• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, making it very dangerous and potentially fatal. You should take the time to make sure that your windows are in good condition.

Single-pane windows are fairly simple to replace, and they generally fit into frames that were previously in use very easily. If you have double-paned windows that are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this case, you will need to find some plastic spacers that will assist the new pane to fit properly into the frame of the window.

If you are going attempt to remove the window panes by yourself, it is essential to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a dropcloth before you start working on the glass to ensure that any shards fall onto the cloth rather than on the floor where they could be trampled upon and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will keep water and drafts from entering your home until a professional arrives to repair the window. It also acts as a barrier, deterring any intruders from gaining entry into your home. If the distance between the door and the window is significant, you may prefer security screens that includes windows. This will provide the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can develop a variety of issues such as sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It's crucial to act when you realize that your uPVC windows are sagging.

To fix a sagging window you can try to reposition the hinges. First, you'll need to unblock the windows so you can access the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and test it for fit. If you're satisfied with the fit, tighten the screws to ensure that they stay in place.

If you cannot reposition the hinges, you might have to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and secure from draughts.

uPVC handles can also loosen up. This is usually due to screws that have become undone over time, but it could be due to the handle mechanism wears out. It's relatively easy to fix a loose uPVC hand. You'll first need to close the window and then perform a test fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix that can be completed by any DIY expert. Depending on the severity of the problem the caulking that was used up may need to be removed before a new layer of caulk can be applied. It is important to keep in mind that when it is about uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and can decrease the efficiency of your energy usage.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Mold spots and UPVC Window Repairs rotten sills are other signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

It is also important to remember that if the leak originates from the glass in your double glazed window repairs glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open in a breeze It could be hinges at the fault. These are easily repaired by any skilled DIYer and are usually done within a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that have hinges and like any mechanical part they can wear down over time. It is very easy to replace a hinge on a window, but it's easier if someone helps you to hold the frame.

Check that the uPVC hinges are open and closed in the proper direction. You can check this by looking for the arrow on each hinge, this shows which way the window should open.

The problem with the hinges on windows can be caused by incorrectly opening the window in a certain way or by poor installation at the factory. Sending us a picture via our website will often solve the issue. We are always happy to offer suggestions.

It is also crucial to grease the hinges on a regular basis. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. Ideally, you should perform this every year. WD40 and other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different things. Firstly the hinges, again due to wear and tear may become displaced, which can cause a gap to form between the sash and the frame. This can be easily repaired by giving them a good clean, but if they are beyond repair it may be necessary to have them aligned or replaced. The interlock, which is located on the hinge side of the window, can also be misaligned, and again it may be possible to just give them a thorough clean, however in some cases it might be necessary to have them replaced.

The seals may wear out or become damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and again will lessen the risk of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be hung over your window sill. They can keep your home warm by blocking cold air.

Your upvc windows can continue to provide excellent insulation and security for your home with regular maintenance and repairs. It is important to remember that all windows will eventually get worn out and it may be more cost-effective to simply replace them than to repair them. If you have any problems with your window made of upvc, it's best to consult a professional as soon as possible.