• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft with the Ghost Immobiliser. This system is discrete and does not require any additional key fobs in order to operate.

The device uses existing buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique pin code sequence up to 20 presses long. This allows your vehicle to start.

Simple change of PIN code

Many owners are upgrading their security due to the increase in vehicle theft. There are many types of security products that are available from tracking systems to alarms and immobilisers. However there are a few that are equally efficient in protecting your vehicle. While a tracking system can help you find your vehicle in the case of theft, it will not stop the crime from happening in the first place. An immobiliser, on contrary, does exactly what it says on the tin: it shuts down the engine of your car so that it is unable to be started. The Autowatch Ghost is one of the most sophisticated options available, making it virtually impossible for thieves steal your car.

Utilizing the buttons already in your car The ghost device is able to create an unique sequence that must be entered prior to the engine starts. This can be done by using the window, heater or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver how to install a ghost immobiliser operate their vehicle without having to use the button sequence. This is a great solution when you wish to donate your car to valet parking or maintenance. The immobiliser remains active.

The Ghost is an innovative and unique device that works by using your vehicle's buttons rather than as a separate unit. It is not only an effective deterrent for vehicle theft however, it can be used to secure any future vehicles you own. This makes it a far better investment than a conventional wheel lock.

Small, weatherproof device

The Autowatch Ghost Immobiliser is an advanced security device that shields your vehicle from key cloning and hacking. It also blocks ECU swapping. It's a small weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without the need for additional wiring, and has been thoroughly tested to make sure it works with all vehicles. It also is resistant to jamming devices which is a common technique used by car thieves to circumvent existing immobilisers.

The benefit of using CAN data is that it operates silently in comparison to conventional systems. It is not able to be detected by sophisticated RF scanning and code-grabbing technologies and cannot be identified by conventional diagnostic tools. The autowatch ghost immobiliser cost Ghost does not employ LED indicators, but instead uses buttons in your vehicle, such as the steering wheel, the centre console, or door panels, to create a unique sequences for disarming. This sequence can be extended to up to 20 presses to provide additional security. The iPhone app lets you make one, authorized connection using the pairing code unique to the Ghost and the communication between the two is secured.

The Ghost will stop car thieves from putting in an ignition key that is not in use or replacing the ECU to bypass the immobiliser. The engine can only be started if a valid PIN code has been entered. It can be temporarily operated in the Valet/Service mode (with parameters set, such as 30mph speed limit) which means you can hand your car to a valet or service without entering an entry code.

Each vehicle is tested

The autowatch ghost 2 installers near me Ghost is the world's first aftermarket CAN bus immobiliser that is able to be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device snoops on electronic signals to block the system of your vehicle from running its normal start-up routine until you input the passcode you have created. The system can be turned off or on by using your smartphone app, without the need for extra wires.

Standard factory immobilisers for automobiles function through an electronic transponder in the key, which sends a signal to the ECU. If the correct code is sent the car will begin, but if a transponder is replaced with one from another vehicle the immobiliser cannot recognize it. This makes it possible for the vehicle to be started and stolen. The Ghost immobiliser was developed by an South African company at the top of the line in vehicle security technology. It guards you against key cloning or hacking, and even key theft. Only by physically towing your car away from thieves could they steal it, and they would still not be able to drive the vehicle.

Ghost makes use of buttons in your vehicle, including the indicator stalk, steering wheel, and the door panels, to create an individual PIN code that must be entered in order to use your car. This is done without any additional hardware, like key fobs. It can take up 20 to 20 presses. It is also inaccessible to diagnostic equipment and does transmit radio frequency signals, meaning thieves cannot use sophisticated RF scanners or code grabbing technologies to identify that a system has been installed.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks Ghost is concealed within the vehicle so it can't be removed or disabled by thieves and is even more difficult to get rid of than a car alarm that requires disarming via an action sequence. This makes it a great supplement to a GPS tracker, which can help locate your car after it has been stolen.

Override of emergency PIN code

You don't have to look very long on social media sites to find stories or videos of cars that were stolen using the most advanced technology tools. This includes key-cloning and hacking devices that allow them to start your vehicle without the original key fobs.

The Ghost immobiliser has been designed to combat this, and give you an extra layer of security in order to prevent your vehicle from being targeted by thieves. It works by creating an individual pin code push sequence using your existing buttons on the steering wheel, door panel and the center console. The unique pin code must be entered along with your original key fob in order to stop the vehicle from getting started. The unique override PIN can be found on the black card that you will receive following installation. It's easy to remember as there aren't any LEDs.

The device is hidden within the vehicle's wiring and does not emit radio signals. This means it can't be detected using diagnostic software that can tell the type of security system you have installed. This makes it an excellent alternative to a tracking device.

In contrast to other security systems that use an engine relay bay, these CANBUS Immobilisers connect with the car's ECU and BCM via the CAN data bus (brand dependent). This allows them to disable the vehicle completely with an electronic block of commands that is sent to both the ECU and the engine.

These systems can also be linked to a separate analogue alarm immobiliser, tracker or alarm. This must be specified prior to installation. They are also fully service/valet mode compatible and are a great alternative to a tracker if you are you are taking your car in for repair at the dealer.

Service/Valet mode

In recent times, there has been an increase in vehicles being stolen with the owners' keys. With easy access to key cloning equipment and door lock pick sets, it is now much easier for thieves to take your prized possessions. To combat this we now offer the Autowatch Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys have been cloned or your car was stolen.

It directly communicates with your car's ECU (Engine Control Unit), via the data loop called CAN. It's completely silent since it doesn't use radio frequencies or key fobs. This means that it can't be detected by diagnostics or other vehicle hacking devices. It also prevents you from adding an ECU or key to bypass the system, because only the PIN number allows the engine to start.

The device is hidden inside your car, using buttons on the steering wheel, the centre console and door panels. Before you can start your car, you must enter a unique and changeable PIN code up to 20 digits.

This is the first aftermarket CAN bus immobiliser to be designed to stop your car from being started or driven away in the event that a PIN code hasn't been entered prior to. If you are driving away with the device in motion, an indicator will appear on your dashboard and flash continuously for about 300m. Entering your PIN code will deactivate the anti-hijack. Your vehicle will continue to operate normally. If you do not enter your PIN code at this point, the warning will continue to flash and require a new PIN code for every attempt to start your car.