• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They don't get rotten or rusty like timber and aluminum.

It is important to clean and oil UPVC doors and windows regularly. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, making it very hazardous and possibly fatal. It is essential to ensure that your windows are in good working order.

Single-pane windows are relatively simple to replace, and they typically fit into frames of the past easily. However when you have double pane windows that are anchored by internal beading it will be more difficult to remove the old panes and put in new ones. In this instance it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you are going attempt to remove the window panes by yourself, it is essential to wear the proper safety gear, including thick gloves and eye protection. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall on the fabric, not onto the floor, where they could be trampled.

It's a great idea cover the gap with tape after the glass is removed. This will stop drafts and water from entering your home until a professional arrives to fix the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the gap is large, you may think about an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

upvc window repair windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. Over time, they can develop a number of problems, including sliding. A sagging window can cause problems with light, draughts and even security. It's crucial to act as soon as you realize that your uPVC windows are falling down.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll need open the window to access the frame. With a screwdriver, you can unscrew the hinges at the top and bottom and window repairs adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close the window and check for an appropriate fit. If you're satisfied with the size of the window, you can tighten screws to secure them in place.

If you aren't able to move the hinges, you may require replacing the seal. Over time, rubber seals lose their elasticity and dry out which causes their tightness to decrease. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and secure from draughts.

UPVC handles can also become loose. This is typically caused by screws that have been removed over time, but it could also be due to the mechanism of the handle wearing out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. First, you'll need to close the window and perform an initial test to ensure that it fits. The corner joints of the sash must be aligned with the casing joint. If it doesn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you awake to damp floors and mouldy walls every time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. The most common cause for leaking uPVC windows is that the sealant around the frame has been damaged or missing.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the issue the caulking that was used up may require removal before a new layer can be applied. It is crucial to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area harder to clean and reduce your energy efficiency.

It is essential to ensure that any drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. The fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely the problem is with the seal rather than the frame. It is also possible to be corrected by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open with a breeze It could be hinges that are at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical part, hinges can be damaged over time. It's easy to replace a hinge on a window however it is simpler if you have someone to help you hold the frame.

Check that the uPVC hinges are closed and open in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The problem can be caused by opening the window incorrectly or a faulty installation in the factory. Sending us photos via our website is often enough to solve the issue. We are happy to give advice.

It is also essential to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the risk of a window sticking and help prevent corrosion. This is recommended to be done at least every year. WD40 or other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also become disaligned as a result of wear, creating gaps where the sash meets frame. If they are damaged beyond repair, it may be necessary to have them realigned. The interlock may also become unbalanced. This happens on the hinge's side, and could require to be cleaned. In certain instances it might be necessary to replace them.

The second most frequent reason for draughts is window seals. They are susceptible to being worn out or damaged over time, and let air escape through the gaps. Installing high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and will reduce draughts.

Another method of reducing the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security to your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows eventually wear out and it may be more cost-effective to replace them instead of fixing them. If you are having issues with your upvc windows, it is always recommended to seek help from a professional immediately.