• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not get rusty or decay.

It is essential to clean and oil UPVC doors and windows regularly. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window repairs is broken it could cause a large deal of damage to your home, making it extremely dangerous and possibly fatal. It is crucial to take the time to make sure that you are doing everything you can to keep your windows in good shape.

For single pane windows it is fairly easy to replace them, and the replacement will usually fit inside the frame that was previously installed easily. However, if windows with double panes are anchored by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this case you'll need find some plastic spacers that will assist the new pane to fit perfectly into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass so that any shards fall onto the fabric rather than on the floor, where they could be trampled on and cause further damage.

It's a great idea to seal the gap after the glass is removed. This will stop water and drafts from entering your property until a professional is able to repair the window. It also acts as a barrier that will prevent any intruders from gaining entry into your home. If the gap is particularly large, you might want to consider using a security door that has an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. However, with time, they may be afflicted by a variety of issues like sagging. A sagging window repair near me in uPVC can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from getting worse.

Repositioning the hinges can aid in fixing a window that is sliding. First, you'll need to open the windows so you can get at the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the size of the window, tighten the screws to secure them in the right position.

If you cannot reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows are watertight and secure from draughts.

UPVC handles can also become loose. This is often caused by screws that have been removed over time, but it could be caused by the handle mechanism getting worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close the window and do an initial fitting. The corners of the sash need to align with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

It is essential to take action if get up each morning to find a smoky wall and wet floors. Windows that leak water do not only lead to the destruction of your home's structure but also undermine your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on how severe the issue is, old caulking may need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and could reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious instances, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the home.

It is also important to keep in mind that if the leakage originates from the glass of your double-glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. This can be easily fixed by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open with a breeze it could be hinges at fault. These are easily repaired by any skilled DIYer and can be completed in just a few minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. Changing a window hinge is essentially a simple process but it can be easier to do when you have a person to help hold the frame in place.

Check that the uPVC hinges are open and closed in the proper direction. You can do this by checking for the arrows on each hinge. This indicates which way the window should be opened.

The problem can be caused due to opening the window in the wrong way or by a poor installation in the factory. Sending us photos via our website will often resolve the problem. We are more than happy to offer assistance.

Regular lubrication of the hinges is essential. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window operate and close more easily. It can also prevent corrosion and decrease the chance of sticking. It is recommended to perform this every year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by various factors. The hinges can also be unbalanced due to wear, creating a gap where the sash meets frame. This can be easily fixed by giving them a good cleaning, but when they're beyond repair, it could be necessary to get them realigned or replaced. The interlock, which is on the hinge side of the window, can also become misaligned, again it is possible to give them a clean but in certain cases, it may be necessary to get them replaced.

The next most common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping can help prevent draughts. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and again will lessen draughts.

The final method to cut down on draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler which can be hung over your window sill. They will keep your home warm by blocking cold air.

The windows made of upvc can remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it is cheaper to replace them instead of fixing them. If you are having issues with your upvc windows, it is always recommended to seek assistance from a professional as soon as possible.