• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It is easy to replace a broken window handle with the proper tools. It's important to know the type of handle you have and the spindle's size before you purchase an alternative.

Older uPVC window handles have a spur that protrudes and locks on a cockspur wedge striker. They can be left- or right-handed and must be matched when replacing.

What type of lock or handle do I have?

There are a variety of upvc window handles and locks, each with its distinct advantages and window handle replacement functions. The type of handle that you own will determine whether or not your locking mechanism is efficient and if it's easy to open the windows. As time passes, and with regular use, the upvc handles on your windows may become damaged and worn out. This makes them less secure and effective. In some instances they could even fall off completely. If you notice that your upvc window handles have fallen off, it is important to repair them as quickly as you can. This will help prevent burglaries, and keep your house safe.

It's a task that virtually anyone can perform. You'll require a few tools, but with the appropriate knowledge, it's an easy task that will only take a few minutes. You must be aware of the type of lock or Window Handle Replacement handle you have on your window replacement. This will help you choose the correct replacement.

Inline Espagnolette Handles

They are typically found on the outside of the window. They are flat and have an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles also have a spindle that goes through the middle of the handle and into the frame of the window to activate the latch.

Cockspur Handles

These handles are typically found on older uPVC windows and feature a distinctive hook-shaped design. Cockspur handles have one screw that is used to secure the handle to the window frame and are not as secure as other kinds of window handles.

Tilt and Turn Handles

The tilt and turn handles differ from other handles made of upvc in that they can be turned for opening the window, and then tilted to the window to let air circulate. They feature a 7mm spindle at the back and are available both in right and left-handed versions.

When you are purchasing replacement handles for upvc, it is important to verify the length of the spindle as not all are the same size. Drop something into the middle of the hole to test the length. This is the maximum spindle size that will fit your windows.

What is spindles?

uPVC window handles operate similarly like doors. By turning the handle, you can operate a latch within the frame. The latch opens the window, to allow it to be opened and closed. The handles can become damaged, especially if they're frequently used or subjected to harsh conditions. This could mean that you have to replace your uPVC handles on windows since they might not be able to operate the window correctly in the future.

There are many different types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. These handles are designed to fit in the uPVC frames in a variety of ways. Each handle utilizes a specific spindle to secure the mechanism to the window. It is important to identify the type of handle installed on your uPVC windows so that you can replace it with a suitable one.

The base section of the handle will tell you what type of uPVC it is. There should be a "snap in cover over one screw that holds the handle base in the correct position. Take it off and you should be able to see the second holding screw at the opposite end of the base section of the handle. After both screws are removed then you should be able to pull the handle from the uPVC.

Once you have removed the uPVC window handle, you will need to carefully remove the spindle you have removed from the locking mechanism. Take careful note of the length of the spindle, as you'll need to make sure that you buy an alternative that is the same length as the original handle and locking mechanism.

The spindle wears out and cannot operate the locking mechanism. This could be due damage from constant use, a loosening of the locking mechanism or even corrosion that occurs over time. If this happens, you'll need to replace both the window handle and locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I remove the old handle?

Through time and regular use, window handles may be damaged or destroyed, and if this happens it is important to repair them as soon as possible to ensure the safety of your home. It is good to know that replacing a damaged or worn handle is a relatively simple task that can be completed in just over a minute and doesn't require any specialist tools.

The first step to remove the handle that was previously used is to remove the screw that is located at the top of the handle base. Once the screw is removed, the handle can be pulled away. There is another screw located at the bottom of the handle's base and this can be removed too. Once these two screws have been removed, the handle can be removed from the base of the window.

After the handle has been removed, you can take the new handle and line up the fixing holes with the holes that are present in the window frame. There might be a small cap or sticker on the new handle, so take them off these if necessary and then put the handle in place. It is essential to ensure that the handle works once it is put in place. Turn the handle over and ensure that the lock mechanism is in place.

Espag handles have an extra spindle that is protruding from the handle and slot into a multipoint locking mechanism in the window frame. Cadenza windows feature a blade with cut-outs that slot into the lock mechanism, while Cockspur handles have a long nose that is able to hook over the frame's outer or transom bar cross-member in the window.

Once you have the new handle in place, insert the spindle into the lock in the window and then tighten it. Once the handle is firmly fixed in place and secured, replace the snap-in cover and screw cap (if appropriate). The handle is now ready for use by opening and closing the window a few times to make sure that it functions correctly and securely.

How do I fit the new handle?

Changing your uPVC window handle isn't difficult and the process is actually very simple. All you require is a screwdriver, and a little bit of patience. The first thing to do is make sure that the old handle is in the unlocked position and then remove any screws that are visible. you can also replace these by screw caps if you need. After removing the handle it is necessary to take an note of the length of the spindle that extends from the back of the handle. This is crucial as it will determine what kind of handle to purchase.

Espagnolette handles are the most commonly used type of handle for uPVC windows. They have a spindle which runs through the handle and operates a locking mechanism within the window frame. When the handle is turned, it releases the latch on the window, allowing it to open. When used regularly and over time, handles made of espagnolette can become damaged.

Cadenza handles are another type of uPVC window handle, which is typically used on tilt and turn windows. They have an extended blade that works a multipoint locking mechanism within the window. They are more secure than espagnolette handles because they are able to open from the inside. You can replace them with the same method that you would with espagnolette handles however, make sure that the new handle is angled, not flat.

After you have chosen the right handle, simply align the new handle to existing screw holes before screwing it in place. Then, you should put the screws on and test your new handle. You can do this by moving the handle between the locked position to the unlocked one a few time. If you have any issues, it may be beneficial to speak with a professional to see if they can help resolve the problem. They can provide advice on how to resolve the issue in a quick and effective manner.