• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It's easy to repair a damaged window handle using the appropriate tools. It is essential to identify the kind of handle you have as well as the size of its spindle before you purchase a replacement.

Older uPVC window handles have a spur that protrudes and locks over a cockspur wedge striker. These can be either left or right-handed and must be to match when replacing.

What kind of lock and handle do I have?

There are a variety of window locks and handles made from upvc each with their particular advantages and uses. The kind of handle you choose will determine the ease to open your windows and whether or not the locking mechanism works in the way you want it to. As time passes and window handle replacement with regular usage, the window handles made of upvc can become damaged or worn out, making them less effective and secure. In certain instances, they might even fall completely off. It is crucial to fix your upvc window handles immediately if you notice they are falling off. This will help stop potential burglaries and keep your home safe.

It's a simple job that anyone can complete. You'll need some basic tools, but with right knowledge, it is a straightforward process that should only take a few minutes. You will need to know the kind of lock or handle you have on your window. This will allow you to choose the correct replacement.

Inline Espagnolette Handles

They are usually found on the outside of the window. They have a flat design and have a latch that connects to the locking mechanism on the window pane replacement frame when turned. Inline upvc handles have a spindle that goes through the center of the handle, and into the window frame to operate the latch.

Cockspur Handles

These handles are typically found on older uPVC windows and feature a distinctive hook-shaped design. Cockspur handles are attached to the frame of the window by one screw, and are less secure than other varieties of window handles.

Handles that tilt and turn

The tilt and turn handles differ from other upvc handles because they can be turned to open the window and then tilted into the window to allow air circulation. In general, they have a 7mm spindle at the back of the handle. They are available in both left and right-handed versions.

When purchasing replacement handles made of upvc it is essential to verify the length of the spindle as not all are the same size. Drop something in the middle of the hole to measure the length. This is the maximum spindle size that will fit into your windows.

What is spindles?

uPVC window handles function in a similar way to doors, by turning the handle to open a latch inside the frame. This unlocks the window so it can be shut and opened. But, at times, handles can be damaged, especially if they are regularly used or exposed to harsh weather conditions. This can lead to the need to replace your uPVC handles on windows since they may not operate the window in a proper manner in the future.

There are many different types of uPVC handles, including Espag, Cockspur, and Spaded handles. They are made in a variety of ways to fit into uPVC frames. Each handle type uses an entirely different spindle for locking the window mechanism. It is crucial to know the kind of handle that is installed on your uPVC windows so that you can replace it with the right one.

The base section of the handle will inform you what kind of uPVC it is. There should be a'snap in cover' over one screw that holds the handle's base in the correct position. Once you remove this you will be able to see the screw that holds the base of the handle in place. After both screws have been removed and you are able to pull the handle from the uPVC.

After removing the uPVC handle, carefully unscrew it from the locking mechanism. Take careful note of the length of the spindle, as you'll need to ensure that you purchase an alternative that is the same length as your original handle and locking mechanism.

The main issue with most window handle problems with uPVC is that the spindle gets worn out and can no longer work with the locking mechanism. This can be caused by corrosion, damage due to constant use or a loosening locking mechanism. If this happens, you will have to replace both the window handle and the locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I get rid of the handle from the previous one?

Window handles are susceptible to being damaged or destroyed over time. It is essential to fix them as soon a possible to ensure your security. It is simple to replace a worn or damaged handle. The task can be completed in less than an hour without the need for any special tools.

The first step to remove the handle that was previously used is to take off the screw situated at the top of the base of the handle. After this screw is removed, the handle will be pulled away from the base. A second screw will be located at the base of the handle. This can also be removed. After these two screws have been removed, the handle will be removed from the base of the window.

After removing the handle and fixing holes, align the holes of the new handle with the holes that are already in the window frame. If there is a cap or sticker on the new handle, remove it if needed and screw the handle in place. It is essential to ensure whether the handle functions after it is put in place. Turn the handle around and ensure that the lock mechanism is working.

Espag handles come with an elongated spindle that extends from the handle and slot into a multipoint locking mechanism within the window frame. Cadenza windows feature a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and hook over the frame of the window or the transom crossmember of the bar.

Once you have the new handle in place, slide the spindle inside the window lock and then tighten it. Replace the snap-in cover and screw cap (if applicable) once the handle is securely fixed. The handle is now ready to use, so try opening and closing the window a few times to check that it is working properly and securely.

How do I install the new handle?

The process of changing your window handle made of uPVC isn't a big deal and the process is actually very simple. All you need is a screwdriver and a bit of patience. The first thing to do is to ensure that the handle you have previously used is not locked and then remove any screws that are visible, you can also replace these with screw caps if required. Once the handle is removed, you need to make a note of the length of the spindle that extends from the back of the handle. This is crucial since it will determine the type of handle you'll require to purchase.

Espagnolette handles are the most common type of handle for uPVC windows. The spindle is inserted into the handle to control the locking mechanism inside the frame of the window. When the handle is turned it releases the latch on the window and allows it to open. During regular use and time, espagnolette handles may be damaged.

Cadenza handles are a kind of uPVC handle that is typically used with tilt and turn windows. They have an elongated blade that functions as an interlocking mechanism that is multipoint within the window. They are more secure than an espagnolette handles since they only open from the inside. They can be replaced by the same procedure as espagnolette handles however you will need to ensure that the new handle has a curved blade, as opposed to one that is flat.

After you have picked the right handle, simply align the new handle with the existing screw holes prior to screwing it into place. Then, put the screws back on and test that the new handle functions correctly. This is accomplished by moving the handle from locked position to the unlocked and the reverse direction a few times. It is possible to contact an expert to see whether you can solve any issues. They will often be able to guide you on the best way to resolve the issue in a fast and efficient way.