• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to get rotten or rusty like aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and may even be fatal. It is crucial to take the time to make sure that you're doing everything you can to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace, and they generally fit into old frames very easily. However when you have double-pane windows that are secured by internal beading, it will be more difficult to get rid of the existing panes and install new ones. In this situation it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you are going to attempt to remove the window panes yourself, it is essential to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric, not onto the floor which could cause them to be trampled.

It's a good idea to seal the gap after the glass has been removed. This will keep water and drafts from entering your home until a professional arrives to repair the window. It also acts as a barrier, deterring any intruders from getting access into your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. As time passes, they may develop a number of problems such as sliding. A window that is sagging can cause problems with light, draughts, and even security. It is crucial to act when you notice your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window that is sagging. You'll first need to open the windows so you can reach the frame. Then, using the screwdriver, you'll be able to take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window repair to check the fit after you've moved your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in position.

If you can't reposition the hinges you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to lose tightness. It is crucial to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles can also become loose. Often it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. First, you'll need to close the window and perform an initial test fit. The joint at the corner of the sash must align with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle and then reverse the mechanism back into its original position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls every time it rains it is important that you take action. Water leaks from windows can not only cause degrading of the structure of your home but also undermine your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix that can be completed by any skilled DIYer. Depending on the severity of the problem the old caulking may require removal before a new layer of caulk can be put on. It is essential to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area harder to clean and can reduce the efficiency of your energy.

It is important to check that the drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotten sills are other signs of water leakage. The fungus thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the problem is with the seal rather than the frame. This can be easily repaired by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open with a breeze It could be hinges at the fault. They can be easily replaced by any competent DIYer and can be completed in a matter of minutes.

Like any mechanical component hinges are prone to wear out over time. It is essentially a simple process but it can be easier to do when you have a person to help you hold the frame in place.

Check that the uPVC hinges open and close in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a certain way or by improper installation in the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be more than happy to give you suggestions.

It is also crucial to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is a good way to do this. We recommend using a lubricant that does not contain solvents, UPVC Window Repairs such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It can also reduce the risk of a window repair near me getting stuck and stop corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. Firstly the hinges, again due to wear and tear can become misaligned, this can cause a gap to form where the sash meets the frame. If they're beyond repair, it may be necessary to get them re-aligned. Second, the interlock can be misaligned. This is located on the hinge side and could require to be cleaned. In some cases it is possible to replace the hinges.

The next most common reason for draughts are the window seals, these are prone to wear or damaged over time, and allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures and decrease draughts.

One of the most effective ways to cut down on drafts is to use a draught excluder, these are typically made of fabric filled with some kind of filler. They can be placed on top of your windowsill. They will keep your home warm by blocking cold air.

With a bit of regular maintenance and repairs, your upvc windows will continue to provide a great level of insulation and security for your home. However, it is important to realize that all windows have a life span and eventually, they will reach an point at which it is more economical to replace them than repair them. If you are experiencing issues with your window made of upvc you should consult a professional as soon as possible.