• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to decay or rust as timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to take the time to ensure that you are doing everything you can to ensure that your windows are in good shape.

For single pane windows it is relatively easy to replace windows, and the new one is usually able to fit into the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this situation it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

If you plan to try to remove the window panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. It is also an excellent idea to lay down a dropcloth before you start working on the glass, so that any shards will fall on the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to block drafts and water from entering the home until a professional comes out and fix the window. It also acts as a barrier, preventing any intruders from gaining entry into your home. If the gap is particularly large, you might want to consider using a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. As time passes, they may develop a number of problems, including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from getting worse.

Repositioning the hinges can help fix a window that is sliding. First, you'll need to unblock the windows so you can get at the frame. After that, using the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and check for fit. If you're satisfied with the fit, tighten the screws to ensure that they stay in place.

If you are unable to reposition the hinges you may require replacing the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to lose tightness. It is crucial to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also become loose. The majority of the time it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need to shut the window and perform an initial fitting. The joints at the corners of the sash must align with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle and return the mechanism to its original position.

3. Water Leaks

If you wake up to wet floors and damp walls every time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and impact your ability to regulate the temperature of your home. The most common reason for leaks in uPVC windows is that the sealant around the frame has been damaged or not present.

This is a relatively easy fix that can be done by any skilled DIYer. Depending on how serious the issue is, upvc window repairs old caulking may need to be removed. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and reduce your energy efficiency.

Check that any drainage holes do not have debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window doctor near me. In more extreme instances, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. The fungus thrives in damp conditions and can quickly spread across the home.

It is also important to keep in mind that if the leakage is coming from between the glass of your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sagging. Again this can easily be repaired by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with ease it could be hinges that are at the fault. They can be easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Like any mechanical part, hinges can be damaged over time. It's very simple to replace a hinge on a window but it's much simpler if you have someone to help hold the frame.

Check that the uPVC hinges are open and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The problem can be caused by opening the window incorrectly or a faulty installation in the factory. Sending us photos via our website is often enough to solve the issue. We are happy to offer advice.

Regular lubrication of the hinges is essential. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to open and close more easily. It can also prevent corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. The hinges may also become misaligned due to wear, creating a gap between the frame and sash. If they're beyond repair, it could be necessary to get them re-aligned. The second is the interlock, which is located on the hinge side of the window, can also become misaligned, again it may be feasible to give them a good clean, but in some cases it might be necessary to have these replaced.

The seals may wear out or get damaged over time, allowing air to escape. Installing high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will reduce the possibility of draughts.

Another, and most effective ways to cut down on draughts is by using a draught excluder. These are usually fabric tubes which are filled with a sort of filler and can be positioned on the windowsill on top. They can help block out cold air and keep your home warm and cozy!

With a bit of regular maintenance and repair windows made of upvc will provide a great level of insulation and security for your home. However, it is important to realize that all windows have a lifespan and there may come the point when it's more economical to replace them than fix them. So, if you're experiencing issues with your Upvc windows, it is recommended to seek assistance from a professional immediately.