• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to rot or rust like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, making it very hazardous and possibly fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace and will usually fit into the frames that were previously in use very easily. If you have double glazing windows repair-paned windows which are held together by internal beading, it is difficult to remove and replace the old panes. In this instance, you will need to source some plastic spacers that will help the new pane to fit correctly into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass by yourself. It is also a good idea to lay down a drop cloth before you start working on the glass to ensure that any shards will fall onto the fabric instead of landing on the floor where they could be trampled on and cause further damage.

Once the glass has been removed from the window, it's best to seal the gap with packaging tape or duct tape to stop water and drafts from entering the property until a professional can come out and fix the window. This will also act as a barrier, preventing any intruders to gain access to your home. If the gap is large, you may want to consider using a security door that has an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. However, over time they can suffer from a variety of issues, including sliding. A sagging window in uPVC can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from getting worse.

Repositioning the hinges could help fix a window that is sliding. To do this, you'll need open the window so that you can access the frame. Then, using an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having relocated your hinges. If you're happy with the fit, tighten the screws until they stay in place.

If you are unable to reposition the hinges, you might require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to lose their tightness. If this happens, Repairs to uPVC Windows it's essential to replace the seal as soon as you can to ensure that your uPVC windows are watertight and draught-proof.

uPVC handles may also become loose. This is typically caused by screws that have been removed over time, but it can also be due to the mechanism of the handle wears out. It's fairly simple to fix a loose uPVC handle. First, you'll need to close your window and do an initial test to ensure that it fits. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

It is essential to act if you awake each day to discover mouldy walls and wet floors. The leaks of water from windows do not only lead to the degrading of the structure of your home but also hinder your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix and should be undertaken by any skilled DIYer. Based on the severity of the problem the caulking that was used up might need to be removed before a new layer can be put on. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area more difficult to clean and could reduce your energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and can quickly spread across the house.

It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or it blows open with an ease. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. It is very easy to replace a hinge on a window but it's much simpler if you have someone to help hold the frame.

Check that the uPVC hinges open and close in the correct direction. This can be done by checking for the arrows on each hinge, this indicates the direction in which the window should be opened.

The issue can be caused either by opening the window incorrectly or by a poor installation in the factory. Sending us photos through our website can often solve the issue. We are happy to give suggestions.

It is also essential to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the possibility of a window sticking and prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges may also become disaligned as a result of wear, causing an opening where the sash meets frame. These can be easily fixed by giving them a thorough clean, however when they're beyond repair, it might be necessary to get them realigned or replaced. Second, the interlock can also become disaligned. This happens on the hinge's side, and might require to be cleaned. In certain instances, it may be necessary to replace these.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures, and reduce the risk of draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. These will help to block out cold air and keep your home warm and cozy!

With a little maintenance and repairs windows made of upvc will continue to provide excellent security and insulation for your home. It is essential to remember that all windows eventually get worn out and it is more cost-effective to replace them instead of fixing them. So, if you're experiencing issues with your Upvc windows, it's best to seek professional assistance immediately.