• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Double Glazed Window Repair

Double glazing is a great investment in energy efficiency. It prevents loss of heat during winter months and helps to keep your home cool during summer. Repairing your double-glazed windows whenever needed is a great way to ensure they are in good condition.

Over time condensation and misting may impact your double-glazed windows. This can cause your double glazed windows to be difficult to open or close.

Broken Panes

A rogue ball, a flying stone from your lawnmower or even a storm that is strong enough can break the double pane windows of your home, leaving you home vulnerable to the elements. While a cracked window can be difficult to fix, you don't have to replace it entirely. In fact the insulated glass between the two panes remains in good condition and you can repair your double-pane window with a bit of DIY effort.

You'll first need to remove any broken glass from the frame. This will be a messy job, and you'll want to be careful to stop any glass fragments from falling on the floor or falling out of the frame. Make sure you wear gloves to protect your hands and a cloth to cover the area surrounding the broken glass to prevent further breakage or cuts. After you have removed the broken glass clean the frame of the window thoroughly to remove any sealant or other debris. It is essential to smooth rough areas of the frame to create a smooth surface for your new glazing.

After cleaning the frame then you can apply a new layer of glazing to the seam where the damaged pane was removed. This is the best method to protect and seal your window, and will save you money by preventing drafts and water from entering the home. The next step is to choose the material for your glazing. Some options include clear tape which is more robust than regular tape and will help keep your window from further cracking, and glazing film that resembles clear plastic wrap. This choice has the benefit that it can be painted to match your frame and can also shield your windows from the elements like ice and rain.

Whatever material you decide to use it is important to press the glaziers points into that seam where the putty meets your frame. They will help hold the new glass in place and assist it stick to the frame. Hardware stores carry glazier's point ropes that you can roll out onto the frame rabbets.

Condensation

Double glazing can be susceptible to condensation issues and if you experience this issue, it is recommended to contact the company that supplied the window. Many companies offer warranties and guarantees to cover the issues. Condensation and fogging in the panes of glass is a clear indication that the seals between your windows have been damaged and must be repaired by a professional who will replace both panes.

It's a complicated process that requires special tools to remove and replace the window. A professional can handle this task and provide the equipment. Using these tools can be dangerous, so it is always best to leave this type of work to a professional.

If you do decide to do this yourself, ensure you wear safety glasses and gloves to protect yourself from broken glass pieces that might fly away during the process. It is essential to take out all metal or putty points from the grooves that will receive the new window. You will also want to brush the frame with wire, and then vacuum or wipe it with a damp cloth. After the frame is dry you'll have to purchase a replacement piece of glass that's 1/8" shorter in both directions than your existing window. Check the glass's fit into the grooves.

You will need to apply a layer silicone caulk in the grooves of your frames to ensure your glass is secure in its installation. After the caulk is dry, you will need to smooth it and make any needed adjustments. The wood molding can then be reinstalled.

If the weather abruptly changes, double-glazed windows may become difficult to open and close. Extreme temperatures can cause the frames of double-glazed windows to expand or shrink, causing them to sag and stick. You can try wiping down the frames with water and then lubricating them if this is the case however, it's better to consult the company that installed your windows.

Misunderstood

Misted Double Glazing is a problem with windows that develops when moisture gets trapped between the glass panes of double glazed windows. Double glazing is comprised of two glass panes which are separated by an insulating area, typically filled with argon gas for increased thermal efficiency. This creates an airtight seal that keeps warm air inside and cold air outside, allowing you to keep your temperature at a comfortable level in your home.

The seal could become damaged over time and water can accumulate between the glass panes, causing them misty. This happens because the gap between the panes gets heated by the sun, which causes water vapour to form within it.

This is a normal thing to happen but if it happens between the window panes it can cause a problem as it is no longer able to control the temperature in the room and allow the outside temperature to affect the indoor temperature. If you notice that your double-glazed windows have become blurred, call the experts at Northfield Glass to investigate.

We can replace the individual blown sealed unit without needing to replace the entire window, which is a lot less disruptive than a full replacement. Our misty window repair involves taking off the glass unit, washing it, then replacing it with a fresh one to create an watertight seal.

There are companies within the industry that claim to cut holes into your windows with mist and inject chemicals into them which they say removes the condensation and fog, however, we don't recommend this method. This method isn't just unsightly but could also damage your toughened glass, leaving you with a upvc window repair near me that isn't functioning properly.

It is important to fix the issue as quickly as possible, as left untreated it can lead to mould growth which can not only damage the window, but also poses health risks for your family. The moisture in the window may cause other issues within your home, such as damp or rot. In some cases, it may be necessary to replace the entire window.

Blown or Failed

Modern double-glazed windows come with two glass panes with an inert gas or air in between them. This helps to improve their thermal efficiency, allowing heat in and cold out. As time passes, the gas can become depressurised which can lead to a range of issues.

One of the most frequently encountered is condensation that forms between the panes. It's not a sign of a window failure, but it could indicate that you should reseal the windows. Condensation is also an indication of a damaged double glazing, which will require a re-installation.

Also, look out for drafts coming through your double-glazed windows. This could be because of a failed seal or handle that is broken, or a damaged lock. It is essential to fix this issue as soon as possible. A draft will force you to pay more for heating. Test the seals around the window frame by smelling cold air.

You will also notice water beads on the inside of windows if your window seals aren't working. This is an indication that you have to reseal the double glazed windows.

Your window frames are designed to move a little bit in order to do to keep the glass sheets in their place. In time, this special packaging material can become compressed. This could result in the seal being broken. This allows air to flow between the panes and reduce the efficiency of your window.

A blown seal is an obvious sign that your double glazing is damaged and must be fixed as soon as possible. A damaged seal will stop your double glazing from performing its primary function of keeping the cold out and warm inside. A damaged seal could let moisture in your home, which can result in mold and other unpleasant conditions. Contact a double-glazing specialist as soon you notice a blown window seal. They can fix the entire unit.