

It is possible that your key has damaged or worn out and isn't able to connect with the pins within the ignition cylinder. This can cause the cylinder of ignition to not to turn, which can prevent you from starting your car. If this happens you'll need to bring your car to a locksmith or repair shop for repair.

If you can turn your vehicle with a spare key and you've eliminated any issues with the steering wheel or battery It could be that the ignition cylinder has worn out. You can attempt to loosen the lock cylinder using the sharp end of a screwdriver, or the handle of the Hammer (not the head). Gently tapping on the cylinder can often release it and allow you to turn your key and start your car. If this does nothing, you'll need to have the lock cylinder replaced by a mechanic.

Check the Ignition Socket

The ignition socket is the place where your key slides in and out when you insert it. It is prone to getting blocked with debris, or just wear and wear and tear. You can try squirting some silicon lock lubricant (like WD-40) into the ignition to make things move along.

You can also use the small hammer, and tap gently on the inside of the ignition to try to loosen or reset the pins that are out of alignment. Be careful not to overdo this, or you could cause serious damage to the ignition switch.

It is crucial to confirm that your car's transmission is set to park or neutral before you attempt this. A lot of newer vehicles come with an option to lock the steering wheel when it is not in neutral or in park. This will stop the ignition key from turning.

If you have tried these steps and your key doesn't turn, it is possible that the ignition housing has to be replaced. It is important to know that different vehicles will require different procedures for replacing the ignition cylinder.

This typically involves removing the plastic cover that covers the steering column and ignition assembly. To remove it, you'll need adjust the tilt-wheel to its lowest position. Then unscrew any fasteners holding it in the position.

After you have removed the cover, you'll need to take off the old ignition cylinder from the steering column. It is then important to compare the new one you bought with the previous one to ensure that they're the same. Following this step is completed, you can install the new ignition cylinder in the same way as the previous one.

Sometimes, despite our efforts, the ignition will be damaged and require replacement. It is recommended that if this happens, you contact an Tempe Locksmith. A locksmith will assist you in choosing the appropriate replacement and install it properly to ensure that your car can start again.