• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sash Window Repair

Sash windows may become out of balance, or even break. Pam searches the internet for salvaged, wavy glass and is always looking for scraps of sash weights made of metal. She then looks for replacements, like nuts or washers, to balance her window.

Pam covers each pan with a rope of glazing compound she uses to create the rabbet groove, also known as a pocket, around the opening. This helps cut drafts and prevent costly heat loss.

Sticking Sashes

When your double-hung window gets stuck and shatters, it's a nightmare. They'll shake during an icy storm and you'll lose your view. A window that is too loose can let air and noise in, which will increase your energy costs. This is neither optimal, but both can be solved with the right tools and a little determination.

Paint can accumulate on the channels of old weighted window tracks, causing them to become jammed. The majority of these issues can be solved by cleaning and oiling the tracks.

Begin by removing the old caulking that was between the window stop (the internal one) and the window frame. Then scrape away any paint that's built up. Make use of a sharp knife, and put plastic sheets and an air-collecting vacuum cleaner beneath the surface to collect any paint dust or chips.

You can then clean the tracks using a dry cloth, then apply an oil based on silicone to help them slide better. This lubricant is available at many home improvement stores or on the internet. You can test it by moving the sash upwards or downwards.

If it continues to stop the sash cable could be defective. Examine the sash cord to determine if the cord is catching or hanging from the sash, or if it has snapped completely. If this is the situation, you'll need to reconnect the window.

A pin that keeps the rail in place might have fallen out. This can be tricky to fix, and you'll need to contact an expert in the majority of cases.

If a pin doesn't fall out but the wood has become warped or swollen it's a good idea to use a wood softener on it. It's a quick drying liquid that can help restore damaged wood, so you'll be able to fix your sash window without having to remove it completely. After using it, you can pull off the two sashes by placing a piece wood in the bottom corner of the window where they meet.

Draughts

Draughts can be a concern when you have an old sash window, especially during the winter. They are usually caused by rotten wood, cracked putty, or worn sash cords. This can allow cold air to get inside the window, making it more difficult to heat your home. There are a few options you can take to stop draughts from coming through your sash windows, Window doctor such as filling any gaps with foam that expands or strips to block draughts that you can purchase at many hardware stores. These are effective, but they will need to replace them periodically because the foam expands with use.

A alternative that is more durable is Gapseal, which is a spongy rubbbery seal that you cut to the desired size and then push into the gaps between the window frames of your sash. It can be used on its own or with adhesive strips at the top and bottom. This option is fairly expensive and will have to be applied over the course of your windows' lifetime but it does offer an option for Window Doctor the long term and is simple to remove when you wish to open the window.

Another popular DIY method of draughtproofing is to use cling film that is scrunched up and put into every gap around your window. This is a good draught-stopper however, it could also hinder the sash's movement and even cause a fire. Furthermore the sash needs to be removed for you to open the window again and the cling film will need to be applied every time you close the sash.

An alternative that is less expensive is to have your window sash professionally draughtproofed as part of a complete refurbishment service. This can include new sash cords and staff beads, parting beads, lubrication of the pulley wheels and rebalancing the weights, and staining or painting the frames and sashes. This can aid in restoring the sash's function and improve its energy efficiency, while also addressing any minor timber defects. It is much less disruptive than replacing windows completely and will dramatically reduce draughts and improve your home's thermal efficiency.

Decay

If your windows with sash have suffered damage or decay the good news is that they are not necessarily beyond repair. The frames of these windows are typically made of high-quality timber. With the proper restoration, they can be restored to ensure high performance for a long time. Regular inspections are key and so is making sure the wood is adequately ventilated. This will prevent moisture build-up that can cause wood rot.

The majority of problems with sash Window doctor are easily apparent, however some are more difficult to spot. Wood decay is a challenge to treat, since the fungus consumes the wood. While it is possible to upvc repair rotten timber but the best way to avoid further rot is by keeping the timber dry.

First, take off any paint from the hardware. It is possible to remove the bottom rail from the frame, and also the meeting rail (this will depend on the location of the sash). The next step is to remove the "pocket covers" that are pieces of wood on the side of the frame lower down that provide access to the weights (the parting beads run through the middle of them). These are often fixed by nailing them in place and then securing them with paint, so you'll likely require a knife to get them out of the way. Once the pockets are removed you can begin to remove any wood rot, and apply a good quality water-resistant wood filler. Once the filler is dry the primer coat must be applied to prevent further decay.

It is a good idea to check the sash weights inside the window, too, to ensure that they are balanced and not swaying one side more than the other. The sash could be thrown off its track if they aren't properly balanced. This could cause the frame to crack or become damaged. The sash's weights can be replaced with new ones or a new mechanism for balancing can be installed that will stop the sashes from swinging towards the opposite side of the window frame.

Poor Security

Sash windows are vulnerable to wear and damage from the weather over time. In time, this may result in wood decay that is then required to be replaced - costly repair that needs to be addressed as soon as possible. Water marks on the window or a frame that is soft can indicate wood decay. It is important to consult a professional to assess the situation, and determine if sash window repairs are necessary.

Additionally, with time, the rails at the bottom may become damaged. This is evident by the presence of water marks on the sill or by the window becoming soft. A professional consultation may be required to assess the situation and recommend any needed replacement or resealing of sash window components.

It is a major concern when triple or double glazing windows begin to let noise pollution back into the house. If this is happening, the structural integrity of the windows' sash could be at risk, and they will most likely require to be replaced by a different option.

A typical sash window repair problem is when the sash gets stuck in the frame. This could be due to an sash cord that has snapped or it could be an indication of an issue with the sash's the ratchets. If the problem is related to the sash the ratchets, some gentle pressure is usually enough.

The sash should be removed from the frame and removing the tracks of dirt or dust can aid in resolving this problem. After the tracks have been cleaned take off any security fittings that could be present. Lastly, carefully removing the sash cords and chains will allow the sash to be removed. A draught seal can then be placed around the staff bead in order to reduce the appearance of the paint finish. The gap between the box and sash could be filled with decorators caulk in order to improve the operation of the sash and lessen draughts.