• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Check the windows sashes regularly for any damage, mildew and mold. By catching these problems early, you can save money on repairs in the future.

The sash is an interior framing that can be moved vertically upwards or downwards in windows that are open. This article will show you how to make several simple sash repairs.

Weather Stripping

Wood window sashes provide an elegant look to your home. When properly maintained, they can last for a long time. They can, however, get damaged or deteriorated over time due to exposure or normal wear. Sash repair specialists can restore windows to their original state and maintain their appearance much longer than replacement windows.

The first step for repair sash windows is to address weather stripping, which is found on both the sash and frame. If it's damaged or worn out, it can cause drafts and other problems. Begin by identifying the brand of window and the date of manufacture for the glass (etched on the glass's corner or the aluminum spacers between panes). Take the sash off and mark its width and height so that you can get new weather stripping that is compatible with the original.

Then, remove the sash from the holder and place it on flat surfaces to allow you to reach all four sides. If your sash has been double-hung, you must remove the weights with their ropes that should be buried inside the jamb lining. After you've removed the sash using a utility knife, you can use it to remove the old weather stripping at the corners, and then remove it manually or with a putty knife.

Once the sash has been cleared, you can replace parting stops. These are long pieces wood that are used to separate the two sashes. Pam likes to replace these with standard 1/2-inch-by 3/4-inch window trim from the lumberyard. However, you could also use a piece of scrap wood.

After removing the stopper for the parting and trimming it to length after which, apply a thin layer of glazing compound over the bottom of the sash. Smooth the compound using your putty knife, and let it dry at least one day. After it has fully dried, apply a top coat of acrylic latex paint. This will protect the putty and give your sash a fresh look.

Sash Hardware

The hardware that supports window sashes is susceptible to wear and tear from age and use, and the result can be a door or window that won't open or close easily. The good news is that repairing and replacing this hardware is generally relatively easy and affordable. If a sash is difficult to operate try spraying lubrication into the jamb channel and then slide it open to see if that resolves the issue. If not, the problem is likely to be with the sash balance and you'll need to remove the sash to access this hardware.

Ideally, window sashes must swing open and closed with very little effort, but this is a difficult task when the weights are worn or if the sash that joins rail isn't properly glazed. This problem can be caused by a number of factors, including lack of maintenance or by a mismatched weight rating for the particular sash.

If the hinges on a window begin to sag this can cause the sash drag and then hit the frame at the opposite corner (Photo 1). To fix this problem, first ensure that the sash fits squarely in the opening of the frame and then remove it from the window. If the sash has been screwed onto the hinge arm, unbolt the hinge and replace it. (Photo 2). Install the new sash next (Photo 3).

Old windows, especially those in older houses, can be difficult to close and open because of sagging hinges and an overall lack of energy efficiency. In many cases, a few simple fixes can allow these windows to operate smoothly and save homeowners money on energy bills.

In order to make these sash repairs it is important to have all the necessary tools in place before you begin. Mark the location of the hinge channel on the frame (Photo 1) using pencil. This will allow you to put the channel in the right position after you've finished. Remove the sash, and remove all the hardware including the parting beads, cords, and chains that help to hold the sash. A hot gun with nozzle shield and a medium setting will soften any putty that has been hardened. Take off the old sash and put it in a bag that is labeled.

Sash Weights

Sash weights can be replaced to improve the operation of your window sash, and also reduce the cost of energy. Sash weights are hefty lead or iron cylinders enclosed in a concealed cavity and linked to the moveable sash by a rope. They function as counterbalances and allow you to open and shut the window without the need for mechanical or electrical devices. If they fail, sashweights are usually ignored or disabled by homeowners.

It's difficult to retrieve a sash-weight that has fallen from the cavity, so you'll need to find one that fits properly. You will also need a new piece of string, a length the sash cord, as well as some sash pulleys that will tie the new sash weights the sash cord.

Mortise and Tenon joints can be used to join older wood windows. Hammers and pins can be used to cut off the wood pegs holding the components together. The majority of these pegs are big on one side and smaller on the other. It is crucial to first remove the smaller diameter sides. Sashes made later in the century utilized glue instead of pegs and can be separated by cutting the glue line using the help of a knife, and then tapping the mortised section loose using a mallet.

After the sash has been removed then you can take out the sash stop and gain access to the weight pocket. Usually this is accomplished by drilling an opening in the bottom of each jamb. The hole is then covered with the wooden panel which can be removed to reveal the inner workings.

When the sash has been shut off and the access panel has been removed, you can take off the weight you used and replace it. Be sure to weigh the sash first, as the weights you have may not be of the right size. Once the new weight is installed then tie a string to it and then thread it through the pulley of the sash. Then, you can nail the string to the frame, leaving a few inches of string sticking out from the head to allow for future adjustments.

Sash Cords

In the majority of double glazed window repairs near me-hung windows the chain or cord is connected to the weights. This keeps the sashes of the jamb balanced. Over time, these cords can get damaged and double make it impossible to raise the windows. A new sash cable can restore the ability to raise and lower the sash and keep it in place when opened.

The first step in replacing sash cords is to find and remove the access panels within the jambs. These are usually installed by screws or nails and will require to be removed or relocated. It is possible to take them out using an axe or hammer, but it is always best to lay out dust sheets before beginning any work.

After removing the access panel, you can begin to work on the sash. Utilize a flat bar or chisel, to pry the small partsing beads out of their grooves. It is important to be patient, as these are often placed in a wedge or nail. If the sash is in place, pry out the mortise and tenon joints using a hammer and pin punch or screwdriver, then remove the wood pegs that are on each component. The sash should be able to move freely now, but it may require some lubrication in order to feel less stiff.

With the sash open With the sash in an open position, measure the sash chain or cord to reach from the pulley on the top of the jamb to the sash slot in the bottom. Cut the cord or chain and attach it in Step 6 above. You can either use a hammer and screws or nails, but nails are less likely to cause damage.

It is best to keep the weights that came with the original counterbalance unless you have purchased a kit to replace the old counterbalance. They are not expensive and simple to install if you purchase them at architectural salvage stores. Depending on the size and shape of your upvc window repair near me you might need to install one or two sashweights in order to keep it open.