• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, making it extremely dangerous and possibly fatal. You should take the time to ensure that your windows are in good working order.

For single pane windows, it can be relatively simple to replace them, and the replacement will generally fit within the old frame very easily. However If you have double-pane windows that are anchored by internal beading it will be more difficult to get rid of the old panes and put in new ones. In this situation it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass, so that any shards fall onto the cloth instead of onto the floor, where they could be trampled upon and cause further damage.

It's a good idea to cover the gap with tape after the glass is removed. This will prevent water and drafts from entering your property until a professional comes out to repair the window. This will also act as a barrier, deterring any intruders from gaining entry to your home. If the gap is particularly large, you might be interested in an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, with time, they may be afflicted by a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. It's important to take action immediately if you realize that your uPVC windows are falling down.

To fix a window that is sagging you can try repositioning the hinges. You'll first need to open the windows to reach the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after having repositioned your hinges. If you are happy with the size of the window, tighten the screws to keep them in the right position.

If you are unable to move the hinges, you may have to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's essential to replace the seal as fast as possible to ensure your upvc door repairs near me windows remain watertight and safe from drafts.

uPVC handles may also become loose. This is often caused by screws that have been removed over time, but it can also be due to the handle mechanism getting worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the window and perform an initial test to ensure that it fits. The corner joints of the sash need to be aligned with the casing joint. If it isn't, you can use a screwdriver to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

It is essential to act if you wake up every morning to discover mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature of your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is either damaged or not present.

This is an easy fix that can be done by any DIYer who is competent. Depending on how serious the issue is, upvc Door repairs near Me the old caulking may have to be removed. It is essential to keep in mind that when it comes to uPVC window repair near me repairs, do avoid the temptation to "over-caulk and then make the area harder to clean and could reduce your energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to note that if the leak originates from the glass in your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. This can be easily repaired by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with ease It could be hinges that are at the fault. They can be replaced by any competent DIYer and can be completed in just a few minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that are hinged and, just like any mechanical component they will wear out over time. It is an easy process, but it's easier to do if you have someone to help hold the frame in place.

Make sure that the uPVC hinges are closed and open in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused due to opening the window in the wrong way or due to a poor installation in the factory. This can often be resolved by sending us a photo through our website and we will be pleased to offer you advice.

Regular lubrication of the hinges is essential. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It also decreases the chance of windows sticking and help prevent corrosion. This is recommended to be done at least once a year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different factors. The hinges can also become unbalanced due to wear, causing an opening where the sash and frame meet. These can be easily repaired by giving them a thorough clean, however in the event that they are beyond repair it may be necessary to have them re-aligned or replaced. Second, the interlock can be misaligned. This happens on the hinge's side, and may need to be cleaned. In certain instances it might be necessary to replace the hinges.

These seals can wear down or become damaged over time, allowing air escape. Installing high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of Upvc with low-emissivity lenses. This will help regulate indoor temperatures and decrease the risk of draughts.

Lastly, one of the most effective ways to reduce drafts is to use a draught excluder, these are usually fabric tubes that are filled with some sort of filler and can be placed on the top of your windowsill. They will help block out cold air and keep your home warm and cozy!

The windows made of upvc can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is important to remember that all windows eventually become worn out, and it is cheaper to replace them instead of fixing them. If you are experiencing issues with your upvc window, it's best to consult a professional as soon as you can.