• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

You may need the key fob to be programmed by an automotive locksmith or a Subaru dealer, based on the age of your Subaru is. This is usually done by connecting a programming machine to the car's computer.

To program your Subaru unlock the driver's door by pressing the door button and close it. You will hear a chime and see the dome lights blink in the instrument panel.

Step 1: Locate the Transmitter Circuit Board

There are various ways to program your keyfob. You must first identify the type of key fob that you have. You can do this by taking a look at the shape of your key fob or by listening to your car's chime.

Once you've got the information then you can begin the process of programming your keyfob home. To accomplish this, you'll require a metal key and a flathead screwdriver. Open the key fob case by twisting it. Push the key's metal part into the case and then release the battery by pushing the tabs holding it in place. Replace the battery with a new one and put the key fob case back together.

Step 2: Disconnect the key fob case

Change the battery is a good idea since it could revive key fobs that aren't functioning no longer. In some cases, the buttons on the key fob can be damaged. If you see that the metal contacts of the button are loose Try soldering them into place again to make them function again.

Be sure to turn off your ignition and close your doors prior to you begin. You can do this by closing your driver's door and pressing the door button ten times in rapid intervals. You'll then hear the instrument panel chime and your dome light should flash. This indicates that you are in a position to proceed.

Step 3: Insert the Key Fob in the Ignition

There are numerous articles online that will give instructions on how to program a replacement or new Subaru key fob at home, but they are not specifically formulated. Reprogramming an electronic key is best handled by a professional auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat with all doors closed and the engine off. The door button control should be opened and use it to unlock all doors. Open and close the driver's doors two more times. Remove and insert the ignition key (don't turn it) 10 times in 40 seconds. The system should chirp to confirm that the settings have been changed.

Step 4: Turn on the ignition

It is important to know that this method of programming a key fob only is effective if you have a working key. If not then a dealer or auto locksmith will be required to program a brand new key for your Subaru in Fort Bliss.

Once your key is programmed, you should be able start your car in around five minutes. Begin by closing the doors and then shutting off the engine. Next, get in the driver's chair and unlock all doors with the door button control. Place the key into the ignition, turn it on to the first position (the electrical systems will turn on, but the engine is off), and then back to the off position 10 times in rapid succession.

Step 5 Step 5: Unlock the Door of the Driver's Door

subaru forester replacement key cost (Full Content) has a broad selection of luxury cars that come with key fobs, which can lock and unlock doors, start the car, and defrost the windows. These devices may stop functioning.

Contact a locksmith or dealer to solve the issue. This will solve the issue and ensure that your vehicle is safe.

To accomplish this, open the driver's door and close it. Place the key in ignition, and turn it until it is in position 1. Then, it should be returned to the off position. Repeat this ten times in an order as fast as possible. After ten times you should hear a chime.

Step 6 Step 6: Press the Lock/Unlock Button on the Driver's Door

The procedure for replacing a subaru key the battery inside the Subaru remote key fob is very simple. First, open the exterior fob casing. Use a flathead to pry the case's interior open and take out the batteries that were in there.

After removing the battery to replace it, you can replace it with the new one. Close the case. Then, you can sit in the driver's seated position and unlock all doors using the door button control. Finally, insert the key in the ignition and turn it so that the electrical systems are on, but the engine is off. Repeat this 10 times until you hear the chime on the instrument panel. This will turn the system into programming mode.

Step 7 Step 7: Press the Lock/Unlock button on the Passenger's Door

The annoying chirp which can be heard when unlocking or locking the Subaru Key Fob from outside of the vehicle is distracting for some owners. In certain instances you can turn off the chirp by opening and closing all doors while double-clicking the lock button on the key fob.

Close all doors, including the lid that holds the fuel, and turn off the ignition. For 10 seconds you need to press and hold the lock button on the key fob. The instrument panel emits a chime when this is achieved. The chirp indicates that the lid of the fuel filler and door are locked. It is possible to change the setting to make the doors lock automatically without the need to press a switch.

Step 8 Step 8: Enter the 8 Digit Transmitter Number

Write down the first series of 8 numbers and keep it in your wallet. Once you're in the driver's chair, close the doors and turn the key to the first position. After ten turns, your instrument panel should begin to sound at least once.

The circuit board for transmitters is located inside the key fob case. The circuit board should have one or two numbers with 8 digits. Take note of the sequence that starts with the first number, and follow the steps in this guide to register the code in the system of your vehicle. This could mean visiting the dealer for older models.