• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they don't get rusty or decay.

It is crucial to wash and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is crucial to take the time to make sure that you are doing everything you can to keep your windows in good repair.

Single-pane windows are fairly simple to replace and typically fit into old frames very easily. If you have repairing double glazed windows-paned windows which are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this instance you'll need locate some plastic spacers to assist the new pane to fit correctly into the frame of the window.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor, where they could be trampled.

Once the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and fix the window. It also acts as a barrier that will prevent any intruders from gaining entry into your home. If the distance between the window and the door is substantial, you may want to use security screens that has an opening. This will give you the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. In time, they could be affected by a variety of issues such as sagging. A sagging window in uPVC can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from becoming worse.

Repositioning the hinges could help fix a window that is sliding. To do this, you'll need open the window to access the frame. Then, using the screwdriver, you'll be able to take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you're satisfied with the fit, tighten the screws to ensure that they remain in position.

If you are unable to reposition the hinges, you might have to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes their tightness to decrease. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows are waterproof and draught-proof.

uPVC handles can also loosen up. This is often caused by screws that have loosened over time, but it could also be due to the handle mechanism getting worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need close your window and do a test to ensure that it fits. The corner joints of the sash must be aligned with the casing joint. If it doesn't you can use a screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

It is essential to take action if you get up each morning to find a smoky wall and floors that are wet. The leaks of water from windows do can not only cause degradation of your home's structure but also undermine your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix that can be completed by any competent DIYer. Depending on how serious the issue is, old caulking may need to be removed. When it is time to uPVC repair, it is important to avoid over-caulking. This will only make your window more difficult to clean and lower its energy efficiency.

Check that any drainage holes are free of debris in them, and also that the sill pan is angled correctly to drain away from the window. In more extreme instances, you may need to replace the window.

Moldy sills and Repairs to uPVC Windows rotten ones are another sign of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely the issue is related to the seal, not the frame. It is also possible to be corrected by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open with a breeze it could be hinges that are at the fault. They can be easily replaced by any competent DIYer and are usually completed in just a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It is essentially a very simple procedure, but it is simpler if you have someone to help you hold the frame in place.

Check that the uPVC hinges open and close in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a particular way or due to poor installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to provide suggestions.

It is also crucial to ensure that the hinges are lubricated regularly. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It can also reduce the risk of a window sticking and prevent corrosion. This should be done at least every year. WD40 or other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. The hinges, also because of wear and tear, may become displaced, which can cause a gap to form where the sash joins the frame. This can be easily repaired by giving them thorough clean, however when they're beyond repair, it might be necessary to get them realigned or replaced. In addition, the interlock could also become unbalanced. This is located on the hinge's side and could require to be cleaned. In some instances it is possible to replace the hinges.

The seals may wear out or get damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and will lessen the possibility of draughts.

Another, and most effective ways to cut down on draughts is by using an draught excluder. These are typically made of fabric filled with some kind of filler. They can be placed on top of your windowsill. They can help block out cold air and keep your home warm and cosy!

With a bit of regular maintenance and repairs your windows made of upvc will continue to provide excellent insulation and security for your home. However, it is important to recognise that windows last for a certain period of time and eventually, they will reach the point when it's more economical to replace them than fix them. So, if you are experiencing problems with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.