• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They don't decay or rust as timber and aluminum.

It is important to clean and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, making it very hazardous and possibly fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement will usually fit inside the frame that was previously installed easily. However If windows with double panes are anchored by internal beading, it'll be more difficult to remove the existing panes and install new ones. In this instance, you will need to source some plastic spacers that assist the new pane to fit correctly into the window frame.

If you're planning to try to remove the window panes yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also a good idea to lay down a drop cloth prior to when you start working on the glass to ensure that any fragments of glass fall onto the fabric rather than on the floor where they could be trodden under and cause further damage.

Once the glass is removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional comes out and fix the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the gap is particularly large, you may think about the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows with sash. In time, they could be affected by a variety of issues, including sliding. A sagging window in uPVC could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from getting worse.

Repositioning the hinges can help fix a window that is sagging. To do this, you'll have to open the window so that you can access the frame. Then, using the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having relocated your hinges. If you're happy with the fit, tighten the screws to ensure they remain in the right place.

If you are unable to move the hinges, you could have to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to lose tightness. It is essential to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles can also become loose. This is often caused by screws that have been removed over time, but it can also be caused by the handle mechanism wearing out. It's a good thing that it's simple to repair a loose upvc window repair window handle yourself. The first step is to close the window and then perform an initial test to ensure that it fits. The corner joints of the sash need to align with the casing joint. If it doesn't you can use a screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

It is important to take action if you get up each morning to discover mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home, and affect your ability to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or missing.

It is a fairly easy fix that can be completed by any competent DIYer. Depending on the severity of the issue the caulking that was used up may need to be removed before a new layer of caulk can be put on. It is essential to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and can reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more extreme cases, you may need to replace the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed glass it is more likely the issue is related to the seal, Upvc Window Repairs not the frame. This can be easily corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, uPVC window repairs or loose and open in a breeze it could be hinges at fault. They can be easily repaired by any skilled DIYer and are usually completed in just a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that use hinges and like any mechanical part they can wear down over time. The process of replacing a hinge on a window is an easy process but it can be easier to do when you have a person to help hold the frame up.

Check that the uPVC hinges open and close in the proper direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused due to opening the window in the wrong way or due to a poor installation at the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be happy to give you suggestions.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by various factors. Firstly the hinges, again due to wear and tear may become displaced, which can cause a gap to form between the sash and the frame. This can be easily repaired by giving them good clean, but when they're beyond repair, it could be necessary to have them re-aligned or replaced. In addition, the interlock could also become disaligned. It is located on the hinge's side and could require to be cleaned. In some cases it might be necessary to replace the hinges.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and will reduce draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. These will keep your home warm by blocking out cold air.

With a little maintenance and repair windows made of upvc will continue to provide excellent security and insulation for your home. It is important to remember that all windows eventually get worn out and it is cheaper to replace them instead of fixing them. If you have any problems with your Upvc window you should consult a professional immediately.