• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't get rusty or decay.

It is essential to clean and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, which can make it very hazardous and possibly fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good condition.

For single pane windows, it is relatively easy to replace them, and the replacement will generally fit within the frame that was previously installed easily. If you have double-paned windows that are joined by internal beading, it will be difficult to remove and replace the old panes. In this case you'll need find some plastic spacers that will help the new pane to fit perfectly into the frame of the window.

If you're planning to attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also a good idea to lay down a dropcloth before you start working on the glass to ensure that any shards fall onto the cloth instead of onto the floor, where they could be trampled upon and cause further damage.

It's a great idea to tape the gap once the glass is removed. This will stop drafts and water from getting into your home until a professional arrives to fix the window. This will also act as a barrier that will prevent any intruders from gaining entry to your home. If the gap between the window and the door is significant, you may want to use an alarm system that has a window. This will give you the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. However, with time, they are susceptible to a range of issues like sliding. A window that is sagging can cause problems with light, draughts, and even security. It is crucial to act as soon as you realize that your Upvc window repair windows are sliding.

Repositioning the hinges can aid in fixing a window that is sagging. You'll first need to open the windows to reach the frame. Then, using an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and verify the fitting. If you are happy with the fit of your window, tighten the screws to hold them in place.

If you are unable to reposition the hinges you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to loosen. It is important to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen. This is typically caused by screws that have become undone over time, but it could also be due to the mechanism of the handle wearing out. It's relatively simple to repair a loose uPVC handle. You'll first need to close the window repair and do a test fitting. The corners of the sash should align with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle, and then reverse the mechanism back into its original position.

3. Water Leaks

It is important to take action if you awake each day to find a smoky wall and wet floors. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Based on the severity of the issue the old caulking may require removal before a new layer can be put on. It is crucial to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and reduce your energy efficiency.

Check that any drainage holes are free of debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more extreme situations, you may have to replace the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is with the seal rather than the frame. This can be easily repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open in a breeze, it may be hinges that are at fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. Changing a window hinge is essentially a very simple process, but it's easier to do if you have someone to help you hold the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain manner or because of improper installation in the factory. Sending us photos through our website can often resolve the problem. We are happy to offer advice.

Regular lubrication of hinges is also essential. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. Ideally, you should perform this every year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. First, the hinges because of wear and tear, can become misaligned, this causes a gap to form where the sash meets the frame. If they're beyond repair, it may be necessary to get them re-aligned. The interlock, which is on the hinge side of the window and can also become misaligned, again it may be feasible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

The next common reason for draughts is window seals, these can become worn down or damaged over time and allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will reduce the risk of draughts.

One of the most effective ways to cut down on the draughts in your home is to use an draught excluder. These are typically fabric tubes that are filled with some type of filler. They can be put on the windowsill on top. They will keep your home warm by blocking out cold air.

Your upvc windows can remain a great source of insulation and security to your home by performing regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it is more cost-effective to replace them than to repair them. If you are experiencing issues with your window made of upvc you should consult a professional as soon as you can.