• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They do not rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, making it extremely dangerous and possibly fatal. You should take the time to ensure that your windows are in good condition.

For single pane windows, it can be relatively simple to replace them, and the replacement will generally fit within the old frame very easily. If you have double-paned windows that are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this situation you'll need to source some plastic spacers that aid the new pane in being able to fit properly into the window frame.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the glass so that any shards will fall onto the fabric instead of landing on the floor where they can be trampled on and cause further damage.

After the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the property until a professional is able to come out and repair the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the gap between the window and the door is significant, you may prefer security screens that includes a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a number of problems such as sliding. A sagging uPVC window can cause issues with light, draughts, and window repair even security. It's crucial to act when you realize that your uPVC windows are sagging.

To repair a window that is sagging, you can try to reposition the hinges. You'll first need to open the windows to reach the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after having moved your hinges. If you're happy with the fit, tighten the screws until they stay in the right place.

If you aren't able to move the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to lose tightness. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles can also loosen up. Often, this is caused by screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need to shut the window and perform a test fitting. The corner joints of the sash should align with the casing joint. If it isn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is crucial to take action if you wake up every morning to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is either damaged or missing.

This is an easy fix that can be done by any DIYer who has the ability. Depending on how serious the problem is, the old caulking may need to be removed. It is important to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and could decrease the efficiency of your energy usage.

Check that any drainage holes are free of debris in them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious instances, you may need to replace the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to note that if the leakage originates from the glass in your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. It is also possible to be repaired by an uPVC window Repair specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your upvc window repair windows are stiff to open, or loose and blow open with ease It could be hinges that are at fault. Any competent DIYer can replace the hinges in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It is very easy to replace a hinge on a window, but it's simpler if you have someone to help hold the frame.

Check that the uPVC hinges open and close in the proper direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a particular manner or because of improper installation in the factory. Sending us a photo via our website will often solve the issue. We are happy to give suggestions.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It also decreases the chance of windows sticking and prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges, also because of wear and tear, can become misaligned, this causes a gap to form where the sash joins the frame. If they are damaged beyond repair, it may be necessary to have them realigned. The interlock may be misaligned. This happens on the hinge side and may need to be cleaned. In some instances it is possible to replace these.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help to regulate indoor temperatures and lessen the possibility of draughts.

Lastly, one of the most effective methods to reduce the draughts in your home is to use an draught excluder. These are typically fabric tubes that are filled with some type of filler. They can be positioned on top of your windowsill. These will help to block out cold air and keep your home warm and cozy!

The windows made of upvc can keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is essential to remember that all windows eventually become worn out, and it could be cheaper to replace them instead of fixing them. If you have any problems with your window made of upvc, it's best to consult a professional as soon as you can.