• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Secures your vehicle from key cloning and stops thieves from driving the vehicle using original keys. Our latest immobiliser is connected to the CAN data network of your vehicle and a unique PIN must be entered to begin the engine.

In contrast to trackers, Ghost does not transmit radio frequency signals and can't be detected by diagnostic tools. Also, it doesn't have any LED indicators or buttons giving away its presence within your vehicle or van.

Anti-key cloning

The Ghost immobiliser was developed to prevent key cloning. This device connects to the CAN data network of your vehicle and creates an unique pin code push sequence by using the factory buttons on your dashboard as well as the steering wheel. This stops the criminal from being able to start your vehicle. If the wrong PIN is entered, it will stop the engine from starting and making it impossible for you to drive away with your joy and pride.

A ghost immobiliser is a new technology that is extremely hard for thieves to defeat. The ghost immobiliser, unlike physical deterrents like wheel locks and steering locks that can be cut, is a discrete electronic device. It isn't detected by thieves because it doesn't emit radio signals and functions in a quiet manner.

The next generation of immobilisers are equipped to shield your car from a variety of threats, including keys that are duplicated, key-hacking, and even relay attacks. It also stops the thief from adding a key or replacing your ECU as it won't allow them to start the car without first entering the correct PIN code.

The ghost immobiliser 2 unlike other immobilisers does not require the use of a remote control or key fob to operate. It can be turned off from the driver's phone using a simple app. This is ideal when you have to hand your car to valet parking, or for maintenance without key fobs.

The autowatch ghost immobiliser cost Ghost-II represents the latest version of the Ghost immobiliser. It is designed to make it as simple and easy to use and yet be as secure as is possible. This is achieved by integrating the Ghost-II into the vehicle's data network CAN, meaning that there are no wires to hide or be easily located. It comes with a built-in feature which allows users to disable the Ghost-II simply by connecting it to your vehicle's Bluetooth.

OBD port hacking

OBD port hacking has become the most recent method employed by professional car thieves. Thieves have access to your vehicle's OBD by using an laptop, mobile application, and a few cables that are available on the internet for less than PS50. Once they have access to your vehicle's OBD port, they are able to do whatever they want from changing fault codes and tuning your car to taking your joy and pride away in under a minute.

If you have an Ghost immobiliser fitted it can stop your car being stolen with this method by making sure that an unique PIN code sequence is entered alongside the fob of your key in order to start the engine and then drive away. It does this by communicating with the vehicles ECU (Engine Control Unit) on the CAN Data circuit and is indetectable to any scan or code grabbing technology. It also has a Service/Valet mode which will allow your vehicle to be started without the need for a PIN.

To utilize an OBD hacking device you need to have a laptop that has software capable of reading the OBD protocol. This can be purchased for under PS100 on ebay or Amazon. You'll also require an OBD cable that has OBD pins that are connected to the CAN bus, these are available on eBay and Amazon for about PS50. Then, you need to splice the cable into the wire harness of your car, for example, in the radio wiring harness.

Once the hacker has established a connection to your vehicle's OBD port, they can send diagnostics requests to the system at a high baud rate that can crash the CAN and stop systems inside your car from working. This can cause the engine to stop and doors to lock, or even the brakes to activate.

No need to purchase additional remotes or key fobs

An immobiliser for your car is a great piece of anti theft technology used by billions of modern cars around the world. An aftermarket immobiliser helps protect your vehicle with engine ECU software that stops cars from starting when an untrue transponder signal is sent.

However, it can be easy for thieves to bypass an immobiliser system in the event that they have access the code to deactivate it. The batteries in the majority of key fobs can be easily removed by prying it open, so a thief can make use of a simple tool to remove the immobiliser's inner circuit board and replace it with the blank. Then, they'll be able to start your car.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes required. The immobiliser communicates directly with the vehicle's ECU (Engine Control Unit). This is accomplished through a discrete, silent data loop in CAN that cannot be detected by diagnostic tools like those used by high-tech thieves. It also doesn't utilize a traditional key fob with LED indicators, which means it's not visible at a glance.

There will be instances that you must deactivate autowatch ghost installers birmingham Ghost 2's auto-protection for instance, during the valet parking or service work. The ghost ii immobiliser CAN immobiliser has a special mode for this, referred to as 'Service Mode that is activated by a push of the button on your phone. The car is still operational, but the maximum speed is limited to 36mph.

If you'd like to know more about the TASSA certified ghost immobiliser, call us today to book a demonstration in our workshop. A member of our team will explain the process and will give you a Ghost 2 emergency card, installation certificate, and security guarantee.

Simple Change of PIN Code

Ghost is a next-generation device that protects your vehicle without cutting wires or installing aftermarket key fobs. It connects directly to the vehicle's CAN data network. A personal PIN can be set by pressing buttons on the dash and steering wheel. The device does not emit RF signals, which means it is unable to be manipulated. This makes it unrecognisable by sophisticated scans using RF or code-grabbing techniques that modern thieves employ.

The PIN code sequence can be changed anytime you want to lock out previous drivers and even includes an override code in the event of a sequence that is not remembered. During installation the installer will show how to do this. The system also comes with a valet mode feature which can be used to temporarily disable the pin input sequence so that your mechanic or garage can repair the car without needing to know the code. This is great for customers who want to give their car for valet parking or service but don't want divulge the PIN sequence.

Unlike Thatcham products that require additional key-fobs to operate, ghost 2 immobiliser problems - see here now, is a discreet system that uses the buttons inside your vehicle to create a unique and interchangeable PIN code sequence. This sequence is entered via the smartphone application. There are no additional LED indicators are used, and your car is protected without chance of being disabled.

Tested for each vehicle

A ghost immobiliser, in contrast to key fobs which require pressing buttons, is discretely installed under the steering wheel or dash. Only you will know it's there. The device is connected to the CAN network of your vehicle and a PIN number can be programmed using the buttons on your vehicle. The system stops your engine from running until the code is entered prior to. This means that thieves are unable to duplicate your keys or access the OBD port to hack into your vehicle.

ghost alarm installation is a great option for all vehicles, including electric cars motorhomes, vans, motorhomes and bikes. It's also extremely versatile and can be programmed to turn off in a variety of situations. For instance, it can be programmed to enter Valet mode when the car is taken to a valet parking or a service provider. This means that your vehicle can be operated within a set 30mph speed limit. The ghost immobiliser will be activated once it is returned to your possession.

The device can also be reset at anytime to your personal PIN number. This is great if you lose the code, or when the device ceases to function.

It's also worth noting that the device is completely inaccessible to those who aren't familiar with it. This is due to it running through the buttons on your car's dashboard and steering wheel, and uses the data they send to recognise the button that was activated. This makes it a secure and reliable security system that cannot be altered by RF scanning or jamming, or even a door lock pick set.