• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

Depending on how much does it cost to replace a subaru key old your Subaru is, you might require having the key fob programmed by an automotive or dealer locksmith. This is typically done through the connection of a programming machine to the computer in the car.

To program your Subaru car, you must open the driver's door by pressing the door button and then close it. You will hear the chime, and see the dome lights flashing in the instrument panel.

Step 1: Locate the circuit board of your transmitter

There are many ways to program your key fob. It is first necessary to identify the type of key fob that you own. You can do this by inspecting the shape of the key fob or by listening to the car's sound.

Once you have this information, you can begin the process of programming your key fob at home. You'll require an flathead and a steel key to do this. Open the key fob case by twisting it. Push the metal key into the case and let go of the battery by pressing the tabs that hold it in place. Replace the battery and put the case back together.

Step 2: Unscrew the Key Fob Case

It is recommended to replace the batteries in key fobs in case they're not functioning. In some cases, the buttons on the key fob might be broken. If you notice that the button's metal contacts have become loose You can try applying solder back to them to ensure that they function properly.

Make sure you turn off your ignition and close your doors before you begin. You can accomplish this by closing the driver's door, and then pressing the door button ten times in rapid intervals. Then, you'll hear the instrument panel chime and your dome lights will flash. This indicates that you are ready to move on.

Step 3. Insert the key fob into the ignition

There are numerous articles online that will give you steps on how to replace lost subaru key to program a new or replacement Subaru key fob at home, but they are not precise. Reprogramming an electronic key is best done by an expert auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat of your Subaru with the engine off and all doors closed. Use the door button to open all of the doors. Open and close the driver’s door a second time. Remove and insert the ignition key (don't turn it) 10 times over 40 seconds. The system will sound a chirp when the settings are altered.

Step 4 Step 4: Turn on the ignition

Before you begin this process of key fob programming it is important to remember that this procedure only works when you have a working key already. If you do not then a dealership or auto locksmith will be required to program a new key for your Subaru in Fort Bliss.

Once your key has been programmed you should be able start your car in around five seconds. To begin, ensure that all doors are closed and the engine is off. Then, sit in the driver's seat, and then unlock all doors with the door button control. Insert the key into the ignition and then turn it to the first position. The electrical systems will be activated however, the engine will remain in neutral. Repeat this process 10 times.

Step 5: Unlock Driver's Door

Subaru offers many high-end vehicles with key fobs that lock and unlock doors, turn on the engine, and even defrost windows. These devices may stop working.

To fix this problem to fix it, you must contact an expert locksmith or dealer. This will solve the issue and make sure that your vehicle is secure.

First, open and close the driver's door. Place the key in the ignition and turn it until it is in position 1. Then, turn it back to the off position. Repeat this ten times in the row as fast as possible. After the tenth repetition you should hear an audible sound.

Step 6 Step 6: Press the Lock/Unlock key on the Driver's Door

If you need to replace the battery on the Subaru key fob, the process is simple. First, you must open the exterior fob casing. Make use of a flathead to pry the interior case open and take out the old batteries.

After you have removed the old battery, insert the new one and close the case. Then, get in the driver's chair and unlock all doors using the door button control. Put the key in the ignition and turn the key to ensure that the electrical system is on, however the engine remains off. Repeat this 10 times until you hear a chime sound on the instrument panel. This will put the system into programming mode.

Step 7 Step 7: Press the Lock/Unlock button on the Passenger's Door

For certain owners, the irritating chirp heard when locking and unlocking the Subaru key fob from outside the vehicle can become distracting. In some instances the chirp may be removed by opening and closing all doors, and then a double-click of the lock button on the key fob.

Switch off the ignition and shut all doors as well as the lid of the fuel-filler. Press and hold the lock side of the key fob's lock button for 10 seconds. After this is done the instrument panel will emit an audible chime. The chirp indicates that the fuel-filler lid and door lid are locked. It is possible to alter the setting so that the doors lock automatically and without the need to press a switch.

Step 8 Step 8: Enter your 8-digit Transmitter Number

Note down the initial series of 8-digits and keep it handy. Now, get in your driver's seat, shut all doors and then turn the key to the first position (towards on). After 10 turns, your instrument panel will chime once.

Then, you need to open the key fob case and look for the circuit board that controls the transmitter. There should be two or three sets of numbers (8-digits) on the circuit board. Follow the directions in the guide to register the code. For older models, this process may require a visit the dealer.